Transient behaviour of encapsulated enzyme reactor systems

Mathematical models are developed for the transient behaviour of encapsulated enzyme reactor systems such as the continuous stirred tank reactor (CSTR) and the packed bed tubular reactor. The rate processes taking place in the encapsulated enzyme bed are approximated by using a combined rate control model of enzyme reaction and membrane diffusion. The change in transient substrate concentration is obtained by using the developed rate expression in the material balance over the substrate as a function of time for the CSTR and as a function of time and position for the packed bed tubular reactor. The effects of various parameters such as the enzymic reaction rate constant, Michaelis constant, diffusional resistance of membranes, and Peclet number on the substrate concentration distribution, which varies with respect to operating time, are investigated. This study affords insight into the transient operating characteristics of the encapsulated enzyme reactor system. The results should be useful in understanding the start-up performance of the reactor systems and to control such reactor systems at desired operating conditions.     

An efficient recursive rotational-coordinate-based formulation of a planar Euler–Bernoulli beam

Multibody System Dynamics - A recursive rotational-coordinate-based formulation of a planar Euler–Bernoulli beam is developed, where large displacements, deformations, and rotations are...     

Chaos synchronization with dual-channel time-delayed couplings

While the significance of oscillator dynamics and coupling structure to synchronization behaviors has been well addressed in the literature, little attention has been paid to the possible influence of coupling functions. In the present paper, adopting the scheme of dual-channel time-delayed couplings, we investigate how the synchronization behaviors of networked chaotic oscillators are influenced by parameters in the coupling functions. It is found that, with the introduction of the second coupling channel, the synchronization region, as calculated according to the method of master stability function (MSF), can be largely modified. In particular, by a slight change of the time delay, it is found that the synchronization region can be significantly adjusted, or even switched from non-existing to existing. We demonstrate this interesting phenomenon for both situations of processing and propagation induced time delays, as well as for different coupling functions. Our studies shed new light on the mechanism of chaos synchronization, and may potentially be used for the control of complex network dynamics.     

目标追求的入世和出世对框架效应的影响

采用目标追求的入世、出世量表筛选出入世水平高组(70名)和低组(72)大学生,出世水平高组(68名)和低组(71名)大学生,探讨不同入世、出世水平大学生在奖学金申请、选修课和求职应聘三种决策任务领域上的框架效应及其在性别上的特点。结果发现:(1)不同出入世水平大学生在决策任务上的框架效应特点不同,入世水平高分组和低分组、出世水平高分组和低分组在奖学金申请问题上均出现了经典的框架效应;(2)在奖学金申请问题上,男性被试和女性被试的选择出现了明显的经典的框架效应。     

Effect of substrate pretreatment on the porosity in thin nickel electrodeposits

Substrate pretreatment affects the porosity of thin nickel electrolytic coatings which is a combined function of the composition and the roughness of the substrate surface. Electropolishing the substrate surface is an effective method of reducing coating porosity, whereas coatings plated on either electroetched or mechanically ground substrates are relatively porous owing to the remaining oxide layer on the substrate and the increased roughness of the substrate. For nickel coatings plated on mechanically ground rough substrates, the relationship between nickel porosity, apparent coating thickness and substrate roughness has been examined.     

Sr对高铁Al-Si合金组织和性能的影响

研究了Sr元素（加入量分别为0．03％、0．06％、0．09％、0．12％和0．18％）对含Fe量为1．2％的ZL102合金的组织和性能的影响。研究发现，随着Sr元素的加入，合金中粗大的针状Fe相开始出现断裂分叉现象，同时针状Fe相的长度也随Sr元素加入量的增加而减小，但Sr对Fe相的针状形貌没有明显改变。随着Sr元素加入量逐渐增加，合金的抗拉强度和伸长率均呈现出先增后减的变化趋势。当Sr元素加入量达到0．12％时，合金材料的综合力学性能最佳。     

用于预焙槽炼铝的多功能地面专用操作设备

主要介绍了预焙槽炼铝另外一种操作方式的专用设备———多功能地面操作车辆 ,分别对更换阳极打壳专用车、阳极覆盖加料车、出铝叉车进行了介绍 ,并总结了这些操作设备的优点及对我国铝工业的可借鉴之处。     

BREAKAGE MECHANISM OF TUNGSTEN BASED ALLOY BLOCK FOR ELECTRO-HEAT UPSETTING

The breakage mechanism of W-Ni-Fe alloy in the process of electro-heat upsetting studied both theoretically and experimetnally, and also the behaviors of crack formation and propagation were analysed. Alloy suffers from corrosion and thermal-mechanical fatigue mutual function. Simultaneously, the practical ways to improve the anvil life was discussed.     

基于文本分析的自动化疾病编码方法

对疾病进行编码是将疾病诊断名称转化为标准ICD(国际疾病分类)编码的过程.鉴于编码量庞大和人工编码效率低等原因,有必要实现疾病编码的自动化.提出一种自动化的疾病编码方法,使用一种文本建模方法将ICD表示为文本集,然后借助文本相关性度量,获取与待编码疾病诊断名称最相关的ICD编码.经实验验证,本文提出的自动化疾病编码方法准确率较高、效率优秀、分类层次变换灵活,可广泛应用于各种类型的数据分析场景.