高放废液化学成分分析

概述了高放废液中25种阳离子、5种阴离子以及总蒸残物、总氧化物、密度和游离酸的分析方法。对核燃料后处理高放废液进行取样分析,其主要化学成分采用两种以上不同原理的方法作对比测定,结果相互符合情况良好,为高放废液处理处置研究设计,提供了完整、准确的基础数据。     

SA299钢冷脆行为的研究

某锅炉厂生产的锅炉汽包,在冬季制造过程中发生破裂,汽包材料为 SA299钢,对断口的初步分析发现为脆性解理断口,据此认为是冷脆破坏。本文依据冷脆特征温度 Tc 的概念对 SA299钢的冷脆行为进行了细致的分析。     

差分跳频系统对抗初探

以CHESS系统为例,介绍了差分跳频通信系统的基本原理,对其抗常规有意干扰的性能作了简要分析;在此基础上,初步探索了对CHESS系统进行侦察干扰的方法,并在计算机上对干扰效果进行了仿真比较。     

Photocatalytic degradation of 2,2‐bis(4‐hydroxy‐3‐methylphenyl) propane (BPP) based on molecular recognition interaction

BACKGROUND: Endocrine disruptors in the aquatic environment and their potential adverse effects are currently issues of concern. One of these endocrine disruptors is 2,2‐bis(4‐hydroxy‐3‐methylphenyl)propane (BPP). In this work the molecular recognition interaction of BPP with β‐cyclodextrin (β‐CD) was studied using IR spectroscopy and steady state fluorescence spectroscopy, and the photocatalytic degradation behaviour of BPP based on molecular recognition interaction was investigated in a TiO₂/UV–visible (λ_max = 365 nm) system. This might provide a new method for the treatment of some organic pollutants in wastewater. RESULTS: β‐CD reacts with BPP to form a 1:1 inclusion complex, the formation constant of which is 4.94 × 10³ L mol^?1. The photodegradation rate constant of BPP after molecular recognition by β‐CD showed a 1.42‐fold increase in the TiO₂/UV–visible (λ_max = 365 nm) system. The photodegradation of BPP depended on the concentration of β‐CD, the pH value, the gaseous medium and the initial concentration of BPP. The photodegradation efficiency of BPP with molecular recognition was higher than that without molecular recognition. After 100 min of irradiation the mineralisation efficiency of BPP after molecular recognition by β‐CD reached 94.8%, whereas the mineralisation efficiency of BPP before molecular recognition by β‐CD was only 40.6%. CONCLUSION: The photocatalytic degradation of BPP after molecular recognition by β‐CD can be enhanced in the TiO₂/UV‐visible (λ_max = 365 nm) system. This enhancement is dependent on the enhancement of the adsorption of BPP, the moderate inclusion depth of BPP in the β‐CD cavity and the increase in the frontier electron density of BPP after molecular recognition. Copyright © 2008 Society of Chemical Industry     

UCT测井技术在河南油田的应用

介绍了超声波固井质量检测仪(UCT)的原理、结构及测井方法，分析了UCT测井资料的应用情况。实践表明，UCT能准确地探测套管腐蚀，直观评价水泥与套管、水泥与地层一、二界面的胶结质量。     

浅谈现阶段如何推行HSE

根据胜利油田建立实施HSE管理体系工作的现状,提出现阶段推行HSE管理体系要做好五方面的工作。在日常管理工作中,要做到高标准、高质量、严要求、严考核。     

Comment on "Outage Probability Analysis of a MIMO Relay Channel with Orthogonal Space-Time Block Codes"

We point out that a simpler expression could be derived for the outage probability considered by Chalise and Vandendorpe (2008). As a result, the computation of confluent hypergeometric function of two variables is not needed and the required computational effort is significantly reduced.     

用SY87721实现城域网波分复用系统的多业务接入

为了使城域网的DWDM（密集波分复用）系统可以接入多种信号速率和格式，以满足用户的要求，首先介绍了一种波长转换板的设计方法，使用SY87721自适应提取28Mbit／s～2.7Gbit/s之间任意速率信号的时钟，其次介绍了SY87721提取时钟的工作原理、与单片机和CPLD（复杂可编程逻辑器件）的接口方式、对寄存器的配置和读出方式。最后介绍了使用参考时钟测量接入信号频率的方法，这会在系统维护时带来较大的方便。     

Validation and modification of WAVE spray model for diesel combustion simulation

In CFD simulation of diesel combustion, the predictive capabilities of the spray model play the most important role. Consequently, under the strict guidelines of the V&V, a method to adjust parameters of diesel spray model WAVE to accompany with the in-cylinder physical progress has been investigated in this paper. Moreover, the simulation of the spray has been validated by high-speed photography experiments and verified by the equation proposed by Hiroyasu. Finally, a modified setup for the WAVE spray model has been proposed and applied in the spray and combustion simulation for Deutz1013 diesel in different engine speed.     

Green and self-lubricating polyoxymethylene composites filled with low-density polyethylene and rice husk flour

Polyoxymethylene (POM) composites filled with low-density polyethylene (LDPE) and rice husk flour (RHF) were prepared by injection molding. The POM/5 wt % LDPE/7.5 wt % RHF composite exhibited the lowest wear rate, whereas the coefficient of friction remained low, and the POM/5 wt % LDPE/5 wt % RHF composite had the best mechanical properties. X-ray diffraction analysis was carried out, and the worn surfaces were examined with scanning electron microscopy. The results showed that the addition of the filler reduced the crystallinity degree of the POM composites. The main wear mechanism for unfilled POM was adhesion, whereas for the POM composites, wear seemed to occur mainly by fatigue and abrasion. It was experimentally confirmed that the POM composite filled with LDPE and RHF, which is well-performing, low-cost, and environmentally friendly, could be a potential material for tribological applications. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008