Variability of light absorption properties in optically complex inland waters of Lake Chaohu,China

Absorption coefficients of phytoplankton, colored detrital matter (CDM), non-algal particles (NAP), colored dissolved organic matter (CDOM), and their relative contributions to total non-water absorption (a_t ? w) are essential variables for bio-optical and radiative transfer models. Light absorption properties showed large range and variability sampled at 194 stations throughout Lake Chaohu between May 2013 and April 2015. The a_t ? w was dominated by phytoplankton absorption (a_ph) and NAP absorption (a_d). The contribution of CDOM absorption to a_t ? w was lower than 30%. Phytoplankton and NAP were the primary sources of spatial and vertical variability in absorption properties. Light absorption by CDOM, though significant in magnitude, was relatively constant. CDM absorption (a_dg) was dominated by NAP. The spatial variation of the absorption coefficients from each of the optically active constituents were driven by several main inflow rivers in the western and middle part of Lake Chaohu. Algal blooms and bottom resuspension contributed to vertical variability as observed by phytoplankton and NAP profiles. Specific absorption of phytoplankton had significant spatial and seasonal variations without vertical variation. The spectral slope of absorption showed no significant spatial variability (p > 0.05). Variations of absorption affected different ranges of remote sensing reflectance (R_rs) spectrum, thereby increasing the difficulty of applying the remote sensing algorithm in optically complex waters. Parameters and relationships presented in this study provide useful information for bio-optical models and remote sensing of lakes similar to Lake Chaohu in terms of optical properties.     

汽车灯用热熔胶的研究及性能表征

介绍了生产汽车灯用热熔胶的各种原料及其在胶粘剂中所起的主要作用，为汽车灯用热熔胶原料的选择提供了参考。还介绍了汽车灯用热熔胶的制备过程和厂家所需的各种性能及其表征方法。通过选择适当的原料及配比，生产出性能优良并具有良好市场前景的产品。     

基于逐次散射法的海洋-大气矢量辐射传输模式

首先推导了粗糙洋面双向偏振反射模型pBRDF(Bidirectional Polarized Reflectance Distribution Function),并将其与SOSVRT(Successive Order of Scattering Radiative Transfer)矢量辐射传输模式耦合,建立了海洋-大气耦合的矢量辐射传输模式,并对该耦合模式的模拟结果与前人模拟结果进行对比,验证了该耦合模式的可靠性与有效性。不同大气和洋面状态、不同高度的主平面内辐射强度和偏振度的模拟结果表明:pBRDF模型可以很好地模拟不同风速下洋面的偏振反射分布特征;洋面在特定角度具有很高的偏振度,并对大气顶的偏振辐射有很大影响。因此,该耦合模式可以更准确地处理辐射光谱在海洋-大气两种介质间的传输问题,对矢量辐射传输、大气遥感问题的研究有重要意义。     

Android平台下AOA协议的PWM控制系统

Android开放配件(AOA)协议是一种Android终端通过USB总线与Android配件进行通信的协议,该协议为Android终端应用于设备控制和数据采集领域提供了条件。在一些设备控制应用中,有采用Android设备作为控制终端的需求。针对该问题,提出了一个通过Android手机控制Android配件UMFT311EV开发板生成PWM信号的系统。系统基于Android开放配件协议,通过操作Android手机界面控制PWM信号的周期和占空比。首先介绍了系统构成,然后给出了Android终端软件的具体实现,最后以驱动舵机为例进行系统测试。系统实现了Android手机产生参数可控的PWM信号。     

Fabrication and characterization of nano silver powder prepared by spray pyrolysis

Silver powder was fabricated by spray pyrolysis, using 2%–20% AgNO₃ solution, 336–500 mL/h flux of AgNO₃ solution, 0.28–0.32 MPa flux of carrier gas and in the 620–820 °C temperature range. The effects of furnace set temperature, concentration of AgNO₃ aqueous solution, flux of AgNO₃ aqueous solution as well as carrier gas on the morphology and particle size distribution of silver powder, were investigated. The experimental results showed that with the high concentration of AgNO₃ aqueous solution, the average grain size of silver decreased with the increasing of furnace set temperature. But the gain size distribution was not homogenous, the discontinuous grain growth occurred. With the low concentration of AgNO₃ aqueous solution, the higher furnace set temperature made the nano sliver grains sintered together to grow. Nano silver powder about 100 nm was fabricated by spray pyrolysis, using 2wt% AgNO₃ solutions, 336 mL/h flux of AgNO₃ aqueous solution, 0.32 MPa flux of carrier gas at 720 °C furnace set temperature.     

