氧泵型催化膜反应器中甲烷氧化偶联反应(Ⅰ)——氧泵型催化膜的制备及其反应性能

本文采用1％Sr/La_2O_3-Ag-YSZ氧泵型催化膜反应器进行了甲烷氧化偶联反应研究。比较了不同制备方法的催化膜的反应性能,结果发现浸涂法(Ag-YSZ管随旋转轴转动涂制)制备的膜性能最佳。研究了操作条件对甲烷氧化偶联反应的影响。研究证明,传递氧与气相氧同时进料是一种较好的反应方式。结果表明,利用该反应器不仅可以简化分离过程,而且还可得到更高的C_2烃选择性。     

无铅压电陶瓷的研究进展

在压电陶瓷领域，无铅压电陶瓷从环保的角度考虑越来越引起人们的注意。本文主要综述了以BNT为基的3类无铅压电陶瓷体系。它们都是很好的无铅压电陶瓷的侯选材料，其中BNBT－6，BNTN－3和BNST－2的机电耦合常数K33分别为0．55，0．43，而且具有较高的频率常数和较小的介电系数，适用于众多高频超声换能检测领域以及压电致动装置等方面，所以作为无铅压电陶瓷它们是很有潜力的。     

氧化还原反应式配平中可能差错的几种情况

本文通过许多实例，指出了氧化还原反应式配平中可能出现的得失电子数不等或电荷数未配平、得失电子关系不对及反应式中酸碱性介质有错误等几种差错，并归纳了在酸碱性水溶液中平衡介质的方法。     

Studies on crystallization behaviors and crystal morphology of polyamide 66/clay nanocomposites

X‐ray diffraction methods, DSC thermal analysis, and polarized light microscopy (PLM) were used to investigate the structural changes of nylon 66/clay nanocomposites. PA 66/clay nanocomposites were prepared by the method of melt intercalation. The results indicate that the addition of the intercalated organo‐montmorillonite (OMMT) can induce generation of the β‐form crystal of PA 66 and substantially affect the arrangement of molecules in the α‐form crystal, although the crystallinity scarcely changes. Also, the DSC results indicate that the addition of OMMT in the PA 66 matrix leads to increases of crystallization temperatures and the full width at half maximum (FWHM) of the exothermic peaks. Moreover, the viscosity factor is the main influence on FWHM of the exothermic peaks of PA 66/clay nanocomposites. The results of nonisothermal crystallization kinetics show that OMMT has the effect of heterogeneous nucleation and leads to the decrease of the size of the spherocrystal. The heterogeneous nucleation effects of OMMTs influence the mechanism of crystallization and the growth mode of PA 66 crystals. PLM photographs verify that the size of spherocrystal is decreased and visually confirm the theory of crystallization kinetics. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 756–763, 2005     

高温高压设备瞬态密封分析的三维力学与传热学模型

以大型加氢反应器的高压法兰密封结构为研究对象，建立了瞬态及稳态密封分析的三维力学与传热学模型，主要解决了螺栓载荷的动态模拟和螺栓孔内空气环层的传热计算问题。利用该模型对加氢反应器的瞬态及稳态密封状况进行了计算。     

Study on Tribological Properties of Polytetrafluoroethylene Drawn Uniaxially at Different Temperature

Summary: Wear behavior correlations with morphology have been established from polytetrafluoroethylene (PTFE) drawn at 200, 327, and 375 °C with draw ratio about 4. The friction coefficient and wear rate for PTFE drawn at 327 °C are lower and the wear rate is lower than that of undrawn PTFE by about 30%. The structures of samples were characterized by scanning electron microscope (SEM), DSC, and wide angle X‐ray diffraction (WAXD). Results indicate that the debris morphologies of samples are different. The differences in the tribological behavior of undrawn and drawn samples were attributed to the improvement of the degree of the crystalline, fibrillation, and orderliness by drawing, especially, for PTFE drawn at 327 °C. The orderliness of molecular arrangement along the drawn direction is also higher for PTFE drawn at 327 °C than those of PTFE drawn at 200 and 375 °C, respectively. Therefore, the intensity of covalent bond along drawn direction is higher. The shear resistance and the deformability of the material are greatly improved and the size of the wear breakage unit decreases, which results in a good tribological property for PTFE drawn at 327 °C.

SEM morphology of fractured surface perpendicular to the draw direction for PTFE drawn at 327 °C.     

膨胀型防火涂料的研究

介绍了膨胀型防火涂料的防火机理、组成、特点以及发展趋势。     

中国石化2004年乙烯生产述评

在对中国石化集团公司2004年乙烯生产运行情况进行简要回顾与分析的基础上,提出2005年工作重点及其具体措施。     

微波介质陶瓷的界面特性及其对介电性能的影响

详细地总结了界面的偏析、扩散和润湿性对微波介电性能的影响机理。并评述了粉末的初始状态、烧结工艺、添加剂(掺杂)和烧结方法等因素对材料界面特性的影响，进而影响到材料介电性能的研究进展。最后指出了在微波介质陶瓷界面研究领域面临的问题及今后的发展方向。     

世玛3%OF防除春麦田禾本科杂草药效试验

田间试验结果表明，用世玛225ml/hm^2 Genapol LRO 600ml/hm^2,40d对野燕麦（Auena fatua）、多花黑麦草（Lolium multiflorum)鲜重效果分别为88.1%、94.0%。对小麦安全，与对照比增产15.3%。