坑道用水下堵漏剂的研制

坑道水下堵漏剂的研制包括F－1、F－2和F－3型。其中F－1是一种有机堵漏剂，它可以在水中固化；F－2是一种无机防水堵漏剂，施工方便；F－3是速凝型，它可在瞬间固化，能对坑道的涌水口进行堵漏。     

Hartstoffschichten für das Pressen und Prägen von Gläsern bei hohen Temperaturen

Hard and wear resistant coatings for the moulding and embossing of glasses at elevated temperatures Hard and wear resistant coatings of Titanium Aluminium Nitride TiAlN were deposited on various substrates by the application of different reactive deposition processes: RF-magnetron-sputtering, ion beam-sputtering and by the energetic cluster impact (ECI) process. The deposition of the coatings was performed under variation of biasing conditions and of process parameters such as pressures and flow rates of the process gases argon and nitrogen as well as of energies of species hitting the substrate surfaces. The microstructure particularly the growth morphology of several films was investigated by pictures of film cross sections recorded by transmission electron microscopy. Residual intrinsic film stresses were analyzed by measuring deflections of substrates in an interference optical microscope before and after the deposition of the coatings. By heating coated substrates and in-situ observation of deflections at elevated temperatures dependencies of thermally induced stresses on temperatures and variations of intrinsic stresses due to changes within the films could be analyzed and related to microstructure and growth conditions. In the paper specific characteristics of the deposition processes occuring on the scale both of atoms and of clusters which may contain several thousand of atoms are described and related to microstructure, residual stress states and damaging conditions. Different contributions to residual film stresses are analyzed on the base of theoretical considerations taking into account deposition kinetics and thermomecanical properties. The significance of achieved film properties for application, i. e. for the coating of tools for the manufacturing of optical components by moulding and embossing of glasses is discussed.     

Plasma properties of laser-ablated St target in air

Ｐｌａｓｍａｐｒｏｐｅｒｔｉｅｓｏｆｌａｓｅｒ－ａｂｌａｔｅｄＳｔｔａｒｇｅｔｉｎａｉｒＷａｎｇＸｉａｎｇ－Ｔａｉ（王象泰）；ＭａｎＢａｏ－Ｙｕａｎ（满宝元）；ＷａｎｇＧｏｎｇ－Ｔａｎｇ（王公堂）；ＦａｎＸｉ－Ｊｕｎ（樊锡君）；ＷａｎｇＪｕｎ（王军）...     

一幅画

从吃饱到吃好、吃精至吃的环境,人们对生活的要求逐渐趋向艺术化,餐馆老板会把环境设计与经营放在同等地位,所以好的餐饮空间层出不穷,也是社会发展的必然产物。位于宁波老外滩的瀚珍舫餐馆,建筑一层的面积较小,二、三层呈狭长形,做为餐馆这样的建筑条件并不理想,设计师把包厢和雅座设置在两边,这样走廊显得更幽深,柱子阵列得更有气势。拆除原先的楼梯,做了一部上下错位且不规则楼梯,曲折向上,增强了空间的层次。通顶的储酒柜,从三楼悬下的八米长吊灯,把一至三楼不落痕迹地融为一体。要设计一个好作品,设计师的构想需要不停地游走。碰撞的激情仿佛是一幅画,渐渐地,它的轮廓清晰了,色彩明朗了,它的主题神秘而遥不可及,每个人的心扉都有不同的暗香飘逸。掩映在现代手法中的精致、深沉从骨子里透出古典优雅     

Self-aligned diffusion technique for n-InP JFETs

A self-aligned diffusion process has been demonstrated in the fabrication of n-InP JFETs on semi-insulating InP. This process utilises the anisotropic and selective etching properties of InP/GaInAs materials. Using this technique, sub-micrometre gate lengths can be achieved even with conventional photolithography. Devices with trans-conductance of >35mS/mm, leakage current of < 10nA/mm and gate capacitance of <0.7pF/mm have been fabricated with a cutoff frequency of 7 GHz.     

A simplified dispersion limit formula for IM/DD systems and itscomparison with experimental results

A simplified formula for the dispersion limit of single-mode-fiber intensity modulation/direct detection (IM/DD) systems is derived for arbitrary given normalized pulse width U, eye opening penalty X and source linewidth enhancement factor α. From the comparison with published theoretical analyses, computer simulation and experimental data, its validity and the limits of existing formulae are shown. Using this simple and general formula, one can easily obtain the dispersion limit of various fiber types under different working conditions in IM/DD systems     

γ 射线引发 VAc 乳液聚合以制备白乳胶的动力学及工艺条件研究

研究了ＶＡｃ的辐射乳液聚合动力学，并对其聚合工艺条件作了初步探索。得出ＶＡｃ乳液在进行辐射聚合时，成核期结束较早（转化率在１０％以下），有相当长的恒速期存在。乳胶粒子直径在０．５～３μｍ之间，比一般的乳液聚合乳胶粒子要大。同时从动力学数据还可以看出几种成核机理（胶束成核，水相成核和液滴成核）同时存在，由此对试验条件提出了相应的要求。     

从光合作用的倒掉说起

席殊书屋、第三级书局走了,风入松、纸老虎世纪城店关了,我没太在意。2010年10月底,有着36家连锁店的光合作用竟然也宣告倒闭了!我终于淡定不起来了。清华大学出版社零售产品经理王川（简称川）清华大学出版社图书编辑刘青（简称刘）记者Justdo（简称J）新华书店＋网购是必然趋势J：光合作用倒闭了,你们惊讶吗？刘：其实我挺惊讶,因为我常去,特别是五道口那家店,从刚开业起就经常去逛。     

金湖县防汛信息化的现状分析与对策研究

水利信息化作为水利现代化的基础和标志,是防洪减灾、水资源管理、水环境监测和水土保持的重要手段和技术支撑,是提高水利管理工作效率和效能、实现水利服务社会的重要途径和必然要求,是改造传统水利、促进水利改革与发展的重要措施和迫切需要.阐述了目前水利工程现状和非工程措施建设现状,存在的问题及需求分析,并提出相关解决对策.     

Incorporating Actor-Critic in Monte Carlo tree search for symbolic regression

Neural Computing and Applications - Most traditional genetic programming methods that handle symbolic regression are random algorithms without memory and direction. They repeatedly search for the...