生长条件对KDP晶体中散射颗粒的影响

利用透射电子显微技术对不同条件下生长的KDP晶体中包裹物进行了观察并测量了其相应尺寸。结果表明，晶体中的生长缺陷、pH值、生长速度和杂质与KDP晶体散射颗粒的形态存在密切关系。     

IP网络传输技术的研究与发展

分析了IP网络传输技术的现状和以太网技术的发展 ,研究了几种新的以太网传输技术 ,提出了以太网技术将覆盖从LAN、MAN乃至WAN ,成为全面构建下一代网络主流技术的新观点。     

灰度图像的子块压缩方法

从灰度图像的局部几何特性出发，把图像中像素灰度相近或相同的区域当作一个整体处理，从而达到图像压缩的目的。计算机仿真实验表明，该方法可以获得产高的压缩比和峰值信噪比，有效地消除方块效应，很好地保持目标细节，具有较高的实用价值。     

Code Compression for VLIW Embedded Systems Using a Self-Generating Table

We propose a new class of methods for VLIW code compression using variable-sized branch blocks with self-generating tables. Code compression traditionally works on fixed-sized blocks with its efficiency limited by their small size. A branch block, a series of instructions between two consecutive possible branch targets, provides larger blocks for code compression. We compare three methods for compressing branch blocks: table-based, Lempel-Ziv-Welch (LZW)-based and selective code compression. Our approaches are fully adaptive and generate the coding table on-the-fly during compression and decompression. When encountering a branch target, the coding table is cleared to ensure correctness. Decompression requires a simple table lookup and updates the coding table when necessary. When decoding sequentially, the table-based method produces 4 bytes per iteration while the LZW-based methods provide 8 bytes peak and 1.82 bytes average decompression bandwidth. Compared to Huffman's 1 byte and variable-to-fixed (V2F)'s 13-bit peak performance, our methods have higher decoding bandwidth and a comparable compression ratio. Parallel decompression could also be applied to our methods, which is more suitable for VLIW architectures.     

Novel Digital Nonvolatile Memory Devices Based on Semiconducting Polymer Thin Films

Recent increases in the demand for mobile devices have stimulated the development of nonvolatile memory devices with high performance. In this Communication, we describe the fabrication of low‐cost, high‐performance, digital nonvolatile memory devices based on semiconducting polymers, poly(o‐anthranilic acid) and poly(o‐anthranilic acid‐co‐aniline). These memory devices have ground‐breaking and novel current–voltage switching characteristics. The devices are switchable in a very low voltage range (which is much less than those of all other devices reported so far) with a very high ON/OFF current ratio (which is on the order of 10⁵). The low critical voltages have the advantage for nonvolatile memory device applications of low operation voltages and hence low power consumption. With this very low power consumption, the devices demonstrate in air ambient to have very stable ON‐ and OFF‐states without any degradation for a very long time (which has been confirmed up to one year so far) and to be repeatedly written, read and erased. Our study proposes that the ON/OFF switching of the devices is mainly governed by a filament mechanism. The high ON/OFF switching ratio and stability of these devices, as well as their repeatable writing, reading and erasing capability with low power consumption, opens up the possibility of the mass production of high performance digital nonvolatile polymer memory devices with low cost. Further, these devices promise to revolutionize microelectronics by providing extremely inexpensive, lightweight, and versatile components that can be printed onto plastics, glasses or metal foils.     

Residual Synchronization Error Elimination in OFDM Baseband Receivers

It is well known that an OFDM receiver is vulnerable to synchronization errors. Despite fine estimations used in the initial acquisition, there are still residual synchronization errors. Though these errors are very small, they severely degrade the bit error rate (BER) performance. In this paper, we propose a residual error elimination scheme for the digital OFDM baseband receiver aiming to improve the overall BER performance. Three improvements on existing schemes are made: a pilot‐aided recursive algorithm for joint estimation of the residual carrier frequency and sampling time offsets; a delay‐based timing error correction technique, which smoothly adjusts the incoming data stream without resampling disturbance; and a decision‐directed channel gain update algorithm based on recursive least‐squares criterion, which offers faster convergence and smaller error than the least‐mean‐squares algorithms. Simulation results show that the proposed scheme works well in the multipath channel, and its performance is close to that of an OFDM system with perfect synchronization parameters.     

