Study and design of step-index channel waveguide bends withlarge-angle and low-loss characteristics

By using micro-prisms, improved three-dimensional (3-D) bends of the embedded and buried waveguides of step-index profile are proposed. A simple phase compensation rule for the optimal design of the micro-prism is also presented. Through the simulation of 3-D semivectorial finite-difference beam propagation method, the transmission characteristics of the improved bends are shown to have been enhanced dramatically as compared with those of the conventional ones. Even for a bend angle of as large as 10°, the normalized transmitted power can still be greater than 95%. These results of 3-D bends are then compared with those of the two-dimensional (2-D) ones which are simplified from 3-D structures by the effective index method, and physical explanation of the discrepancy between the 3-D and 2-D results is introduced. The influences of waveguide structures and prism parameters on the transmission characteristics are discussed in detail. Some criteria for the design of large-angle low-loss 3-D improved bends are also accessed     

Study of 18-cm long single-sided AC-coupled silicon microstripdetectors

The SSC GEM silicon Central Tracker design incorporated 18-cm long single-sided AC-coupled silicon microstrip ladders. Compared to the 12-cm long ladders considered in the preliminary stages of the tracker design, the 18-cm long ladders have the advantage of reduced cost, channel count and overall power consumption, and led to a simplified tracker assembly. However, such long ships also present the challenge of maintaining satisfactory performance. The increased capacitance and series resistance contribute to lower signal-to-noise ratios, longer time walk, higher power consumption per channel and increased probability of crosstalk to neighboring channels. In this paper, an accurate method to calculate the geometric capacitance of the AC-coupled microstrips is presented and the calculated results are compared with measurements, SPICE simulations are performed to predict the noise, the extent of interstrip capacitive coupling and the dispersion of the detector signal due to the finite series resistance of the metal strips and the long length of the detector. The influence of the preamplifier current and the shaping time on the signal and noise levels is also presented. The study concludes that the 18-cm long ladders can successfully satisfy the performance goals of the GEM silicon Central Tracker     

肝癌碘油栓塞后肝区平片所见碘油沉积量与疗效关系

本文分析了90例肝癌肝动脉灌注化疗碘油栓塞后,肝区平片所见碘油沉积量和疗效的关系。碘油沉积分为多,中,少三组,从ATP下降,肿瘤缩小率及一年生存率三方面比较。结果沉积多的与中等组三项都有显著差别;沉积中等的与少的组差别不明显。说明碘油沉积要达到一定的量后,疗效才会显著提高。同时分析了影响碘油沉积的几个因素。     

β″－Al_2O_3陶瓷的强化和韧化

研究了稳定ＺｒＯ＿２和部份稳定ＺｒＯ＿２对β″－Ａｌ＿２Ｏ＿３陶瓷的强化和韧化作用，观察了不同种类、不同含量的ＺｒＯ＿２对β″－Ａｌ＿２Ｏ＿３陶瓷的显微结构、力学性能和电导率的影响，探讨了β″－Ａｌ＿２Ｏ＿３的韧化机理。     

Determination of the width of the transition layer between the crystalline and amorphous zones in nylon 1010 by SAXS

The width of the transition layer between the crystalline and amorphous zones in nylon 1010 was determined by SAXS with point collimation and long-slit collimation, respectively. The width of the transition layer, E, was found to be 1.7 nm. The results show that the width of the transition layer is independent of crystallinity.     

Multiple negative-differential-resistance (MNDR) phenomena of ametal-insulator-semiconductor-insulator-metal (MISIM)-like structurewith step-compositioned InxGa1-xAs quantum wells

In this paper, a new multiple negative-differential-resistance (MNDR) device based on a metal-insulator-semiconductor-insulator-metal (MISIM)-like structure with step-compositional In_xGa_1-x As quantum wells has been fabricated and demonstrated. The interesting MNDR phenomena are found in the current-voltage (I-V) characteristics of this device. At room temperature, the triple switching behaviours and quadruple stable operation states are obtained. In addition, the sixfold switching behaviors and a staircase-shaped I-V characteristic are observed at -105°C. A sequential carrier accumulation at InGaAs subwells and the potential lowering process are used to qualitatively explain the interesting MNDR phenomena. From the experimental results, it is shown that the studied device has good potential in multiple-valued logic applications     

Ethnic differences in the length of the menstrual cycle during the postmenarcheal period

In 1989, 125 African-American and 123 European-American girls aged 12-14 years were enrolled in a 2-year study in which they maintained a menstrual calendar, recording the date and amount of menstrual bleeding. Weight, exercise, and stress during the previous week were recorded at the start of each menstrual cycle. Although only minor ethnic differences were observed in expected cycle length (29.3 vs. 28.8 days for European-American and African-American girls, respectively), more prominent differences were observed in the between-subjects standard deviation of cycle length (2.9 vs. 2.2 days, respectively) and in the odds of having a cycle longer than 45 days (odds ratio=1.86, 95% confidence interval 1.17-2.97) for European-American compared with African-American girls. Low weight for height and high levels of exercise increased the probability of having a cycle longer than 45 days and decreased expected cycle length of 13- to 45-day cycles. Additional investigation of potential ethnic differences in menstrual cycle characteristics is warranted.     

Peripheral nerve stimulation in a whole-body echo-planar imaging system

Echo-planar techniques in MRI use a rapidly oscillating frequency-encoding gradient with the potential to produce peripheral nerve stimulation. To evaluate the incidence, type, and location of stimulation in a commercial whole-body scanner, we studied two groups: (a) 173 consecutive individuals scanned by echo-planar imaging for other purposes and (b) seven subjects who were scanned with an extensive set of 36 echo-planar sequences (with prompting after each scan to report any peripheral nerve stimulation) to test the effects of various parameters. Although only 5% of group A reported symptoms of peripheral nerve stimulation, all in group B experienced some type of stimulation, dependent primarily on direction of the oscillating gradient and location of the body within the gradient coil. Maximum stimulation typically occurred 30 to 40 cm from isocenter in the region of maximum dB/dt. Generally, y gradients produced truncal stimulation, and x gradients produced stimulation in the head. When hands were clasped over the abdomen, a tingling in the hands occasionally was felt. Patients should be instructed to keep their hands apart.     

氧化铝/锌合金复合材料界面的SEM观察

利用挤压铸造制备氧化铝／锌合金复合材料，在扫描电镜（ＳＥＭ）上观察复合材料的界面。结果表明，在复合材料中纤维与基体间存在致密界面层，合金元素通过适当的化学反应可改善纤维与基体间的结合；在凝固过程中，纤维／基体界面上的硅在共晶体的共生生长过程中起了领先相作用，导致复合材料的共晶转变是由铝硅共晶转变和锌铝共晶转变两者组成。