Ionothermal synthesis of a three-dimensional zinc phosphate with DFT topology using unstable deep-eutectic solvent as template-delivery agent

A three-dimensional zinc phosphate compound with DFT topology, designated as ZnPO₄-EU1, has been synthesized by an ionothermal approach from the system HF-ZnO–P₂O₅-choline chloride-imidazolidone. Ethylenediamine, derived from decomposition of the imidazolidone component of the deep-eutectic solvent (DES) itself, is delivered to the synthesis and serves as an appropriate template for ZnPO₄-EU1. Experiments in which the synthesis conditions were varied showed that ZnPO₄-EU1 may be prepared over a wide molar ratio of P/Zn = 0.55–13.0. Powder X-ray diffraction patterns have been obtained at intervals to track the crystallization process of this material. The experimental data show that Zn₃(PO₄)₂ · 4H₂O (a dense phase) was first isolated from the DES after reaction for 1 h. Subsequently, the pure phase of ZnPO₄-EU1 was obtained with increasing crystallization time from 12 h to 72 h. The experimental results show that the nucleation and crystallization take place with relatively low levels of solvent degradation, demonstrating that zinc phosphate with a three-dimensional framework can be synthesized by in situ generation of an appropriate template using an unstable DES at high temperatures (150–200 °C).     

Automating application software generation

Many approaches have been proposed to enhance software productivity and reliability. These approaches typically fall into three categories: the engineering approach, the formal approach and the knowledge-based approach. But the optimal gain in software productivity cannot be obtained if one relies on only one of these approaches. This paper describes the work in knowledge-based software engineering conducted by the authors for the past 10 years. The final goal of the research is to develop a paradigm for software engineering which integrates the three approaches mentioned above. A knowledge-based tool which can support the whole process of software development is provided in this paper.     

太钢不锈冷轧工程防腐蚀施工技术

防腐蚀施工工艺掌握的好坏，直接影响到工程投入生产后的使用寿命，为保证工程质量，以太钢不锈冷轧改造工程冷线防腐为例，对其常发生的质量通病进行认真分析，总结出一套行之有效的施工技术。     

An experiment for showing some kind of artificial understanding

In this paper we design an experiment which can be depicted as a simple scenario, a very limited 'world'. In this world, there are an actor that can pursue a project and an observer that is keeping its eyes on the actor. We try to show in the experiment that the observer can to some degree understand the actor based on its knowledge and some metaphors, i.e. understand what the actor is doing and why. As the conclusion of this experiment, we try to show some features of 'understanding'. These are (1) that 'understanding' has to be based on some preliminary knowledge; (2) that 'understanding' is a process of incremental learning; (3) that, as for symbolic systems, some metaphors are necessary for mapping real entities into concepts in mind.     

催化裂化汽油脱硫助剂TS-01的工业试验

中国石油化工股份有限公司九江分公司在I套催化裂化装置进行了TS—0l催化裂化汽油脱硫双功能助剂的工业应用。结果表明：TS—0l剂对催化裂化汽油有较好的脱硫效果。当TS—0l剂注入原料中的量为70μg／g时，对催化裂化汽油的硫脱除率约为20％；注入量为120μg／g时，硫脱除率可达到25％-30％。汽油中脱除的硫主要以硫化氢形态转移至于气、液化气中。TS—01剂对产品分布及产品其它质量无明显影响，该剂亦有良好的金属钝化效果。     

Commercial Test of Multi-functional Desulfurizing Agent TS-01 for Gasoline in FCC Process

Experimental use of multi-functional desulfurizing agent TS-01 for FCC gasoline in the FCC unit of SINOPEC Jiujiang Company shows that the multi-functional desulfurizing agent can effectively remove various kinds of sulfur in FCC gasoline and diesel fuel and fulfill passivation on heavy metals.     

采用模数转换技术提高脉冲激光测距的测时精度

针对脉冲激光测距中计数量化误差影响测时精度的问题,本文提出了采用模数转换技术提高测时精度的方法,并进行了可行性与精度分析,理论与实践结果均表明,该方法易于实现,能够容易地将计数量化误差减少若干个数量级。     

流动注射分光光度法测定钴

研究了将ＰＡＮ用于流动注射（ＦＩＡ）分光光度法测定微量钴，在５６０ｎｍ处绘制标准曲线，线性范围为０～４５μｇ／ｍｌ，相关系数０．９９６，方法的相对标准偏差（ＲＳＤ）小于３％，加标回收率为９５％～１０５％，进样频率８０次／ｈ。本法简单快速，用于面粉、分子筛，铝合金测定结果令人满意。     

肝癌碘油栓塞后肝区平片所见碘油沉积量与疗效关系

本文分析了90例肝癌肝动脉灌注化疗碘油栓塞后,肝区平片所见碘油沉积量和疗效的关系。碘油沉积分为多,中,少三组,从ATP下降,肿瘤缩小率及一年生存率三方面比较。结果沉积多的与中等组三项都有显著差别;沉积中等的与少的组差别不明显。说明碘油沉积要达到一定的量后,疗效才会显著提高。同时分析了影响碘油沉积的几个因素。     

核测井仪器中的磁屏蔽研究

核测井仪器受套管剩磁的影响比较严重，常常用在探测器的周围缠绕多层坡莫合金带的方法进行磁屏蔽，由于缠绕的坡莫合金圆筒不能闭合，加上缠绕过程中坡莫合金带的形变造成材料本身磁导率的下降，传统的磁屏蔽方法的效果不好。本文介绍一种简单易行、磁屏蔽效果较好的方法，实验的结果说明用电工纯铁做探测器的外壳可以达到令人满意的效果。