工作流技术及其应用研究

文章介绍了工作流技术及其发展历史,对工作流的系统模型进行了详细分析,探讨了工作流技术在企业管理信息系统中的实际应用。     

无线区域网和认知无线电技术3

802．22 工作组的主要任务是开发和建立一套基于认知无线电(CR)技术, 在现有电视频段利用暂时空闲的频道进行无线通信的区域网空中接口标准。由于基于802．22 协议的无线区域网(WRAN)工作在现有电视频段中 , 要求不能对正在广播的电视频道产生干扰 , 所以WRAN采用了认知无线电技术 , 对电视频段进行感知和测量 , 利用动态频谱管理技术找到空闲频道进行再分配。认知无线电技术将是未来无线通信的发展方向之一。本讲座分3 期对无线区域网和认知无线电技术进行介绍, 第1 讲已经介绍无线区域网络和IEEE 802．22工作组情况 , 包括WRAN背景、802．22 系统、802．22空中接口等；第2讲已经介绍认知无线电技术和实现其的基础软件无线电(SDR)技术 , 包括无线电知识描述语言(RKRL)和认知循环、无线电频谱礼仪等；本讲介绍802．22 WRAN频谱共存问题和认知无线电技术的应用。     

基于混合智能的多Agent个性化信息推荐

在基于Agent的个性化网页推荐中，目前主要有两种过滤方法：基于内容的过滤和基于多Agent合作的过滤。在分析了单独使用这两种方法存在的不足之后，提出了基于改进蚁群算法的聚类分析建立用户模型的算法，并给出了结合两种方法优点的用户模型主动学习算法，最后给出了个性化信息推荐模型及相关算法。     

TUD-DNS3脱硝助剂在催化裂化装置的工业应用

TUD-DNS3脱硝助剂在中韩（武汉）石油化工有限公司1号催化裂化装置上进行了工业应用。结果表明：针对两段再生工艺，当系统中助剂占总催化剂藏量的质量分数为2.6%时，烟气脱硫装置外排污水中的氨氮质量浓度由加剂前的100 mg/L下降至40 mg/L以内；助剂的加入降低了CO焚烧炉的炉膛温度，有利于烟气的合格排放，并对装置操作、产品分布及汽油、柴油产品质量无不良影响。     

Iterative detection/decoding for two-track partial response channels

In this letter, we investigate the iterative detection/decoding algorithms for two-track partial response channels. We first describe the iterative algorithm as an iterative message-passing/processing algorithm over a high-level normal graph and then propose two trellis-based detection algorithms. The natural one is based on a joint trellis, which can be implemented for low-order channels. For moderate-order channels, we propose a separated detection, which is based on two single-track trellises. Compared with the joint detection, the separated detection is simpler in most cases. Simulation results show that, for two-track EPR4 channels with minor intertrack interferences, the separated detection causes only marginal degradation in performance.     

新型的芯片间互连用CMOS/BiCMOS驱动器

从改善不同类型 IC芯片之间的电平匹配和驱动能力出发 ,设计了几例芯片间接口 (互连 )用 CMOS/Bi CMOS驱动电路 ,并提出了采用 0 .5 μm Bi CMOS工艺 ,制备所设计驱动器的技术要点和元器件参数。实验结果表明所设计驱动器既具有双极型电路快速、大电流驱动能力的特点 ,又具备 CMOS电路低压、低功耗的长处 ,因而它们特别适用于低电源电压、低功耗高速数字通信电路和信息处理系统。     

A new way for multidimensional medical data management: volume of interest (VOI)-based retrieval of medical images with visual and functional features.

The advances in digital medical imaging and storage in integrated databases are resulting in growing demands for efficient image retrieval and management. Content-based image retrieval (CBIR) refers to the retrieval of images from a database, using the visual features derived from the information in the image, and has become an attractive approach to managing large medical image archives. In conventional CBIR systems for medical images, images are often segmented into regions which are used to derive two-dimensional visual features for region-based queries. Although such approach has the advantage of including only relevant regions in the formulation of a query, medical images that are inherently multidimensional can potentially benefit from the multidimensional feature extraction which could open up new opportunities in visual feature extraction and retrieval. In this study, we present a volume of interest (VOI) based content-based retrieval of four-dimensional (three spatial and one temporal) dynamic PET images. By segmenting the images into VOIs consisting of functionally similar voxels (e.g., a tumor structure), multidimensional visual and functional features were extracted and used as region-based query features. A prototype VOI-based functional image retrieval system (VOI-FIRS) has been designed to demonstrate the proposed multidimensional feature extraction and retrieval. Experimental results show that the proposed system allows for the retrieval of related images that constitute similar visual and functional VOI features, and can find potential applications in medical data management, such as to aid in education, diagnosis, and statistical analysis.     

ADIC iPlatform智能磁带库体系结构

本文介绍了ADIC iPlatform智能磁带库体系结构。     

Comments on "An efficient PML implementation for the ADI-FDTD method"

For original paper see Wang and Teixeira (IEEE Microwave Wireless Comp. Lett., vol.13, p.72-4, 2003 February). In this paper, a more precise way to evaluate the actual performance of the perfectly matched layer (PML) used for the alternating direction implicit finite-difference time-domain (ADI-FDTD) method is presented. It is shown that the intrinsic numerical dispersion error of the ADI-FDTD method must be taken into account when the actual performance of the ADI-PML (as well as the ADI-FDTD method) is evaluated. Most importantly, it is demonstrated that the ADI-PMLs implemented with either the traditional manner or the way proposed in have almost the same level of accuracy when the performance of the ADI-PML is correctly evaluated.     

磷酸酯类离子液体在燃油深度脱硫中的应用

研究了3种磷酸酯类离子液体,即1,3-二甲基咪唑磷酸二甲酯盐([MM im]DM P)、1-乙基-3-甲基咪唑磷酸二乙酯盐([EM im]DEP)和1-丁基-3-甲基咪唑磷酸二丁酯盐([BM im]DBP)的制备过程,考察了这3种磷酸酯类离子液体对模型油中3-甲基噻吩、苯并噻吩和二苯并噻吩的脱除效果及磷酸酯类离子液体的电化学再生方法。实验结果表明,这3种磷酸酯类离子液体的脱硫能力强弱顺序为:[EM im]DEP>[BM im]DBP[MM im]DM P;且对二苯并噻吩的脱除效果最好,对苯并噻吩的脱除效果次之,对3-甲基噻吩的脱除效果较差。以[EM im]DEP为萃取剂,油剂质量比为1∶1时,经5次萃取后,二苯并噻吩的脱除率可达到99.5%。利用电解法对[EM im]DEP进行了再生,在5~10V电压下电解10h,[EM im]DEP的脱硫率可以达到新鲜[EM im]DEP的90%以上。