提高双零铝箔成品率和一级品率的方法

从铝箔毛料，轧制油，轧辊磨削质量，生产工艺控制等方面分析了影响双零中箔成品率和一级品率的因素，提出了提高双零铝箔成品率和一级品率的工艺措施。     

负热膨胀材料立方ZrMo2O8的制备研究

以ZrO(NO3)2和N6H24Mo7O24·4H2O等为原料,采用湿化学法制备出立方相ZrMo2O8粉体.对前驱体在室温～800℃进行了TG-DSC测试,采用XRD、SEM对立方相ZrMo2O8粉体进行了分析观测.结果表明亚稳相立方ZrMo2O8的制备对热处理工艺十分敏感,采用湿化学法在450℃制各出单一立方相ZrMo2O8粉体,在室温～400℃热膨胀系数为-4.337×10-6K-1.     

ADSORPTION MECHANISMS OF HS-IONS ON SULPHIDE MINERAL SURFACES RELATED TO Na_2S-INDUCED FLOTATION

The adsorption mechanisms of HS~- ions existing in air-saturated alkaline solutions on sulphide minerals (including pyrite, arsenopyrite, chalcopyrite and galena) were investigated. The measurement of adsorption density, solvent extraction-chemical analysis of neutral sulphur at the surfaces, measurements of pulp potential and voltammogram, and flotation tests were done. Both the electrochemical and non-electrochemi cal adsorption models of HS~- ions were established. The former was observed and resulted in the formation of neutral sulphur (S°)when the pyrite and arsenopyrite were chosen, and hence renders the surfaces hy drophobic and induced the two minerals flotation. It is called Na_2S-induced flotation. On the other hand, the latter took place and did not produce S° when the chalcopyrite and galena were selected, and hence de presses the collectorless flotation of the two minerals. The adsorptions of HS~- ions were mainly influenced by potentials, pH and the electron structures of the mineral surfaces.     

单道自动对接焊应变应力场分析

通过给出模拟单道自动对接焊过程的数学模型，用有元法计算瞬时应变场和应力场并与实测值进行比较，结果证实计算值与实测值基本吻合，表明用数学模拟自动对接焊过程是可行的。     

径向磁轴承柱槽比优化分析

本文建立了以径向磁轴承最大载承力Fmax为目标，在临界温升τ等多约束条件下，对定子柱槽比k的优化模型，设计变量选取轴承静态气隙s0和定子柱槽比k，采用模糊优化算法，计算结果表明，在其它参数不变的条件下，轴承静态气隙s0和定子柱槽比k在一定的取值范围内，对最大承载力Fmax有规律性影响，达当减小轴承静态气隙s0和增大定子柱槽比k都能显著提高轴承最大承载能力Fmax，结合试验结果对灵敏度进行了分析，并给出了相应结合。     

虚拟CIMS系统在企业中的应用

本文提出一个新概念-虚拟CIMS系统，并介绍了建立虚拟CIMS系统的方法和思路。     

Synthesis and characterization of mechanical-alloyed Ti–xMg alloys

The synthesis and characterization of Ti–xMg (x=4, 9, 12, 15, 21, 24 at%) alloys using mechanical alloying was investigated. A nanometer-sized Ti–24Mg alloy was produced. During mechanical alloying, the height of the XRD peaks of the Mg in the Ti–9Mg alloy decreased, and then disappeared, whereas the Ti XRD peaks broadened, and the grain size decreased with increasing milling time. The Mg firstly dissolved in the grain boundaries of the Ti, and then diffused into the Ti grain interiors. The grain boundaries played an important role in enhancing the solid solubility of Mg in Ti. With increasing Mg content the volume fraction of grain boundaries increased, and a decrease in grain size occurred after mechanical alloying for 48 h.     

低压铸造凝固模拟中时间步长的实用算法

针对低压铸造凝固模拟计算过程中存在的收敛性问题，提出了一种能够处理复杂边界条件的简单算法，准确地给出了临界时间步长，避免了计算发散的现象，同时减少了计算的工作量。     

装备维修技术的发展及表面工程技术的应用

在研究未来维修技术发展特点及趋势的基础上，提出装备维修技术的发展方向和重点是装备状态监测、故障诊断与预测技术，装备修复关键技术，装备维修保障综合化信息化关键技术，装备延寿与再制造技术，装备维修技术创新性研究以及装备现场抢修技术。指出纳米颗粒复合电刷镀技术、高速电弧喷涂技术、纳米固体润滑干膜技术、纳米减摩与原位动态自修复技术等先进而实用的表面工程新技术、新材料、新设备、新工艺，对实现装备维修的快速化、自动化、智能化、信息化将发挥重要作用。     

玻璃包覆纯铜微丝的制备与表征

采用熔融纺丝法制备了玻璃包覆纯铜微丝,对微丝进行了组织观察以及尺寸和缺陷表征,提出了不同冷却条件下的纯铜芯丝凝固过程模型,讨论了制备过程中存在的问题并提出了相应的解决方案.结果表明:在空气中自然冷却凝固的纯铜芯丝内部组织为细等轴晶,加冷却水快速冷却凝固制备的纯铜芯丝内部的晶粒沿着微丝长度方向呈竹节状整齐排列;当微丝外径为45μm、芯丝直径为25 μm时,外径尺寸波动在6%以内,芯丝直径误差小于4%;当原料质量存在问题或制备过程中拉丝速度、冷却速度等工艺参数匹配不合理时,易导致芯丝表面存在凹坑和凹槽等缺陷.