复合泡沫塑料的性能改进研究

为改善复合泡沫塑料的介电性能,采用金属氧化物粒子填充改性双马来酰亚胺空芯玻璃微球复合泡沫塑料得到了高介电常数、低介质损耗因数、低密度、力学性能良好的电介质材料。     

High catalytic activity of PdOx/MnO2 for CO oxidation and importance of oxidation state of Mn

PdO_x/MnO₂ has been examined as a catalyst for CO oxidation using a conventional flow reactor at reaction temperatures between 50 and 150°C. In the reaction conditions of GHSV (gashourlyspacevelocity) of 1.22 × 10⁵/h and CO concentration of 2000 ppm, PdO_x/MnO₂ showed higher catalytic activity compared with PdO_x/Mn₂O₃, which had been previously reported as an effective catalyst due to the cooperative action of Pd and Mn₂O₃ for this reaction. The reason for higher activity of PdO_x/MnO₂ than PdO_x/Mn₂O₃ has been investigated using TPR (temperatureprogrammed reduction) and XPS studies. TPR showed that PdO_x/MnO₂ could be reduced by CO at much lower temperature than PdO_x/Mn₂O₃. During the experiment of reduction and oxidation, XPS showed that the valence of Mn in the PdO_x/MnO₂ was between 4+ and 3+, which is higher than that of Mn in the PdO_x/Mn₂O₃ catalyst of which the valence has been reported to be between 3+ and 2+. It is known that in this catalyst system the support supplies oxygen onto Pd, where the oxidation occurs with adsorbed CO, and the ability of the support to provide oxygen improves the performance of the catalyst. Therefore, it was concluded that the readiness of MnO₂ to be reduced with maintaining a higher oxidation state showed higher CO oxidation activity than Mn₂O₃ as support for PdO_x.     

Nanocrystalline CeO2 in SBA-15: Performance of Pt/CeO2/SBA-15 Catalyst for Water-gas-shift Reaction

CeO₂ particles confined within the pores of an SBA-15 mesoporous silica host were prepared by incipient wetness impregnation (IMP) and deposition precipitation (DP) methods. The materials were characterized by XRD, N₂-adsorption and temperature programmed reduction (TPR) to evaluate the structure, texture, and redox properties. The preparation procedure had significant impact on the assembling mode of CeO₂ inside the SBA-15 mesopores. A high dispersion of CeO₂ particles was achieved via DP, whereas the dispersion of CeO₂ prepared by IMP was found to be inhomogeneous and CeO₂ partially blocked the pores. The CO conversion in the water-gas-shift reaction was enhanced over 1 wt% Pt supported on CeO₂-modified SBA-15 obtained by DP.     

火焰原子吸收光谱法测定硅粉中的铜

介绍了用火焰原子吸收法测定工业硅粉中微量铜的具体方法和过程，同时也给出了最佳实验条件。实验中采用新的样品处理方法，得到了令人满意的结果。其中样品回收率为99．8％—104．0%，相对标准偏差为0．31％—0.38％。本方法在实际应用过程中，简单、快速、     

钛酸铝材料性能及合成工艺

着重介绍了钛酸铝（Al2TiO3）陶瓷的结构、性能和合成工艺，并对今后发展趋势提出了基本观点。     

扩充编码符号的EZW改进算法

为了提高EZW算法的性能,分析发现EZW算法主扫描编码对最高频子带中不重要系数的编码存在冗余,且当重要系数的所有子孙系数都是不重要系数时的编码存在冗余.据此提出了扩充编码符号的EZW改进算法,用最高频子带的坐标作为限制条件来减少不重要系数的编码冗余;通过扩充编码符号和赋予原始EZW算法的4个编码符号新的适用范围的方案来减小第二种编码冗余.实验结果表明,本文算法使峰值信噪比提高0.9～2.3dB,从而证实了本文改进算法的有效性.     

Effective prediction of DEA model by neural network

In this paper,a fast neural network model for the forecasting of effective points by DEA model is proposed,which is based on the SPDS training algorithm.The SPDS training algorithm overcomes the drawbacks of slow convergent speed and partially minimum result for BP algorithm.Its training speed is much faster and its forecasting precision is much better than those of BP algorithm.By numeric examples,it is showed that adopting the neural network model in the forecasting of effective points by DEA model is valid.     

AADL 测试模型的构造研究

目前,结构分析和设计语言AADL在任务关键嵌入式系统领域有着良好的应用.为了保障任务关键软件的质量,文章提出基于AADL测试模型对AADL设计模型进行测试,以发现设计模型中存在的错误.研究给出了体现系统拓扑结构的AADL测试模型的形式定义及由AADL构造该测试模型的算法,基于该测试模型可以对AADL设计模型中构件交互的输入、输出端口序列和连接的正确性进行测试,并以飞行控制系统的AADL设计模型为例,阐释了研究成果.     

凝胶色谱法表征我国几种有代表性超滤膜的截留率——分子量曲线

本文考察了凝胶色谱法的操作压力和进料流速的影响。对国内具有代表性的几种平板超滤膜(聚砜、聚砜酰胺、醋酸纤维素、聚丙烯腈、聚氯乙烯)以及聚砜中空纤维超滤膜的截留率——分子量曲线进行了测定。并给出它们的切割分子量数据。