Proximity-Induced Fully Ferromagnetic Order with Eightfold Magnetic Anisotropy in Heavy Transition Metal Oxide CaRuO3

Ferromagnetic materials with a strong spin-orbit coupling (SOC) have attracted much attention in recent years because of their exotic properties and potential applications in energy-efficient spintronics. However, such materials are scarce in nature. Here, a proximity-induced paramagnetic to ferromagnetic transition for the heavy transition metal oxide CaRuO₃ in (001)-(LaMnO₃/CaRuO₃) superlattices is reported. Anomalous Hall effect is observed in the temperature range up to 180 K. Maximal anomalous Hall conductivity and anomalous Hall angle are as large as ∼15 Ω⁻¹ cm⁻¹ and ∼0.93%, respectively, by one to two orders of magnitude larger than those of the typical 3d ferromagnetic oxides such as La_0.67Sr_0.33MnO₃. Density functional theory calculations indicate the existence of avoid band crossings in the electronic band structure of the ferromagnetic CRO layer, which enhances Berry curvature thus strong anomalous Hall effects. Further evidences from polarized neutron reflectometry show that the CaRuO₃ layers are in a fully ferromagnetic state (∼0.8 μ_B/Ru), in sharp contrast to the proximity-induced canted antiferromagnetic state in 5d oxides SrIrO₃ and CaIrO₃ (∼0.1 μ_B/Ir). More than that, the magnetic anisotropy of the (001)-(LaMnO₃/CaRuO₃) superlattices is eightfold symmetric, showing potential applications in the technology of multistate data storage.     

Design techniques for voltage-to-time converters with nonlinearity emphasis

This paper provides an in-depth treatment of voltage-to-time converters (VTCs) for time-based signal processing with a nonlinearity emphasis. The need for VTCs in deployment of time-based techniques for high-speed or high-resolution analog-to-digital converters is investigated. It is followed with the classification of VTCs. A detailed treatment of the principle, topology, operation, and design consideration of variable-slope (VS) and constant-slope (CS) VTCs is provided. The nonlinearity of VS-VTCs and that of CS-VTCs are analyzed in detail analytically. It is shown that VS-VTCs is inherently nonlinear while CS-VTCs is intrinsically linear. Factors contributing to the nonlinearity of these VTCs are investigated. VS-VTCs and CS-VTCs studied are designed in TSMC 130 nm 1.2 V CMOS and analyzed using Spectre from Cadence Design Systems with BSIM3.3 device models. A good agreement between simulation and analytical results is obtained. The average gain of the VS-VTC is 4.4 times that of the CS-VTC. The 2nd and 3rd harmonics of the CS-VTC are significantly smaller as compared with those of the VS-VTC at the price of more power consumption.

     

Editorial: Machine Learning and Intelligent Communications (MLICOM 2018)

Mobile Networks and Applications -     

Analysis of Internet Financial Risks Based on Deep Learning and BP Neural Network

Computational Economics - The study aims to analyze and forecast Internet financial risks based on the model based on deep learning and the Back Propagation Neural Network (BPNN). First, the theory...     

Finite element implementation of a thermo-damage-viscoelastic constitutive model for hydroxyl-terminated polybutadiene composite propellant

A thermo-damage-viscoelastic model for hydroxyl-terminated polybutadiene (HTPB) composite propellant with consideration for the effect of temperature was implemented in ABAQUS. The damage evolution law of the model has the same form as the crack growth equation for viscoelastic materials, and only a single damage variable \(S\) is considered. The HTPB propellant was considered as an isotropic material, and the deviatoric and volumetric strain-stress relations are decoupled and described by the bulk and shear relaxation moduli, respectively. The stress update equations were expressed by the principal stresses \(\sigma_{ii}^{R}\) and the rotation tensor \(M\), the Jacobian matrix in the global coordinate system \(J_{ijkl}\) was obtained according to the fourth-order tensor transformation rules. Two models having complex stress states were used to verify the accuracy of the constitutive model. The test results showed good agreement with the strain responses of characteristic points measured by a contactless optical deformation test system, which illustrates that the thermo-damage-viscoelastic model perform well at describing the mechanical properties of an HTPB propellant.     

Effect of Sintering Temperature on Magnetic and Electrical Properties of GdBaCo<Subscript>2</Subscript><Emphasis Type="Italic">O</Emphasis><Subscript>5 + <Emphasis Type="Italic">δ</Emphasis></Subscript>

In this study, we report the results of an investigation into the sintering temperature dependence of magnetic and transport properties for GdBaCo₂ O _{5 + δ} synthesized through a sol-gel method. The lowering of sintering temperature leads to the increase of oxygen content and the reduction of grain size. The increase of oxygen content results in the enhancement of magnetic interactions and the weakening of Coulomb repulsion effect, while the reduction of grain size improves the magnetoresistance effect. Metal-insulator transition accompanied with spin-state transition is observed in all samples.     

Comparison of gas sensing properties based on hollow and porous α-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> nanotubes

Hollow and porous α-Fe₂O₃ nanotubes were successfully synthesized by single nozzle electrospinning method followed by annealing treatment. The crystal structures and morphologies of the as-prepared materials were characterized by X-ray diffraction and scanning electron microscopy, respectively. The as-prepared materials were applied to construct gas sensor devices which gas sensing properties were further investigated. The obtained results revealed that porous α-Fe₂O₃ nanotube gas sensors exhibit a markedly enhanced gas sensing performance compared with hollow α-Fe₂O₃ nanotube gas sensors, which was about three times higher to 100 ppm acetone at 240 °C. Interestingly, hollow and porous α-Fe₂O₃ nanotube gas sensors both showed fast response–recovery time and good selectivity, but the porous ones possessed the shorter recovery time. The improved properties could be attributed to the unique morphology of porous nanotubes. Thus, further improvement of performance in metal-oxide-semiconductors materials could be realized by preparation the unique porous structures of nanotubes. Moreover, it is expected that porous metal-oxide-semiconductors nanotubes could be further design as promising candidates for gas sensing materials.     

依法治检下提高计量技术档案管理科学化水平的思考

计量技术档案除了可以显示出技术机构运行的情况,方便工作人员及时发现并调整体系运行过程中存在的问题,使所有工作有序进行以外,还为日常检定工作的溯源和改进提供了主要凭证和强大动力。在计量事业发展的同时,档案管理也发扬着其日益重要的作用,怎样管理好计量技术档案是当前依法治检中不可或缺的一项重要工作,该篇文章将围绕计量技术单位该怎样安排有限的人力资源,做好各项档案管理工作,保证在常规工作有条不紊的进行的同时,能科学化妥善保管各种工作档案来谈谈自己的理解。