The miR-106b/NR2F2-AS1/PLEKHO2 Axis Regulates Migration and Invasion of Colorectal Cancer through the MAPK Pathway

Increasing numbers of miRNAs have been observed as oncogenes or tumor suppressors in colorectal cancer (CRC). It was recently reported that hsa-miR-106b-5p (miR-106b) promoted CRC cell migration and invasion. However, there were also studies showing contradictory results. Therefore, in the present study, we further explore the role of miR-106b and its downstream networks in the carcinogenesis of CRC. We observed that the expression of miR-106b is significantly increased in Pan-Cancer and CRC tissues compared with normal tissues from The Cancer Genome Atlas (TCGA) database. Furthermore, we used Transwell, Cell Counting Kit-8, and colony formation assays to clarify that miR-106b promotes the migratory, invasive, and proliferative abilities of CRC cells. For the first time, we systematically screened the target mRNAs and lncRNAs of miR-106b using TCGA database and the bioinformatics algorithms. Dual-luciferase reporter assay confirmed that NR2F2-AS1 and PLEKHO2 are the direct targets of miR-106b. Furthermore, NR2F2-AS1 acts as a competing endogenous RNA (ceRNA) to regulate PLEKHO2 expression by sponging miR-106b. The results of Gene set enrichment analysis (GSEA) and Western blot indicated that they play important roles in CRC progression by regulating MAPK pathway. Thus, miR-106b/NR2F2-AS1/PLEKHO2/MAPK signaling axis may suggest the potential usage in CRC treatment.     

NiTi形状记忆合金螺钉的研制及医学应用

成功地研制了一种新型NiTi形状记忆合金螺钉并已临床应用了150例,经3年多考核,未发现骨不连及股骨头缺血坏死现象。     

添加15％Mo对反应熔渗Al制备MoSi2复合材料组织和力学性能的影响

采用在常规模压生坯中浸渗Al的方法,研究了MoSi2+Mo反应熔渗Al后的显微组织和力学性能的变化情况.研究表明MoSi2坯体在1350℃反应浸渗Al可使抗弯强度高达737 MPa,其断裂韧性也可达到4.3 MPa·m1/2,远远高于热压单相材料;然而其相成分中存在残余的Si相和Al相将会阻碍其高温应用;在MoSi2坯体中加入Mo粉可以消除残余硅相;经过计算,当Mo添加量为15%(质量分数,下同)时,可以完全消除Si相,并使Al相达到最低,而其强度并不降低.同时SEM观察表明,添加15%Mo后其断口显示晶粒间絮状夹层变成颗粒状黑色相面积较未加入Mo粉时减小.从而进一步证实添加15%Mo产生的组织变化将有利于该材料的高温力学性能.     

一种检测电火花加工间隙状态的柔性方法

介绍了一种在数控电火花加工脉冲电源中实现间隙状态检测的柔性方法，具有阈值设置柔性、状态识别准确的特点，巧妙地用一个稳压二极管的钳位作用提高了间隙状态识别的精度，非常适合需经常改变加工参数的加工实验使用。     

锂电极表面膜的组成和阻抗行为

介绍了锂电池中锂电极的表面膜的组成和阻抗行为，并根据其表面膜的阻抗行为提出了电化学模型。     

换热器的技术经济评价

在综合考虑原材料购置、设备磨损、电力消耗等相关因素的基础上,提出了采用总投资费用法,运行成本费用法,年计算费用法,费用现值与费用年值法等4种方法对多种换热器投资方案进行分析,便于对不同选型方案进行经济性分析,以达到技术上可行、经济上合理的目标.     

天津爱普生有限公司油墨废水处理方案及运行情况

天津爱普生有限公司废水治理工程设计水量5t／d，废水浓度高，水质、水量变化大。采用水解酸化-生物接触氧化处理工艺对天津爱普生有限公司废水进行处理，进水CODCr，平均为2500mg／L左右，CODCr去除率≥90％，排水各项指标均符合国家污水综合排放标准GB8978-1996的二级排放要求。     

多孔陶瓷分离膜

多孔陶瓷膜由于其优良的耐高温、耐腐蚀、耐微生物侵蚀等性质，近年来被快速地应用于分离领域。本文介绍其制备方法、性能测定及应用前景。     

EBR胶乳凝胶的控制及其对ABS树脂冲击性能的影响

主要讨论了摩尔质量调节剂，延长后期反应时间，提高后期反应温度，过硫酸钾用量等对乙烯－丁二烯橡胶（EBR）胶乳凝胶的影响；同时讨论了低凝胶条件和高凝胶条件下凝胶对ABS树脂性能的影响。结果表明：低凝胶条件,ABS树脂的冲击性能随凝胶质量分数的增加而增加；高凝胶条件下，则随凝胶质量分的增加而降低，得到了EBR胶乳生产中凝胶的主要控制方法，并通过控制EBR胶乳凝胶来实现对ABS树脂冲击性能的控制。     

Position Unmanned Aerial Vehicles in the Mobile Ad Hoc Network

This paper considers the problem of employing multiple unmanned aerial vehicles (UAVs) to the mobile ad hoc network (MANET) as relay backbone nodes to construct the backbone network, to improve the network connectivity, and to address many issues in the MANET such as linkage, capacity, load balance, and reliability. With considering the dynamic nature of the problem, this study provides several linear location problem models and their extensions to accommodate these issues. Due to the size of linear location models associated with a large number of constraints, the problem becomes computational challenging even with modest size of nodes. To overcome the computational barrier, we recast these location problem models using a quadratic unconstrained binary optimization (QUBO) framework and solve these QUBO models with a Tabu search heuristic with preprocessing. The analysis of the solutions that are produced by QUBO together with the comparisons made with the linear model highlight both the attractiveness and robustness of the proposed approach. The results of this study provide support to future advanced routing protocol development.