Semi-supervised transformable architecture search for feature distillation

Pattern Analysis and Applications - The designed method aims to perform image classification tasks efficiently and accurately. Different from the traditional CNN-based image classification methods,...     

加强计量信息化建设,提高企业计量管理水平

网络化的计量管理信息系统在技术上的实用性和维护性上面都有其可靠性,对计量管理工作采用信息化管理可以真正实现完全意义上的信息共享,使我们管理的计量装置、计量器具准确可靠的运行。     

Ultrafast measurement of transient electroosmotic flow in microfluidics

We present a non-intrusive molecular dye based method, i.e., laser-induced fluorescence photobleaching anemometer (LIFPA), to significantly increase temporal resolution (TR) for velocity measurement of fast transient electrokinetic flows. To our knowledge, the TR has been for the first time achieved to 5–10 μs, about 100 times better than that published from state-of-the-art micro particle image velocimetry (μPIV), which is currently the most widely used velocimetry in the microfluidics community. The new method provides us with new opportunities to study experimentally the fundamental phenomena of unsteady electrokinetics (EK) and to validate relevant theoretical models. One application of the new method is demonstrated by measuring the rise time of DC electroosmotic flows (EOFs) in a microcapillary of 10 μm in diameter.     

嵌入式系统芯片的软硬件协同仿真环境设计

针对嵌入式系统芯片SoC开发验证阶段的需求,介绍了一种通用的SoC软硬件协同仿真平台。软件仿真由C／C＋＋和汇编语言编写,硬件仿真基于VMM验证方法学所搭建,SoC设计代码由RTL代码编写而成。将SoC设计代码中的ARM由DSM模型替代,通过VCS编译器将软硬件协同起来进行信息交互,实现一种速度快、真实性高、调试方便的...     

Dynamically modulated intensity interrogation scheme using waveguide coupled surface plasmon resonance sensors

An electro-optically modulated intensity interrogation method based on tunable waveguide coupled surface plasmon resonance sensors has been proposed. It has been theoretically and experimentally demonstrated that the proposed scheme can enable sensitive measurement of measurand variations. By modulating the refractive index in the waveguide layer, this interrogation method yields modulated signal whose amplitude is related to measurand's refractive index. This amplitude modulated signal offers a higher signal to noise ratio and eliminates additive noise in the sensor system. A preliminary investigation using saline buffers with different NaCl concentrations shows a resolution of 2.3 × 10^?6 refractive index unit by our approach. Resolution can be controlled by the amplitude of the applied modulation voltage and can be further enhanced by optimizing the device structure or improving the electro-optical (E-O) coefficient of the E-O material. This approach is simple, stable, and promising for low-cost or multi-channel SPR biosensor applications.     

基于事件驱动的动态免疫分簇路由算法*

为了降低应用于突发事件监测的无线传感器网络的能量消耗,设计实现了一种基于事件驱动的动态免疫分簇路由算法。将生物免疫系统的工作机制应用到无线传感器网络事件驱动的动态分簇算法中,事件作为抗原,传感器节点作为抗体,抗体对抗原有记忆保存的功能,使得相似的抗原再次出现时对事件及时响应。相似事件再次发生且传感器节点符合能量要求时,可以直接调用抗体中的记忆,对事件进行快速建簇,节省了簇的建立过程所消耗的大量能量,增加了网络的数据传输量,延长了网络的生命周期。仿真结果表明,生物免疫机制的学习记忆特性可以有效提高事件驱动的动态分簇算法的网络性能。     

Optimal replacement policy for a two-dissimilar-component cold standby system with different repair actions

In this paper, a cold standby repairable system consisting of two dissimilar components and one repairman is studied. When failures occur, the repair of both component 1 and component 2 are not ‘as good as new’. The consecutive operating times of component 1 after repair constitute a decreasing geometric process, while the repair times of component 1 are independent and identically distributed. For component 2, its failure is rectified by minimal repair, and the repair time is negligible. Component 1 has priority in use when both components are good. The replacement policy N is based on the failure number of component 1. Under policy N, we derive the explicit expression of the long-run average cost rate C(N) as well as the average number of repairs of component 2 before the system replaced. The optimal replacement policy N*, which minimises the long-run average cost rate C(N), is obtained theoretically. If the failure rate r(t) of component 2 is increasing, the existence and uniqueness of the optimal policy N* is also proved. Finally, a numerical example is given to validate the developed theoretical model. Some sensitivity analyses are provided to show the influence of some parameters, such as the costs for replacement and repair, and the parameters of the lifetime and repair time distributions of both components, to the optimal replacement policy N* and corresponding average cost rate C(N*).     

数据库推理通道的动态控制

数据库推理问题是数据库安全研究的重要组成部分,主要研究推理通道的检测方法和控制策略。该文提出一种动态控制推理通道的方法。该方法为每个推理通道建立一个标识集合,利用集合中元素和推理通道中对象的关联来控制查询的处理,使用户能灵活地访问数据但又得不到足够的信息来推理。与以前提出的方案不同,该方案保证了数据的最大可用性,同时有效地阻止推理并保持了快速的查询处理能力。