L-Fuzzy拓扑空间中的半内部、半闭包、半边界、半正则性质

在Ｌ－Ｆｕｚｚｙ拓扑空间中给出了半内部、半闭包、半边界和半正则的定义，讨论了它们的性质，并借助于它们给出了半开集、半闭集、正则开（闭）集的等价刻划．     

Effect of deteriorated microstructures on stress corrosion cracking of X70 pipeline steel in acidic soil environment

In order to investigate stress corrosion cracking (SCC) of X70 pipeline steel and its weld joint area in acidic soil environ-ment in China, two simulating methods were used: one was to obtain bad microstructures in heat affected zone by annealing at 1300°C for 10 min and then, quenching in water; the other was to get different simulating solutions of acidic soil in Yingtan in south-east China. The SCC susceptibilities of X70 pipeline steel before and after quenching in the simulating solutions were analyzed...     

考虑随机风影响的隧道通风量计算

现有隧道内通风量计算偏保守,往往需开启更多风机,导致能源浪费严重。本文提出一种考虑随机自然风影响下的隧道内通风量计算方法。将风频引入隧道通风量计算中,指出隧道内风频的两种表示方法,离散型风频分布和韦布尔风频分布,通过最小误差逼近算法计算韦布尔风频分布中的尺度系数A和形状系数K。通过算例可得,进口处考虑随机风比不考虑随机风的通风量多37.8%,说明考虑随机风影响可明显降低风机开启数量。     

NOET合成方法的改进及其99Tcm标记

本工作主要在ＮＯＥＴ的合成方面做了一些改进,制备出纯度高,稳定性较好的ＮＯＥＴ的钾盐,并探讨了影响＾９９Ｔｃ＾ｍＮ－ＮＯＥＴ标记率的相关因素,由此得出最佳标记条件。在此条件下,＾９９Ｔｃ＾ｍＮ－ＮＯＥＴ的标记率可稳定在９０％以上。     

电弧作用下 AgMeO 触头材料的物理冶金过程分析

本文分析了ＡｇＭｅＯ触头材料电弧侵蚀机理,对电弧的热力作用下触头材料的各种响应从物理冶金本质角度进行全面研究,在此基础上对ＡｇＭｅＯ触头材料组元和组织的优化设计作了完整的分析讨论,提出优化设计判据,最后提出能充分表征触头材料电气使用性能的材料物理性能参数。     

GB/T9945《热轧球扁钢》国家标准修订综述

简要介绍了热轧球扁钢的发展和技术要求,并研究了新标准的修订情况.     

出钢顺立案模型在宝钢炼钢厂的应用

从基本概念和程序的具体实现两方面,阐述了出钢顺立案模型的功能、特点以及在生产实践中所取得的效果。     

Objective Information Theory Exemplified in Air Traffic Control System

Information is the core of Air traffic con-trol system (ATCS).In this paper,objective information theory is extended to depict,model and measure the information exemplified in ATCS.The sextuple model is presented with information ontology,state occurrence time,state set,carrier,reflection time,and reflection set.The metric system is given to quantitively measure the information with extensity,detailedness,continuity,richness,containability,delay,pervasiveness,authenticity,and adaptability.The results show that the proposed method is potential to find out actual indexes in ATCS for flight safety.     

基于函数插值的柯氏质量流量计信号处理方法

对基于离散傅里叶变换(DFT)信号处理方式的柯氏质量流量计来说,影响其精度的关键问题是如何实现信号的整周期采样。提出了一种全新的方法,用采样率固定不变的采样数据,通过软件实时地确定信号的频率并且实现信号整周期重新采样。实验结果表明该方法在求取相位差时具有极高的精度。