FAST MEASUREMENT OF ASH CONTENT IN COAL WASHING PLANT

The coal filter cake is a product of fine coal after floatation which has an ash content of 7-13%, water content of 30±2%, and a particle size of less than 1 mm. The ash content was measured by the intensity of the single backscattered gamma-ray, and its accuracy is mainly dependent on the energy of the gamma-ray. The 238Pu low energy photon source is selected in this work. The energy of its gamma-ray is 15 keV, which can result not only in the best sensitivity, but also in the lowest contribution to the environment radiation. The root mean square deviation of the ash measurement is±0.33% (±1σ).     

Study of the Mössbauer effect on rare-earth borided surface layers on pure iron

Journal of Materials Science Letters -     

A new method for calculating loss coefficients [of power systems]

A method is proposed which avoids many limitations associated with traditional B-coefficient loss coefficient calculation. The proposed method, unlike the traditional B-coefficient method, is very fast and can handle line outages. The method utilizes network sensitivity factors which are established from DC load flow solutions, Line outage distribution factors (ODFs) are formulated using changes in network power generations to simulate the outaged line from the network. The method avoids the use of complicated reference frame transformations based upon Kron's tenser analysis. The necessity of data normalization used in least squares and the evaluation of the slope of &thetas;_j versus PG_n is not necessary with the proposed method. Using IEEE standard 14-bus and 30-bus systems, the method's results are compared against results obtained from an AC load flow program (LFED). The method's solution speed is compared to that of the LFED method, the base case database method and the conventional B-coefficient method based on A_jn-factor. The proposed method is easy to implement and, when compared to other methods, has exhibited good accuracy and rapid execution times. The method is well suited to online dispatch applications     

压力容器材料质量控制的几个重要环节

针对压力容器材料方面存在的问题,从设计、采购、检验、制造等环节进行了分析,根据实际情况确定材料的质量控制要点。材料使用前要通过各种检测手段,判断材料的真实性,确保所用材料合格;并应从设计、选材、采购、计划、填报内容和选择可靠的供应方等方面加以控制,确保材料的正确使用,为压力容器产品的材料控制提供借鉴。     

美国的灭火与救援机器人研发综述

设想某一个城镇生产木材调色板的流水线车间里 ,由于电器原因引发了一场火灾 ,致使建筑物坍塌。没有人能够确切地说出有多少工人被埋压在里面 ,更糟的是 ,当毗邻墙体坍塌时 ,隔壁的旧轮胎储藏室也被埋压在下面。于是市消防局派遣一批机器人去现场救援。第一个到达的机器人进入现场调查情况 ,该机器人能忍耐80 0℃的高温炙烤 ,身上安装了摄像机 ,可以给 90 m外的控制室发送图片 ,控制室的指挥人员就可以根据图片决定是否派消防队员冒险进入现场。第二个机器人是无人驾驶卡车 ,进入后便从 75 m远的地方以2 6 gal/ s的速度往火场喷水 ,并用它所…     

专家系统在化工中的应用进展

本文综述了近年来专家系统在化工领域的应用状况，并指出今后的发展趋势。     

石膏制品防水防潮剂的研制与开发

本文提出采用高分子有机材料配合，生产石膏制品防水防潮剂的生产方法和工艺。该剂还可以应用到氧化镁系列板材，同时提出开发珠光或彩色防水防潮剂，能达到满足的装饰效果，值提开发推广。     

利用热管纺丝技术一步法生产FCY

利用平板型热管纺丝装置对普通高速纺丝机进行技术改造，并一步法生产出充分结晶的ＰＥＴ纤维（ＦＣＹ）。该纤维可直接用于织造，调节热管温度、热管安装位置可获得满足后道工序不同需要的ＦＣＹ。     

����ѡ����ˮ��������ܴ���ѧģʽ���о���Ӧ�á�����̸TI��59����������ѧģʽŵģͼ

��Consulting the relevant documents at home and abroad,the author finisheid the derivation of quations about critical flow quantity,critical flow rate,contrast flow quantity,contrast flow rate which are necessary to the continuous water withdrawal through the flow string with different diameters and the rational flow string formula that should be selected when the contrust parameter1.The author also works out the solving programme for TI-59 computer and designs and draws up the nomograrn of mathematical mode.The evident economical results have been obtained from practice of optimizing the flow string for water withdrawal in gas production in Southern Sichuan and from studying the gas-water two-phase flow characteristics through vertical pipe.