高炉炉缸内铁水环流与内衬侵蚀

从分析中心焦柱在炉缸内的受力出发，计算了１０００￣５５８０ｍ＾３高炉大喷煤前后中心焦柱在炉缸铁水内的沉入深度，分析了炉缸内铁水环流的产生与炉缸内衬侵的关系，分析表明大喷煤有得利抑制铁水环流对缸内补的冲刷，提出了降低铁水环流对炉缸内衬侵蚀的途径。     

一种微机控制的多测头凸轮轴测量系统

本文介绍一种由机械装置，高精度圆光栅编码器，光栅位移传感器，微型计算机，接口控制电路等组成的多测头凸轮轴测量系统，该系统安装调整方便，定位准确，测量精度高，操作简单，工作可靠，能快速实现对凸轮轴的自动测量。     

Study on percutaneous rate of P-aminobenzoates using molecular orbital method

The use of a dome osteotomy in the treatment of infantile tibia vara is reportedly associated with insufficient intraoperative assessment of the correction achieved. This article discusses a method to overcome this problem and the long-term advantages of using a dome osteotomy in the treatment of this disease.     

SURF1, encoding a factor involved in the biogenesis of cytochrome c oxidase, is mutated in Leigh syndrome

A drug with cationic characteristics such as procaine can be conveyed in a Carbomer hydrogel in two different ways: (i) in the form of salt in solution in the aqueous phase, and (ii) in the base form salified with the same polymer. Introduction of the drug into the hydrogel with different concentrations of polymer produced, in both cases, a reduction in viscosity in relation to drug concentration. The gels with procaine salified with the polymer showed greater viscosity. The drug release rate, in general, diminished with the increase in polymer concentration. Nevertheless, when this concentration was maintained, there was no variation in release rate when the viscosity produced as a consequence of drug concentration was changed. Gels with procaine salified with the carboxyvinylic polymer had a faster release rate than those with procaine in the hydrochloride form dissolved in the aqueous phase. These results have also been confirmed by a simulated absorption test.     

动态交联热塑性弹性体增韧聚丙烯合金

用动态交联方法制备聚烯烃热塑性弹性体（ＴＰＯ）增韧聚丙烯，制备了具有低温冲击性能良好、综合力学性能比较均衡的聚丙烯合金。同时，研究了ＴＰＯ组成、工艺及基体组成与ＴＰＯ增韧聚丙烯共混物力学性能的关系。并通过差热扫描量热计和扫描电镜考察了共混物的形态结构。     

Determination of the in situ forces and force distribution within the human anterior cruciate ligament

The in situ forces and their distribution within the human anterior cruciate ligament (ACL) can clarify this ligament's role in the knee and help to resolve controversies regarding surgical treatment of ACL deficiency. We used a universal force-moment sensor (UFS) to determine the magnitude, direction, and point of application of the in situ forces in the ACL in intact human cadaveric knees. Unlike previous studies, this approach does not require surgical intervention, the attachment of mechanical devices to or near the ACL, or a priori assumptions about the direction of in situ force. Anterior tibial loads were applied to intact knees, which were limited to 1 degree of freedom at 30 degrees flexion. The in situ forces developed in the ACL were lower than the applied force for loads under 80 N, but larger for applied loads of more than 80 N. The direction of the force vector corresponded to that of the anteromedial (AM) portion of the ACL insertion on the tibial plateau. The point of force application was located in the posterior section of the anteromedial portion of the tibial insertion site. The anterior and posterior aspects of the anteromedial portion of the ACL supported 25% and 70% of the in situ force, respectively, with the remainder carried by the posterolateral portion. We believe that the data obtained with this new UFS methodology improves our understanding of the role of the ACL in knee function, and that this methodology can be easily extended to study the function of other ligaments.     

电视监控系统云台控制器设计

电视监控系统是一种典型的分布式计算机信号采集系统。为了提高监控的范围和效果,云台控制器的优劣直接影响监控的范围和效果,因此对云台控制器的设计具有重要的意义。本系统采用串型通信,通过Modbus协议把控制信号输入单片机,经过对AT89S52单片机的编程,从而对八路继电器输出进行控制。系统不仅结构简单,而且还可以方便的对镜头、防护罩的控制进行扩展,功能强大,可以广泛应用于电视监控系统中的云台控制。     

一种新的码片内多径时延估计方法

根据信道冲激响应的稀疏特性,提出了一种频域的时延估计压缩感知模型,将时延估计问题转化为基于欠采样数据的稀疏向量估计问题.利用离散傅里叶变换(Discrete Fourier transform,DFT)矩阵的子矩阵所满足的受限等距性(Restricted isometry property,RIP)以及信道冲激响应的稀疏特性充分降低了时延估计所需数据量的要求.分析了本文模型具有码片内多径分辨能力以及良好抗噪性能的原因,并与多信号分类(Multiple signal classification,MUSIC)和旋转不变技术的信号参数估计(Estimation of signal parameters via rotational invariance technique,ESPRIT)算法的时延估计性能进行仿真比较.仿真结果表明,本文提出的方法不需要预知多径的条数,对码片内多径时延具有较高的估计精度,其时延估计性能在特定条件下优于MUSIC和ESPRIT算法.     

Bio-inspired self-organized cooperative control consensus for crowded UUV swarm based on adaptive dynamic interaction topology

Applied Intelligence - Cooperative control is currently a challenging topic of crowded unmanned underwater vehicle (UUV) swarm. However, individual behavior conflict and chain-avalanche collision...     

基于MAX16802B的水下相机控制系统设计

水下相机对海洋生物科学研究有重要意义,其控制系统的设计关键在于光源控制方案以及电源效率的提高;提出并实现了一种基于低功耗微控制器、高亮LED光源以及LED控制驱动器MAX16802B的水下相机控制系统,详细介绍了系统组成,并给出了基于低功耗策略的硬件和软件优化设计方案;实验结果表明,该设计方案电路结构简单,稳定性好,电源效率达75%以上,能够满足长时间水下拍摄工作;在实际海下测试中,按20分钟的拍摄间隔需求,水下相机可连续工作2个月以上。