高水头混流式水轮机内部固液两相流数值分析

针对泥沙直径对混流式水轮机蜗壳和导水机构内部流场产生影响的问题进行了初步研究,采用固液两相流模型对某电站的高水头混流式水轮机进行了全流道数值模拟,通过单一变量法来研究不同来流泥沙的直径对蜗壳和导水机构内部压力及泥沙分布产生的影响。研究结果表明:与清水相比,含沙水流会不同程度地使蜗壳和导水机构内部的水压力载荷增加,在相同工况下,蜗壳底部、蜗壳鼻端、固定导叶和活动导叶头部的泥沙浓度较大;小直径下泥沙分布均匀,随着泥沙直径的增加,泥沙浓度的梯度变大,泥沙分布更加集中,从而会使磨损加剧。该研究成果可为在含沙水流中运行的水轮机设计提供参考。     

Quantum immune clonal coevolutionary algorithm for dynamic multiobjective optimization

The existing algorithms to solve dynamic multiobjective optimization (DMO) problems generally have difficulties in non-uniformity, local optimality and non-convergence. Based on artificial immune system, quantum evolutionary computing and the strategy of co-evolution, a quantum immune clonal coevolutionary algorithm (QICCA) is proposed to solve DMO problems. The algorithm adopts entire cloning and evolves the theory of quantum to design a quantum updating operation, which improves the searching ability of the algorithm. Moreover, coevolutionary strategy is incorporated in global operation and coevolutionary competitive operation and coevolutionary cooperative operation are designed to improve the uniformity, the diversity and the convergence performance of the solutions. The results on test problems and performance metrics compared with ICADMO and DBM suggest that QICCA has obvious effectiveness and advantages which shows great capability of evolving convergent, diverse and uniformly distributed Pareto fronts.     

等离子喷涂羟基磷灰石涂层

羟基磷灰石由于具有优良的生物性能，被广泛应用于生物材料领域，而等离子喷涂制备羟基磷灰石涂层是应用最为广泛的制备方法之一。在综合国内外献的基础上，本从羟基磷灰石的本征性能、喷涂工艺的影响、结合强度和梯度涂层等方面进行综述。     

水热法制备ZrO_2纳米微晶及对乙醇和丁烷气敏性研究

用水热法制备 Zr O2 纳米微晶的平均尺寸为直径 5 nm,长 7.5 nm。由 X射线衍射确认晶相为单斜相。并对其形状和大小进行了透射电镜和激光散射分析 ,结果表明 Zr O2 纳米粒子在水溶液中存在软团聚 ,团聚体平均尺寸约 90 nm。着重研究了 Zr O2 纳米微晶对乙醇及丁烷的气敏性能 ,结果表明用纳米级 Zr O2 粒子制备的气敏元件对乙醇和丁烷有好的气敏性。并且随着纳米粒子尺寸降低 ,对气体敏感性增强     

聚羟基脂肪酸酯的合成和应用研究进展

介绍了聚羟基脂肪酸酯(PHA)的合成方法，重点讨论了微生物合成法、碳源、化学合成、分离方法及降低PHA生产成本的方法，介绍了PHA的性能及其改性研究，论述了PHA在生物医学、农业、电子、食品包装等领域的应用。     

Studies on grafting of acrylic acid onto polypropylene melt‐blown nonwovens induced by electron‐beam preirradiation

We report the graft copolymerization of acrylic acid onto the polypropylene (PP) melt‐blown nonwovens induced by electron beam (EB) preirradiation in this article. The occurrence of the graft copolymerization was confirmed by means of XPS, FTIR, and SEM. The effects of preirradiation dose, monomer concentration, bath ratio, reaction time, and temperature on the graft ratio were investigated. The water conservation, water absorption rate, and K⁺ exchange capacity were also determined on the grafted PP melt‐blown nonwovens, which showed that EB preirradiation‐induced grafting was an effective way to improve the hydrophicility of PP melt‐blown nonwovens. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4971–4977, 2006     

基于逐次散射法的海洋-大气矢量辐射传输模式

首先推导了粗糙洋面双向偏振反射模型pBRDF(Bidirectional Polarized Reflectance Distribution Function),并将其与SOSVRT(Successive Order of Scattering Radiative Transfer)矢量辐射传输模式耦合,建立了海洋-大气耦合的矢量辐射传输模式,并对该耦合模式的模拟结果与前人模拟结果进行对比,验证了该耦合模式的可靠性与有效性。不同大气和洋面状态、不同高度的主平面内辐射强度和偏振度的模拟结果表明:pBRDF模型可以很好地模拟不同风速下洋面的偏振反射分布特征;洋面在特定角度具有很高的偏振度,并对大气顶的偏振辐射有很大影响。因此,该耦合模式可以更准确地处理辐射光谱在海洋-大气两种介质间的传输问题,对矢量辐射传输、大气遥感问题的研究有重要意义。     

浅谈多媒体教学以信息管理中心为例

高职教育的特点就是以适应社会需要为目标、以培养技术应用能力为主线设计学生的知识、能力、素质结构和培养方案,毕业生应具有基础理论知识适度、技术应用能力强、知识面较宽、素质高等特点.以“应用”为主旨来构建课程和教学内容体系.     

乙烯二聚制高纯丁烯－1技术经济评价

本文对生产高纯度丁烯－１的Ａｌｐｈａｂｎｔｏｌ工艺进行了技术经济评价，认为该工艺条件简单、反应条件温和，而且投资少，所以很适合事在发展中国家应用。     

Effect of structural and electrochemical properties of different Cr-doped contents of Li[Ni1/3Mn1/3Co1/3]O2

Layered Li[Ni_(1−x)/3Mn_(1−x)/3Co_(1−x)/3Cr_x]O₂ materials with x = 0, 0.01, 0.02, 0.03, 0.05 are prepared by a solid-state pyrolysis method. The oxide compounds were calcined with various Cr-doped contents, which result in greater difference in morphological (shape, particle size and specific surface area) and the electrochemical (first charge profile, reversible capacity and rate capability) differences. The Li[Ni_(1−x)/3Mn_(1−x)/3Co_(1−x)/3Cr_x]O₂ powders were characterized by means of X-ray diffraction (XRD), charge/discharge cycling, cyclic voltammetry, and SEM. XRD experiment revealed that the Li[Ni_(1−x)/3Mn_(1−x)/3Co_(1−x)/3Cr_x]O₂ (x = 0, 0.01, 0.02, 0.03, 0.05) were crystallized to well layered -NaFeO₂ structure. The first specific discharge capacity and coulombic efficiency of the electrode of Cr-doped materials were higher than that of pristine material. When x = 0.02, the sample showed the highest first discharge capacity of 241.9 mAh g⁻¹ at a current density of 30 mA g⁻¹ in the voltage range 2.3–4.6 V, and the Cr-doped samples exhibited higher discharge capacity and better cycleability under medium and high current densities at room temperature.