Synthesis and characteristics of SiC whiskers with “rosary bead” morphology

SiC whiskers with ″rosary bead″ morphology were synthesized using suitable silicon source and carbon source through solid reaction at the temperature above 1537 K. The diameter and length of the SiC whiskers were about 0.1-1.0 μm and 20-100 μm,respectively. The largest diameter of their enlarged ends of the whiskers was about 0.2-1.0 μm, and it gradually and smoothly decreased to the size of the plain part of the whiskers. The results of X-ray diffraction analysis show that the crystalline structure of the obtained SiC whiskers is β-SiC. It is considered that the SiC whiskers grow via a vapor-solid mechanism.     

行政改革的制度安排及其价值观念的重建

中国改革进入了一个新的重要时期,经济改革所面临的任务已经不可能仅仅在经济领域内解决.中国的改革必须解决旧体制遗留的深层体制矛盾,必须在政治改革与政治文明方面做出创新.社会主义市场经济作为我国政府行政改革的强烈的现实需求和逻辑起点,通过系统性的制度安排来实现行政改革的目标.在这一过程中,政府价值观念必须建立在政府的公共性基础上,提升政府自身能力,继续推进国家的现代化进程.     

表单提交对象化-Struts

在b／s结构中可以完全实现逻辑和界面的分离，而它们之问的数据交流只有一个途径：表单提交。实现表单提交的对象化一直是很多程序员的愿甲，水文将通过对struts的介绍末展示其恭本工作原理，阐述如何用struts实现表单提交对象化：     

Preliminary results of post-irradiation examinations on LiSoR-2 test section

Liquid-solid reaction under irradiation (LiSoR) experiments are aimed at understanding the effects of liquid lead-bismuth eutectic (LBE) corrosion and embrittlement under irradiation on structural materials, which is one of the key items of the materials R&D for the future accelerator-driven system (ADS). The LiSoR setup is basically a LBE loop with a test section irradiated with 72 MeV protons. The second irradiation was conducted for about 34 h and terminated after a leakage of LBE was detected. Post-irradiation examinations (PIE) are being performed on both the tube and tensile specimen in the test section. Optical microscopy, scanning electron microscopy, transmission electron microscopy and microhardness tests have been completed. The results show that a crack formed in the irradiation zone of the tube. In the material in the irradiation zones of both the tube and the tensile specimen dislocation cell structure is well developed, which indicates heavy deformation due to thermal fatigue. The crack should start at the inner surface and propagate to the outer surface. The fracture surfaces of the crack are dominated by a brittle cleavage fracture mode. However, on the surfaces of the tensile specimen, no microcracks are observed.     

4A和13X分子筛去除水中重金属Cd2＋及其吸附性能研究

以4A和13X分子筛为吸附材料,考察废水pH值和Cd2＋初始浓度等对Cd2＋去除率的影响,并研究了分子筛对Cd2＋的吸附性能。结果表明,4A和13X分子筛投加量为0．16 g/L、废水pH值为5、Cd2＋浓度为20 mg/L时,Cd2＋去除率达到95％以上;分子筛对Cd2＋的去除机理以离子交换吸附为主,交换出来的Na＋与分子筛吸附的Cd2＋摩尔浓度比为2;在吸附热力学和动力学方面,4A和13X分子筛均符合Langmuir吸附等温模型和Lagergren二级速率方程,计算的饱和吸附容量 Q0分别为150．15、163．67 mg/g ,二级反应速率常数K2分别为2．45＆#215;10-3、3．96＆#215;10-4 g/（mg ＆#183; s）。该吸附反应是一种单分子层反应速度较快的化学吸附过程。     

基于相关性反馈的自适应热点话题追踪模型

针对在热点话题追踪过程中容易发生话题漂移的问题,提出了基于相关性反馈的自适应热点话题追踪模型。为准确把握话题的动态演变过程,首先,在词频-逆向文档频率(term frequency-inverse document frequency, TF-IDF)的基础上引入了相关度因子。其次,构造了报道与话题的相关度计算公式和新特征词能否反馈加入到话题词汇库的判别函数。同时,利用了话题词汇库本身的特性,构造了自适应更新阈值和自适应相关阈值的动态计算方法。最后,根据各个特征词对该话题贡献度的大小,对更新后的词汇库中的各特征词动态赋予新权重。实验结果显示,和其它3类追踪器相比,该追踪器模型的漏报率平均降低0.018、误报率平均降低0.063,这表明,该追踪模型更适合于解决话题漂移问题。     

运用多维画法几何理论解决线性规划问题

本文用计算机与多维画法几何理论相结合的方法，对地线性规划问题，给出了一种新的解法，文中包括理论述，计算方法，程序设计及计算实例等。     

求解线性时变系统状态方程的一种新方法

本文给出了移位雅可比多项式的乘积运算矩阵,利用该矩阵,将时变系统的状态方程等效变换为一个简单的矩阵代数方程,使其求解大为简化。通过对两个实例的计算,获得了相当令人满意的结果。     

荧光灯频闪对视觉功能影响的实验观察

本研究以视力正常的健康青年人为受试对象,测试使用不同频闪的荧光灯时,视觉疲劳出现的情况。测定结果表明,经８小时实验观察,使用无频闪的直流荧光灯,眼的调节近点、集合近点、闪光融合频率、明视持久度等指标的变化程度,明显小于有频闪的荧光灯,差异有显著性（Ｐ＜０．０５,Ｐ＜０．０１）,提示在同样条件下,无频闪的荧光灯可以减轻视觉疲劳程度。