Consecutively spin-assembled layered nanoarchitectures of poly(sodium 4-styrene sulfonate) and poly(allylamine hydrochloride)

The recently established spin-coating electrostatic self-assembly (SCESA) technique has been shown to facilitate not only the rapid fabrication of polyelectrolyte multilayer assemblies, but also allow each layer to be easily controlled on a monomolecular scale by minimizing the film thickness across a substrate surface. In this paper, the influence of polyelectrolyte concentration on the amount and thickness of spin-deposited polymer films has been examined for a multilayer system of poly(allyamine hydrochloride) (PAH) and poly(sodium 4-styrenesulfonate) (PSS), when the washing steps employed for removing weakly bound polyelectrolytes on a resultant film on a substrate are excluded from the standard fabrication procedure of the SCESA method. The thickness of the spin-deposited PAH/PSS bilayer increased linearly for the PSS concentrations in the range from 1 to 10 mM with PAH constant at 1 mM, which demonstrates the uniform deposition of each layer material onto the thin film. The thickness of PAH/PSS bilayers increased from 1.43 ± 0.06 to 3.37 ± 0.08 nm as the PSS concentration increased from 1 to 10 mM, while the PAH concentration was kept constant at 1 mM. The multilayer films were found to be stable in a good solvent (H₂O) for at least 30 h, without any noticeable loss of the adsorbed layer component of the polyelectrolyte. This improvement to the SCESA method (exclusion of washing steps) provides a convenient way to create multilayer heterostructures with the thickness of each layer being easily adjusted.     

超高压并联电抗器的结构特点和运行情况综述

综述了国内外超高压并联电抗器的设计制造和运行情况；重点介绍了国内外不同厂家生产的电抗器的结构特点,以及针对并联电抗器的漏磁发热、振动噪音、损耗等问题所采取的特殊结构措施；分析了我国超高压电网中运行的并联电抗器存在的主要问题,提出了高压并联电抗器的运行监督维护建议。     

Preparation of a sensor substrate using functionalized mesoporous silica on a gold film for surface plasmon resonance (SPR) spectroscopy

The use of surface plasmon resonance (SPR) spectroscopy has been applied to a wide variety of fields such as biosensors and surface analysis instruments. In general, a SPR substrate is prepared using self-assembled monolayer (SAM) method of organic molecules as receptor for the target on a layer of gold or silver. However, mesoporous inorganic materials such as SBA-15 have benefits as sensor substrate for SPR. Mesoporous silica has a large surface area which receptor molecule can be attached and has a rigid body which has an excellent stability in the extreme condition compared to organic sensing layer. We prepared an organic modified mesoporous silica and successfully immobilized it on a gold surface, in an attempt to use as a substrate for SPR spectroscopy. For the comparison of sensitivity of prepared substrate, Pt²⁺ detection was selected as a model system. Substrate prepared in this study exhibited the capability of selective sensing for Pt²⁺ ions.     

Preparation of SnO2 whiskers via the decomposition of tin oxalate

A new method for preparing SnO₂ whiskers by the decomposition of SnC₂O₄ is suggested. A Whisker-like morphology of a SnC₂O₄ precipitate was attained via the gradual addition of an oxalic acid solution to a hot SnCl₂ aqueous solution (T > 50^∘C). In comparison, when the solution temperature was either lower than 50^∘C or when ethanol was used as the solvent, the SnC₂O₄ precipitate showed an angular and relatively isotropic morphology. The morphology of the SnC₂O₄ precipitate remained even after its thermal decomposition into SnO₂ at 400^∘C indicating that SnC₂O₄ precipitation is a key step in preparing the whiskers. The formation mechanism of SnO₂ whiskers was explained by the supersaturation during the precipitation of SnC₂O₄.     

民营二级学院数学教学探微

对现阶段我国民营二级学院数学课程的设置进行了介绍,讨论了民营二级学院数学课程的新定位、内涵以及应该予以重视的几个问题.     

山西移动NGN建设探讨

首先着重分析了山西移动本地NGN的需求。阐述了山西移动NGN建设需要考虑的因素．最后就山西移动NGN的网络建设策略提出了具体的建议。     

提高变压器抗短路强度的措施

变压器对抗短路强度的要求是很高的。文中介绍了变压器短路时的电动力的作用情况，结合单位实际情况介绍了提高变压器抗短路能力的措施。     

Preparation and Haemocompatibility of Regular Array Microporous PLGA Films on Stainless Steel Surface

Regular array microporous films from poly （ L-lactic-co-glycolic acid ） （ PLGA ） were prepared on stainless steel substrates utilizing the condensation of water droplets on polymer solutions. The size of the pores and regularity can be controlled by atmospheric humidity and concentration of polymer solution. The microporous films have strong hydrophabicity and good haemocompatibility.     

Effect of Hot Band Annealing on Magnetic Properties in 3% Si Grain‐oriented Electrical Steels

Hot band annealing is known to be a prerequisite for good magnetic properties irrespective of manufacturing methods in grain‐oriented Fe‐3 wt.% Si electrical steels. In this study, the effects of hot band annealing on magnetic properties were investigated in 3% grain‐oriented electrical steels of low soluble AI contents and one‐stage cold rolling. Microstructure and precipitate distribution were compared with hot band annealing conditions. Secondary recrystallization behaviour with hot band annealing condition was also discussed.     

单质铝水解机理研究(Ⅲ)——单质铝水解结晶过程研究

为了了解单质铝在水解过程中产物物相的变化规律,对单质铝水解过程进行了全过程监测,在反应的不同时段取样并对其进行XRD、SEM分析。以XRD分析结果为依据,对单质铝水解结晶过程中产物物相的变化进行了深入研究,彻底弄清了水解产物的生成顺序。以SEM分析为依据,对影响水解产物形貌、粒度及粒度分布的因素进行了研究。分析认为,团聚、二次成核、搅拌等因素对结晶过程中水解产物的形貌、粒度有显著影响。