位置灵敏探测器数据采集的软件设计

介绍了一个基于Windows操作系统的数据采集软件，该软件用于使用重心法确定的位置信息的位置灵敏探测器，具有方便的人机交互界面，使用专用驱动程序采集数据。     

主动约束层阻尼板结构动力学建模研究

将有限元法和GHM法相结合，给出了建立主动约束层阻尼（ACLD）板结构动力学模型的新方法。建模时，考虑到粘弹材料（VEM）的纵向位移影响，采用GHM方法描述VEM的本构关系，解决了VEM的力学特性随温度和频率变化的难点，避免因VEM的复杂本构关系而产生的微分积分方程。算例表明本文给出的建模方法是准确的，ACLD结构能够有效控制结构振动。     

Characteristics of aperture coupled microstrip antennas withvarious radiating patches and coupling apertures

A full wave moment method is applied to the analysis of aperture coupled microstrip antennas, in which all components of the electric and equivalent magnetic surface currents are considered. The electric current distributions on the rectangular patch for different coupling aperture positions are presented with their radiation patterns. The effects of the coupling aperture shape and size on the input impedance and radiation performance are also discussed. As an example of new radiators, slotted patches are studied, and it is shown that they can be used to achieve dual-frequency operation     

含氮化合物废气选择性催化氧化技术研究进展

通过对当前含氮化合物废气治理技术的对比分析,总结选择性催化氧化的相关技术优势。根据对含氮化合物的种类及来源分析,介绍氨气、腈类、胺类及其他含氮化合物的催化净化技术。重点总结催化剂的种类、研发进展和在实际使用中可能遇到的问题,同时展望含氮化合物废气选择性催化氧化技术的研发方向。     

Boundary formulations for shape sensitivity of temperature dependent conductivity problems

Used in concert with the Kirchhoff transformation, implicit differentiation of the discretized boundary integral equations governing the conduction of heat in solids with temperature dependent thermal conductivity is shown to generate an accurate and economical approach for computation of shape sensitivities. For problems with specified temperature and heat flux boundary conditions, a linear problem results for both the analysis and sensitivity analysis. In problems with either convection or radiation boundary conditions, a non-linear problem is generated. Several iterative strategies are presented for the solution of the resulting sets of non-linear equations and the computational performances examined in detail. Multi-zone analysis and zone condensation strategies are demonstrated to provide substantive computational economies in this process for models with either localized non-iinear boundary conditions or regions of geometric insensitivity to design variables. A series of non-linear example problems is presented that have closed form solutions. Exact anaytical expressions tor the shape sensitivities associated with these problems are developed and these are compared with the sensitivities computed using the boundary element formulation.     

Quantitative NMR spectroscopy by matrix pencil methods

The matrix pencil (MP) method, based on the singular value decomposition (SVD), is applied to quantitative NMR spectroscopy. Its relationship to other SVD-based methods is also presented. Simulations and applications are given to demonstrate the capability of superior performance.©1993 John Wiley & Sons Inc     

V型尾门在河工模型试验中的应用

尾门是河工模型中常见的装置,也是水位控制的关键设备之一.该文作者根据多年的经验,研制了一种新式尾门--V型尾门.该尾门具有调节精度高、稳定性好、操作方便等优点.并在多个模型中应用,取得了良好的控制效果.文章介绍了V型尾门的制作要点,并结合试验数据论述具体应用效果.     

OFDM技术及其应用

首先对OFDM的发展以及应用做了简要的介绍,然后讨论了当前OFDM研究过程中的两个关键技术问题,最后展望了OFDM的未来发展。     

先进的现场供气设备--TCN640制氮机

对安装于深圳赛意法微电子有限公司的TCN640制氮机进行了简介。该设备由Air Liquide Japan Ltd．(日本液空公司)总体设计、制造，国内技术人员消化改进工艺，具有设备配置先进，安装简单，安全高效，能耗低等优点，其产品氮气的纯度已超过了高纯氮的技术指标。     

非平衡等离子体协同作用光催化剂催化降解苯

采用非平衡等离子体与光催化剂相结合,对苯的降解进行了实验研究。考察了以不同吸附能力的玻璃球和γ-Al2O3为载体对苯降解率、碳平衡、CO2选择性、NOx及O3生成量的影响;研究了以γ-Al2O3为载体时,水蒸气含量对苯的降解率、碳平衡、CO2选择性、NOx及O3生成量的影响。实验结果表明,以具有吸附性的γ-Al2O3为载体可提高苯的降解率;当能量密度为618J/L时,苯的降解率可达98%;同时可降低O3的生成量,但NOx生成量增加;以γ-Al2O3为载体时,随水蒸气含量的增加,苯的降解率降低,特别是在低能量密度时,水蒸气对苯降解率的影响更为显著,但水蒸气的加入可抑制O3的生成,同时可提高碳平衡值。