含氮杂环季铵盐缓蚀剂在CO2-3%NaCl溶液体系中的电化学行为

为控制CO2腐蚀，合成了含氮杂环季铵盐缓蚀剂9912-1，通过电化学实验，研究了该缓蚀剂在CO2-3％NaCl-H2O体系中对碳钢于25℃和90℃下的缓蚀行为。实验结果与挂片失重法测试的结果基本一致。低温下缓蚀效果优于高温下的缓蚀效果。而且该缓蚀剂与硫脲有很好的协同效应。Tafel曲线表明，该缓蚀过程是以控制阴极腐蚀为主，并对其缓蚀机理进行了初步探讨。     

应用均匀设计法研究安息香缩合工艺

利用均匀设计法通过SPSS10.0计算机软件研究了反应条件对安息香缩合的影响。从而获得优化的工艺条件，与正交试验相比，该法试验次数少。工作效率高，并且便于分析各种因素的影响。     

深亚微米集成电路的快速时域仿真技术

随着深亚微米集成电路技术的发展，集成电路的规模越来越大，工作频率越来越高，并正朝着系统集成的方向发展，因而在模拟速度，模拟精度和可模拟的电路规模等各个方面对电路仿真技术提出了新的要求。近年来，各种新的电路仿真方法和仿真系统用相继脱颖百出，并将取代那些传统的，已经无法适应深亚微米技术发展的电路仿真器。     

Minimal communication cost software construction in the Internet environment

This paper investigates the issue of building software in the Internet environment, where local area network (LAN) based systems are interconnected by links with different bandwidth and do not share file systems. The software is modeled as a directed acyclic graph. Each node in the graph represents a logical step in processing the software while the edges describe the order of execution. The problem is to construct the software at a particular LAN with minimum Internet communication cost. An optimal polynomial algorithm, SOFTCON, with time complexity is presented, where and are the number of nodes and edges in the graph describing the software respectively, is the number of LANs in the Internet environment, and is the time complexity of the network flow algorithm on the flow network with nodes and edges transformed from the directed acyclic graph of the software. Received: 6 December 1995 / 1 May 1996     

On solving constrained optimization problems with neural networks:a penalty method approach

Deals with the use of neural networks to solve linear and nonlinear programming problems. The dynamics of these networks are analyzed. In particular, the dynamics of the canonical nonlinear programming circuit are analyzed. The circuit is shown to be a gradient system that seeks to minimize an unconstrained energy function that can be viewed as a penalty method approximation of the original problem. Next, the implementations that correspond to the dynamical canonical nonlinear programming circuit are examined. It is shown that the energy function that the system seeks to minimize is different than that of the canonical circuit, due to the saturation limits of op-amps in the circuit. It is also noted that this difference can cause the circuit to converge to a different state than the dynamical canonical circuit. To remedy this problem, a new circuit implementation is proposed.     

垂直平行束状孔爆破模型试验与分析

垂直平行密集束状孔落矿有底柱崩落法是一种新的采矿方法。通过爆破模型试验，测试爆破应力，观察分析爆破效果，探求最佳布孔形式，选择最优爆破孔网参数。试验结果表明：用平行束状孔取代扇形落矿，改善了爆破效果，简化了采场结构，减少了采切工程量。     

工业产品的艺术造型与技术美学

本文从技术美学的角度，广义的介绍了工业产品艺术造型的基本方法，着重从美学原则和色彩设计两方面论述产品造型设计的手法，以及技术美学在产品造型设计中的基本应用。     

The application of transmission-line modelling to the simulation ofan induction motor drive

The simulation of a complete induction motor drive is presented. The entire network is modelled using the transmission-line modelling (TLM) technique. The network is split into three sections which are solved independently and are joined together by link transmission-line models. Advantages of this approach are the explicit nature of the algorithm which remains unaltered irrespective of the network topology, unconditional stability, and straightforward modelling of switching elements. Results are presented for a complete drive which illustrate the capabilities and flexibility of the simulation technique     

电子型／离子型导电高分子共混物

用苯胺在酸性水溶液中的进行化学氧化聚合合成了能溶于Ｎ－甲基吡咯烷酮的高分子量聚苯胺（ＰＡｎ），并用这种ＰＡｎ与一种高分子固态离子导体－－聚乙二醇聚醚氨酯脲（ＰＥＵＵ）和ＬｉＣｌＯ４的复合物（ＰＥＵＵ－ＬｉＣｌＯ４）进行溶液共混制得了具有电子型／离子型两种导电功能的新型高分子共混物。用差示扫描量热法、动态粘弹仪、应力－应变试验、四探针法和交流阻抗谱对这种高分子共混物进行研究。实验结果表明，上述ＰＡｎ     

析出物对IF钢性能的影响

一种阻性的晶闸管控制制动器被用于阻尼向串联补偿传输供电的热电发电机中的瞬态扭。重点放在开发适用的控制算，并通过多种不同的运行方式验证算法。作为一种制动器最优控制的可能方法，本文研究了离散等级一般化预先控制（ＧＰＣ），讨论了系统上ＧＰＣ执行过程中存在一些问题。用Ｐｒｏｎｇ分析来辩识系统传递函数，此传递函数与控制方案的考虑及强度特性有关。