用计算机图形处理软件定量分析SEM图像

用图形处理软件PHOTOSHOP对SEM图像进行图像定量分析，对高温合金K23σ析出相的体积分数和M8钢样的夹杂物颗粒尺寸进行了定量测定。结果表明，该方法操作方便，有一定的可行性。     

Influence of electroplating conditions on magnetic properties of Fe-36wt.% Ni alloy film

A Fe-Ni soft magnetic film was prepared in sulphate solution by electroplating. The influences of the molar ratio of n [Fe2+ ]/ n [Ni2+ ], current density, bath temperature, pH and L-ascorbic acid concentration on magnetic properties of Fe-Ni alloy film were investigated. The results show that the saturated flux density(BS) of the film increases initially and decreases after it reaches the specific value with the increase of n [Fe2+ ]/ n [Ni2+ ] molar ratio, current density, bath temperature and pH. However, the relationship between L-ascorbic acid concentration and B S keeps linear. It is observed that the coercive force( Hc) is enhanced with the increase of n [Fe2+ ]/ n [Ni2+ ] molar ratio, current density and pH. By comparison, when the bath temperature increases, Hc always decreases. With the increase of L-ascorbic acid concentration, the coercive force increases initially and then decreases.     

INVESTIGATION ON CRYSTALLIZATION KINETICS OF Pd-Cu-Si GLASS

The crystallization kinetics of Pd-Cu-Si glass was studied by means of diferential scanningcalorimetry-Ⅱ.According to Kissinger peak shift meth(?)d and Arrhenius equation,theapparent activation energy was calculated.The crystallization kinetics follows Johnson-Mehl-Avrami equation with n=3.0 within 0.15相似文献   

φ114mm直缘成型焊管机组的研制

简介了研制的φ１１４ｍｍ直缘成型焊管机组的技术性能和工艺特点。与普通辊式成型机组相比，该机组工艺先进，焊管精度高。     

铝—钢双金属复合轧制层厚比及轧制力的研究

用实验方法研究了铝－钢双金属复合轧制时层厚比的变化规律。给出了双金属复合时轧制力的计算式。     

TENSILE FRACURE IN AN Al-Li ALLOY 8090

ＴＥＮＳＩＬＥＦＲＡＣＵＲＥＩＮＡＮＡｌ－ＬｉＡＬＬＯＹ８０９０￥Ｊｉａｎｇ，Ｄａｍｉｎｇ；Ｗａｎｇ，Ｙｉｎｏｎｇ；Ｈｏｎｇ，Ｂａｎｄｅ；Ｌｅｉ，Ｔｉｎｇｑｕａｎ（ＨａｒｂｉｎＩｎｓｔｉｔｕｔｅｏｆＴｅｃｈｎｏｌｏｇｙ，Ｈａｒｂｉｎ１５００８０）Ｓｕ...     

D550R系列焊条的焊接电参数分析

采用汉诺威焊接质量分析系统对D550R系列堆焊焊条的焊接电参数进行了精确的统计分析.研究结果表明,可以通过Suw,Siw,∑n(Us),∑n(Is),∑(T1),T3 mean,TC mean等判据来评价焊条与电参数直接相关的工艺性能.为科学分析这类焊条的电参数提供了一种全新的方法.     

Cooling strategies for cryogenic machining from a materials viewpoint

This article discusses the cooling strategies for cryogenic machining from a materials viewpoint. It is argued that, because different materials respond to temperature and machining processes differently, different cooling strategies are needed to improve the machinabilities of materials by cryogenic machining. In this work, five workpiece materials such as AISI1010 low-carbon steel, AISI1070 high-carbon steel, AISIE52100 bearing steel, titanium alloy Ti-6Al-4V, and cast aluminum alloy A390 were studied experimentally at various temperatures. Based on the experimental results of the cryogenic properties of the materials and their known machining characteristics, the cooling strategies for cryogenic machining of these materials were analyzed.     

Camouflage texture evaluation using a saliency map

Multimedia Systems - Camouflage effect evaluation and examination is an important procedure in digital camouflage pattern design as it is helpful in improving the objectivity and effectiveness...     

结合阴影抑制的混合高斯模型改进算法

混合高斯模型背景法作为运动目标检测的一种经典方法,已经广泛应用于智能视频监控系统中。但是,传统的混合高斯模型背景法容易将阴影误检测为运动目标的一部分。因此,针对该方法在区分阴影和运动目标方面的不足,提出了一种将混合高斯模型背景法和HSV空间阴影抑制相结合的运动目标检测算法。这种改进算法首先将颜色空间转换到HSV空间,初步提取运动目标,然后再利用阴影的灰度值比背景中的灰度值小,而前景的灰度值比背景中灰度值大的特性,检测出运动目标中的阴影。实验结果表明,这种改进的算法明显提高了检测效果,有效抑制了阴影对运动目标检测的干扰,算法实时性也较好。