电梯门机控制系统的运行曲线设计

为了实现电梯轿厢门的开门和关门快速且平稳地运行，介绍了一种基于高性能微型机的门机控制系统结构和门位移的检测原理，以门位移量作为控制系统的反馈量，对门机运行速度进行了分区设计。在高速附近的变化区，门机速度匀速变化时，进行了门机开门和关门控制曲线的计算，推导出运行位移与门机速度具有二次曲线的关系，进而对微型机控制的软件流程进行了设计，达到了门机高低速运行的平稳过渡。最后，给出了实际运行系统的主电路电压波形。     

掺Nd纳米ZnO薄膜特性研究

研究了用真空蒸发法在玻璃衬底上制备稀土掺杂纳米ZnO薄膜结构、导电性及光透射性能。结果显示 ,在 5 0 0℃氧化、热处理稀土元素Nd掺杂后能够明显改善纳米ZnO薄膜的结构特性 ,薄膜的晶粒尺寸随掺杂含量的增加而减小。掺Nd使ZnO薄膜的电性能有所改善但使纳米ZnO薄膜的光透射性有所降低。     

一维ZnO纳米结构的电子场发射研究

在大量制备一维ZnO纳米结构的基础上,研究了这些纳米结构的场发射性能。对于四角状ZnO纳米结构,获得1.0m Ac/m2的电流密度只需要4.5V/μm的电场;对于线状Z nO纳米结构,获得1.0mAc/m 2的电流密度需要6.5V/μm的电场。由于其特殊的结构,四角状ZnO一维纳米结构在真空电子器件方面有很好的应用前景。     

一种新型陶瓷材料及其耐磨性

对新型Ａｌ２Ｏ３－ＴｉＣ－Ｃｏ陶瓷的磨粒磨损，冲蚀磨损及其在单颗粒作用下的摩擦磨损行为进行了研究。与ＡＴ３０（７０ｗｔ％Ａｌ２Ｏ３－３０ｗｔ％ＴｉＣ）陶瓷相比，Ａｌ２Ｏ３－ＴｉＣ－Ｃｏ陶瓷具有更为良好的耐磨性，金属钴的存在提高了基体的韧性，细化了晶粒，其综合力学性能得到了显著提高，ＡＴＣ陶瓷样品耐磨性与其强韧化水平和细致的组织结构有关。     

Hydrogen Permeation and Diffusion in Amorphous Alloy Ni_(68)Cr7_Si_8B_(14)Fe_3 at Elevated Temperature

The behaviour of hydrogen permeation and diffusion in amorphous alloy Ni68Cr7Si8B14Fe3 hasbeen investigated by an ultrahigh vacuum gas permeation technique. A comparison experimentwas carried out between the as-quenched and annealed States (400℃/2h) of the amorphousalloy. The results show that, for both states of the amorphous alloy in the temperature rangeof 200～350℃, the diffusivity and permeability of hydrogen are in agreement with Arrheniusrelationship, there does not exist H-trapping effect, and the activation energies of diffusion andpermeation almost keep the same.     

反应离化团束（RICB）法生长CN硬质薄膜

用反应离化团束（ＲＩＣＢ）法，以低分子量聚乙烯为蒸发材料，氨气为反应气体，在ＮａＣｌ（１００）和Ｓｉ（１００）衬底上淀积Ｃ－Ｎ薄膜，透射电子衍射（ＴＥＭ）分析表明薄膜中含有β－Ｃ３Ｎ４晶粒，Ｘ射线光电子谱（ＸＰＳ）和红外吸收谱（ＩＲ）表明存在Ｃ，Ｎ原子的化学键合。     

Incremental iron overload during reperfusion progressively augments oxidative injury

OBJECTIVE: To determine if a relationship exists between the extent of iron-catalyzed injury and the degree of tissue iron overload during reperfusion. METHODS: To selectively increase tissue iron only during early reperfusion, isolated, buffer perfused rabbit hearts were exposed to 20 microM Fe(2+)-100 microM ADP during the last 3 minutes of ischemia and the initial 4 minutes of reperfusion. Control groups were exposed to ADP and iron-ADP regimens that did not increase intracellular iron. All the hearts received 30 minutes of normothermic global ischemia and 30 minutes of reperfusion. Heart function was monitored continuously throughout each experiment. Tissue iron and biochemical markers were analyzed at the end of experiments. RESULTS: Hemodynamic recovery was decreased and tissue lipid peroxide levels were increased in the 20 microM Fe(2+)-100 microM ADP group compared to controls. The recoveries of developed pressure and positive/negative dP/dT at 30 minutes of reperfusion were negatively correlated with tissue iron levels, while cytosol and membrane lipid peroxide levels correlated positively with the iron levels during reperfusion. CONCLUSION: The extent of oxidative injury during reperfusion was directly related to the tissue iron burden present during reperfusion. Increased lipid peroxidation was the principal chemical marker of iron-catalyzed injury.     

Preparation and Properties of Sintering Additives Coated Si3N4 from Heterogeneous Nucleation Processing

The sintering additives such as Al2O3 and /or Y2O3 were coated on the surfaces of Si3N4 particles via heterogeneous nucleation processing using a buffered pH solution as the precipitation reagent .They nucleated and grew only on the surfaces of Si3N4 and did not form sol particles in solution by TEM observation .The isoelectric point(IEP) of coated Si3N4 was different from that of as-received Si3N4.The IEP of Al(OH)3-coated Si3N4 occurred at pH8.4, which is close to that of alumina .When Al(OH)3-coated Si3N4 particles were coated with Y(OH)3,the IEP of coated Si3N4 powder shifted from pH8.4 to pH9.2 ,similar to that of yttria.In addition ,the rheological data showed that Al2O3 and /or Y2O3 coated Si3N4 suspension is nearly Newtonian and that added Si3N4 suspension shows a shear rate thinning behavior.     

虚拟企业图纸数据传输

图纸数据是企业间合作需交换的一种重要的信息。本文分析了虚拟企业环境下企业之间交换图纸数据的要求，提出了一种具体的解决方案，并给出实例。     

冷成型模具低温锌系磷化

研制出适用于冷成型模具高硬度表面的低温锌系磷化工艺。其中磷化液含Zn(H2 PO4 ) 2 ·2H2 O 6 0g/L ,Zn(NO3) 2 ·6H2 O 90g/L ,NaNO2 1.5g/L ,稀土促进剂 0～ 1.0g/L ,游离酸度 4～ 6点 ,总酸度 70～ 75点。该磷化液在 4 0℃下 ,处理 30～ 4 0min后可获得厚约 10 μm的磷化膜。性能测试表明 ,其减摩、润滑性能良好 ,摩擦系数约降 0 .1,与未处理试样相比磨损量下降 96 % ,附着力 1级。