改性大豆皮吸附剂对Pb2+的生物吸附性能研究

Using soybean hull residue after the soluble dietary fiber being removed during the soybean processing industry as crude material, a novel absorbent modified soybean hulls is prepared. Its adsorption behavior for Pb2+ is studied. The adsorbent has a large and efficient adsorpuon capacity for Pb-, uv to 20% of the mass of dry adsorbent. Its maximum adsorption capacity for Pb2+ reaches 217 mg.g-1 at initial Pb2+ concentration of 2000 mg.L-1,which is twice that of yeast absorbent and threefold greater than that of chitosan absorbent. The adsorption ability is sensitive to pH value in the solution and the optimal pH for adsorption of Pb2+is 7.0. In the presence of other metal ions (Ca2+, Mg2+and Na+) in the solution, their effect on the adsorption capacity for Pb2+is not obvious. After 5 cycles of adsorption, 80% adsorption capacity of Pb2+ is maintained. Compared with various available commercial resins, the modified soybean hulls are a plentiful, inexpensive and effective medium for the capture of dissolved Pb2+ from waste streams.     

DDCMP在电网自动化中的应用

在ＤＤＣＭＰ应用于四川省电网通信实践的基础上，对ＤＤＣＭＰ的工程技术问题进行了评估和分析。     

一种新型节能电动油脂润滑泵的设计

设计了一种新型电动油脂润滑泵的结构组成及工作原理,该泵采用微控制器自动控制润滑油脂定时定量输送至各润滑点,并配以液位开关实现低油位报警,大大减少了电机损耗,节省所需的油脂及电力,具有良好的应用前景.     

烧碱蒸发扩产节能改造

杭州电化集团有限公司烧碱分厂为满足隔膜电解扩产的需要,将蒸发装置三效四体工艺改为三效五体工艺,并改造了循环冷却水系统,从而提高了装置实际产能,并节约了蒸汽。     

A novel de-rusting method with molten salt precleaning and laser cleaning for the recycling of steel parts

Clean Technologies and Environmental Policy - Steel parts are a kind of high recovery value product for which de-rusting is the primary step in the recycling process. Laser cleaning is a popular...     

Truly Concomitant and Independently Expressed Short‐ and Long‐Term Plasticity in a Bi2O2Se‐Based Three‐Terminal Memristor

Concomitance of diverse synaptic plasticity across different timescales produces complex cognitive processes. To achieve comparable cognitive complexity in memristive neuromorphic systems, devices that are capable of emulating short‐term (STP) and long‐term plasticity (LTP) concomitantly are essential. In existing memristors, however, STP and LTP can only be induced selectively because of the inability to be decoupled using different loci and mechanisms. In this work, the first demonstration of truly concomitant STP and LTP is reported in a three‐terminal memristor that uses independent physical phenomena to represent each form of plasticity. The emerging layered material Bi₂O₂Se is used for memristors for the first time, opening up the prospects for ultrathin, high‐speed, and low‐power neuromorphic devices. The concerted action of STP and LTP allows full‐range modulation of the transient synaptic efficacy, from depression to facilitation, by stimulus frequency or intensity, providing a versatile device platform for neuromorphic function implementation. A heuristic recurrent neural circuitry model is developed to simulate the intricate “sleep–wake cycle autoregulation” process, in which the concomitance of STP and LTP is posited as a key factor in enabling this neural homeostasis. This work sheds new light on the development of generic memristor platforms for highly dynamic neuromorphic computing.     

X-PLY超强瓦楞纸板动态缓冲特性的试验研究

基于跌落冲击试验,研究X-PLY(A)、X-PLY(B)两种超强瓦楞纸板的动态缓冲性能,获得了动态缓冲特性曲线的经验公式及其特征系数,为X-PLY超强瓦楞纸板在缓冲包装中的推广应用提供了基本数据.结果表明,X-PLY超强瓦楞纸板的动态缓冲特性曲线呈凹谷状,开口向上,只有一个极小值点,冲击加速度波形近似于半正弦波,具有优良的动态缓冲特性,而且X-PLY(A)超强瓦楞纸板的动态缓冲性能比X-PLY(B)超强瓦楞纸板更好.     

Self-assembly synthesis of cactuslike Cu2O 3D nanoarchitectures via a low-temperature solution approach

Cu₂O nanocactuses were synthesized via a simple, low-temperature, and no time-consuming wet chemical route. The synthesized products were systematically studied by X-ray powder diffraction, scanning electron microscopy, and transmission electron microscopy. The results showed that the formation of Cu₂O nanocactuses was strongly depended on the addition of CTAB and NaOH. The structural evolution of the cactuslike Cu₂O was found to follow dissolution and recrystallization processes. It is noteworthy that the stepwise synthetic procedure was crucial to the growth of the final nanoarchitectures. UV–vis spectrum was also used to estimate the absorption and photodegradation ability of the nanocactuses.     

Modulating lateral strain in GaN-based epitaxial layers by patterning sapphire substrates with aligned carbon nanotube films

A novel carbon nanotube-patterned sapphire substrate (CPSS) has been utilized for the growth of GaN material and fabrication of a InGaN/GaN light emitting diode (LED) by metal-organic vapor phase epitaxy. Different lateral strain distributions and stress reductions were observed in a GaN thin film on CPSS compared with those on a conventional sapphire substrate. Nanoheteroepitaxy induced by small size nucleation islands of about 50 nm is ascribed to this significant strain modulation. The crystalline quality of the GaN thin film was also improved, as illustrated by X-ray diffraction. Performances of 1 mm × 1 mm LEDs on CPSS were also enhanced, with an operational power increase of 37.5% and higher saturation current.