高速移动通信系统中OTFS分数多普勒信道估计加窗研究

针对正交时频空间(OTFS)调制系统中分数多普勒信道对应的物理路径信道状态信息估计困难及计算复杂度较高等问题,该文提出一种节省导频资源的脉冲匹配滤波(PRS-PMF)信道估计算法。该算法首先使用数据与导频联合成帧的嵌入式辅助导频方法获得等效信道的估计,然后通过互相关匹配滤波估计出各路径信道状态信息,相比于传统的脉冲导频互相关匹配滤波信道估计算法,能够在降低计算复杂度的同时减少导频资源的占用。在此基础上,对OTFS系统加窗,减少窗口响应主瓣的整数样点数量并降低旁瓣电平,有效改善了等效信道多普勒响应函数的自相关特性,从而降低了其他符号及噪声对估计符号的干扰。     

Silica‐Coated Manganese Oxide Nanoparticles as a Platform for Targeted Magnetic Resonance and Fluorescence Imaging of Cancer Cells

Monodisperse silica‐coated manganese oxide nanoparticles (NPs) with a diameter of ～35 nm are synthesized and are aminated through silanization. The amine‐functionalized core–shell NPs enable the covalent conjugation of a fluorescent dye, Rhodamine B isothiocyanate (RBITC), and folate (FA) onto their surface. The formed Mn₃O₄@SiO₂(RBITC)–FA core–shell nanocomposites are water‐dispersible, stable, and biocompatible when the Mn concentration is below 50 µg mL^?1 as confirmed by a cytotoxicity assay. Relaxivity measurements show that the core–shell NPs have a T₁ relaxivity (r₁) of 0.50 mM ^?1 s^?1 on the 0.5 T scanner and 0.47 mM ^?1 s^?1 on the 3.0 T scanner, suggesting the possibility of using the particles as a T₁ contrast agent. Combined flow cytometry, confocal microscopy, and magnetic resonance imaging studies show that the Mn₃O₄@SiO₂(RBITC)–FA nanocomposites can specifically target cancer cells overexpressing FA receptors (FARs). Findings from this study suggest that the silica‐coated Mn₃O₄ core–shell NPs could be used as a platform for bimodal imaging (both magnetic resonance and fluorescence) in various biological systems.     

Single‐Crystalline Dodecahedral and Octodecahedralα‐Fe2O3 Particles Synthesized by a Fluoride Anion–Assisted Hydrothermal Method

Despite significant advances in iron oxide nanoparticles, it is still a challenge to synthesize regular polyhedral single‐crystalline α‐Fe₂O₃ particles because the surface energies of several low‐index planes are fairly similar. In the work presented here, well‐dispersed and single‐crystalline dodecahedral and octodecahedral α‐Fe₂O₃ particles are synthesized by a facile hydrothermal method with the aid of F^? anions. The crystalline structure of the polyhedral particles is disclosed by various characterization techniques. The dodecahedral particles are of hexagonal bipyramidal shape and enclosed by twelve equivalent (101) planes. The octodecahedral particles are formed by adding six equivalent (111) planes on the two tips of a dodecahedral particle, that is, they are enclosed by twelve (101) planes and six (111) planes. The existence of F^? anions plays a crucial role in the control of polyhedral particle shape. The function of F^? anions in the shape formation of the polyhedral particles is proposed as follows: 1) A high concentration of exposed Fe³⁺ cations induces preferential adsorption of F^? anions on the (100) plane and leads to the slowest growth along the [100] direction. When the concentration of F^? anions is higher than 24 mM , a stable speed ratio of growth along the [001] and [100] directions results in the exposure of (101) planes. 2) With a lower concentration of F^? anions, six symmetrical (111) planes with low concentration of exposed Fe³⁺ cations are present at the tops of a dodecahedral particle to form an octodecahedron. Furthermore, the dodecahedral and octodecahedral α‐Fe₂O₃ particles show much stronger magnetism than the previously reported α‐Fe₂O₃ nanostructures, having coercivities of 4986 Oe and 6512 Oe, respectively. Such high coercivities are attributed to a large local magnetic anisotropy, which might be induced by the polyhedron with equivalent crystallographic planes and/or the presence of F^? anions.     

Design of an Internal Antenna with Near‐Omnidirectional H‐Plane Radiation Pattern over Ultra‐wide Bandwidth

In this paper, an ultra‐wideband internal antenna for use in mobile applications is proposed. The proposed antenna has symmetrical bi‐arm structures printed on the top and bottom of the substrate, and it occupies a compact area of 10 mm × 10 mm × 1 mm. The designed antenna has an impedance bandwidth from 3 GHz to 12 GHz and near omnidirectional radiation patterns over the frequency band of interest. The group delay between two antennas fabricated using the proposed design is less than 0.8 ns, and the maximum gain variation is about 3.16 dB.