Biologically adaptive robust mean shift algorithm with Cauchy predator-prey BBO and space variant resolution for unmanned helicopter formation

Visual tracking technology can provide measurement information for unmanned helicopter formation and thus, more attention is being paid to this research area. We propose a novel mean shift （MS） algorithm that is both adaptive and robust for unmanned helicopter formation and apply it to the leading unmanned helicopter tracking. The movement of an unmanned helicopter is very flexible and changeable, which makes the tracking there of more difficulty than for common targets. In creating an algorithm that can adapt to the acceleration of the unmanned helicopter and estimates both the scale and orientation of the movement changes, we combine the traditional MS with the bio-inspired Cauchy predator-prey biogeography-based optimization （CPPBBO） evolutionary algorithm, and also the space variant resolution （SVR） mechanism of the human visual system （MS-CPPBBO-SVR）. To demonstrate the effectiveness and robustness of the proposed method and justify the importance of the CPPBBO algorithm and SVR mechanism at the same time, a series of comparative exper- iments were carried out. The experimental results of the proposed MS-CPPBBO-SVR method are compared with other competitive tracking methods, such as MS, MS with SVR （MS-SVR）, MS-SVR with several other optimization algorithms, and the robust particle filter algorithm. The experimental results demonstrate that our proposed tracking approach, MS-CPPBBO-SVR, is more adaptive, robust and efficient in target tracking than the other methods.     

A sub-region one-to-one mapping (SOM) detection algorithm for glass passivation parts wafer surface low-contrast texture defects

Glass Passivation Parts (GPP) wafer texture defects are one of the most important factors affecting the accuracy of wafer defect detection. Template matching has local errors and low efficiency, and deep learning requires many training samples. In the early stage, defect training sample sets cannot be provided. This paper discusses the design of an effective GPP wafer grain region texture defect detection algorithm using a sub-region one-to-one mapping. A set of standard wafer datum is selected as the reference of grain region segmentation detection, and then the standard wafer images and test GPP wafer images are automatically calibrated and segmented, respectively. Then, a series of pre-processes were performed to equalize the sizes of the two grain-region images. Then the grain region was divided into an equal number of rectangular sub-regions of the same size according to the measurement precision requirement. The correlation degree of each test sub-region is judged by the designed three-channel RGB gray-scale similarity decision functions. Experiments show that the algorithm successfully achieved the necessary calibration and segmentation for the grain region. Compared with the template and histogram matching algorithms, the proposed method does not require a training set, the detection accuracy is significantly improved and the detection efficiency is up to 29.74 times better on average using the proposed algorithm.

     

New Robust Stability Criteria for Lur’e Systems with Time-varying Delays and Sector-bounded Nonlinearities

This paper deals with a robust stability problem for uncertain Lur’e systems with time-varying delays and sector-bounded nonlinearities. An improved delay-dependent robust stability criterion is proposed via a modified Lyapunov-Krasovskii functional (LKF) approach. Firstly, a modified LKF consisting of delay-dependent matrices and double-integral items under two delay subintervals is constructed, thereby making full use of the delay and its derivative information. Secondly, the stability criteria can be expressed as convex linear matrix inequality (LMI) via the properties of quadratic function application. Thirdly, to further reduce the conservatism of stability criteria, the quadratic generalized free-weighting matrix inequality (QGFMI) is used. Finally, some numerical examples, including the Lur’e system and the general linear time-delayed system, are presented to show the improvement of the proposed approach.

     

几内亚苏阿皮蒂项目移民安置实施管理模式

水电工程移民是一项复杂的系统工程,也是一个世界级难题。几内亚苏阿皮蒂水利枢纽项目移民规模大,涉及范围广,移民周期长;几内亚没有户籍制度,库区人口及实物指标调查面临极大的困难;缺乏完整的移民法律法规体系和大规模的移民经验,移民工作实施难度大;经济发展水平落后,移民文化水平和生活水平低,生产生活严重依赖耕地。通过采取一系列创新化的移民安置实施管理模式,因地制宜,从多个方面提出苏阿皮蒂项目移民管理模式,取得了较好的成果。     

Analytical investigation on thermal-induced warpage behavior of ultrathin chip-on-flex (UTCOF) assembly

The serious warpage issues of ultrathin chip-on-flex (UTCOF) assembly induced by mismatched thermal stresses have greatly affected the mechanical stability and reliability of emerging ultrathin chip packaging technology. Currently, a theoretical prediction as a convenient and straightforward approach is still lacked for describing effectively the thermal-mechanical behavior of UTCOF during the adhesive curing and cooling process. In consideration of the adhesive thickness approximating to ultrathin chip and flexible substrate thickness, we develop a layerwise-model of ultrathin chip-adhesive-flex structure under plain strain condition, where the behavior of thick adhesive bonding can be described precisely through increasing the subdivided mathematical plies. Further, the analytical results show that the concave and convex forms of ultrathin chip warpage yield at the end of the curing and cooling process respectively. Meanwhile, the effects of its structure dimensions and material properties are also revealed for discussing a way to relieve the extent of ultrathin chip warpage. Additionally, in order to verify the validity of the theoretical prediction, we also introduce the corresponding numerical technique and experimental method. These results suggest that a kind of rigid and ultrathin flexible substrate such as metal foil should be adopted for small warpage of ultrathin assembly.