ESD phenomena in GMR heads in the manufacturing process of HDD and GMR heads

It is well known that giant magnetoresistive (GMR) heads used for hard disk drives (HDD) are very sensitive to electrostatic discharge (ESD). In this paper, we describe a method of categorizing ESD damage modes from a standpoint of magnetic influences on the heads as observed by quasi-static test (QST) characteristics as well as electromagnetic characteristics like off-track profiles. In addition, we report an example of GMR stack interlayer diffusion which is one type of hard ESD damage. We also present an example of ESD damage that happened in an actual production process and its preventive measures as guidelines.     

Plan for first phase of safety demonstration tests of the High Temperature Engineering Test Reactor (HTTR)

Safety demonstration tests using the High Temperature Engineering Test Reactor (HTTR) will be conducted for the purpose of demonstrating inherent safety features of High Temperature Gas-cooled Reactors (HTGRs) as well as providing the core and plant transient data for validation of HTGR safety analysis codes. The first phase safety demonstration test items include the reactivity insertion test and the coolant flow reduction test. In the reactivity insertion test, which is the control rod withdrawal test, one pair out of 16 pairs of control rods is withdrawn, simulating a reactivity insertion event. The coolant flow reduction test consists of the partial loss of coolant flow test and the gas circulators trip test. In the partial loss of coolant flow test, primary coolant flow rate is slightly reduced by control system. In the gas circulators trip test one and two out of three gas circulators are run down, simulating coolant flow reduction events. The gas circulators trip tests, in which position of control rods are kept unchanged, are simulation tests of anticipated transients without scram (ATWS).     

An Antisense Oligonucleotide against a Splicing Enhancer Sequence within Exon 1 of the MSTN Gene Inhibits Pre-mRNA Maturation to Act as a Novel Myostatin Inhibitor

Antisense oligonucleotides (ASOs) are agents that modulate gene function. ASO-mediated out-of-frame exon skipping has been employed to suppress gene function. Myostatin, encoded by the MSTN gene, is a potent negative regulator of skeletal muscle growth. ASOs that induce skipping of out-of-frame exon 2 of the MSTN gene have been studied for their use in increasing muscle mass. However, no ASOs are currently available for clinical use. We hypothesized that ASOs against the splicing enhancer sequence within exon 1 of the MSTN gene would inhibit maturation of pre-mRNA, thereby suppressing gene function. To explore this hypothesis, ASOs against sequences of exon 1 of the MSTN gene were screened for their ability to reduce mature MSTN mRNA levels. One screened ASO, named KMM001, decreased MSTN mRNA levels in a dose-dependent manner and reciprocally increased MSTN pre-mRNA levels. Accordingly, KMM001 decreased myostatin protein levels. KMM001 inhibited SMAD-mediated myostatin signaling in rhabdomyosarcoma cells. Remarkably, it did not decrease GDF11 mRNA levels, indicating myostatin-specific inhibition. As expected, KMM001 enhanced the proliferation of human myoblasts. We conclude that KMM001 is a novel myostatin inhibitor that inhibits pre-mRNA maturation. KMM001 has great promise for clinical applications and should be examined for its ability to treat various muscle-wasting conditions.     

High-rate Decoupled Water Electrolysis System Integrated with α-MoO3 as a Redox Mediator with Fast Anhydrous Proton Kinetics

Hydrogen is a promising alternative to fossil fuels that can reduce greenhouse gas emissions. Decoupled water electrolysis system using a reversible proton storage redox mediator, where the oxygen evolution reaction and hydrogen evolution reaction are separated in time and space, is an effective approach to producing hydrogen gas with high purity, high flexibility, and low cost. To realize fast hydrogen production in such a system, a redox mediator capable of releasing protons rapidly is required. Herein, α-MoO₃, with an ultrafast proton transfer property that can be explained by a dense hydrogen bond network in the lattice oxygen arrays of HxMoO₃, is examined as a high-rate redox mediator for fast hydrogen production in acidic electrolytes. The α-MoO₃ redox mediator shows both a large capacity of 204 mAh g⁻¹ and fast hydrogen production at a current rate of 10 A cm⁻²(≈153 A g⁻¹), outperforming most of the previously reported solid-state redox mediators.     

Stability and accuracy of power‐series method for one‐dimensional heat conduction with non‐uniform grid systems

The power‐series method, a finite analytic approach to heat transfer and fluid flow problems that is based on power‐series expansion, was applied to a one‐dimensional heat‐conduction problem to evaluate its stability and accuracy. Application to a specific heat‐conduction problem with non‐uniform grid systems showed that it had stability within the ranges 10⁻⁵<Δt,Δx_E, and Δx_W,a<10⁵, and 10⁻⁵<β<10⁵. Comparison of its solutions with those by the fully implicit and Stefanovic–Stephan methods showed that this method yielded more accurate and robust solutions. © 2005 Wiley Periodicals, Inc. Heat Trans Asian Res, 34(7): 470–480, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20085     

Teleoperation via computer network

In a teleoperation system, providing force information to a human operator can improve task performance. When a communication block between a master and a slave has a transmission delay, the system is easily destabilized. Anderson and Spong guaranteed passivity in the communication block by using scattering transformation and overcame this instability caused by the time delay. But this method can be applied to the communication block with a constant time delay. In a traditional teleoperation system, its communication block has a constant time delay. But time delay irregularly changes in a computer network because many users share telecommunication lines. This paper shows that the variable time delay destabilizes bilateral master-slave manipulator with scattering transformation and a new compensation method which keeps the time delay constant. This new compensation method has been implemented in a single-axis master-slave manipulator.     

40 Gbit/s packet bit error ratio and loss real-time measurement for ultrahigh-speed packet switched network

A novel packet bit error rate (BER) and loss measurement method and system is proposed. A proposed 40 Gbit/s packet BER and loss measurement system is expressed in detail. A 40 Gbit/s BER and loss measurement with various conditions is demonstrated experimentally. In real time, only the payload part of a packet and burst stream with fluctuated guard time is evaluated. The BER and packet loss of a randomly received packet sequence due to routing and buffering can be also evaluated by the measurement system. A 10 Gbit/s packet BER and loss measurement with optical label switching, buffering, and preamble-free optical packet 3R are demonstrated experimentally.     

Nanoimprinting using release-agent-coated resins

A fluorinated self-assembled monolayer (F-SAM) is mainly used as the antisticking layer. To prevent the F-SAM coated on the nanoimprint lithography (NIL) mold from deteriorating, we propose a new form of nanoimprinting using a release-agent-coated resin. The results from measuring the surface free energy and observations by scanning probe microscopy (SPM) confirmed that the surface free energy, frictional force, and adhesion force of the release-agent spray-coated polymethylmethacrylate (PMMA) were lower than those of PMMA. To prove the release-agent spray-coated PMMA had a releasing effect, we tried to undertake thermal nanoimprinting on it using a mold without F-SAM. The pattern was clearly imprinted on the resin without any signs of adhesion.     

Phase and magnetic properties of iron oxide clusters in 20CaO·20SiO2·7Fe2O3·6FeO glasses

The annealing of 20CaO·20SiO₂·7Fe₂O₃·6FeO glasses at 973K in vacuo produced clusters of iron oxide, the shape of which was nearly spherical and the diameter distributed in the narrow range 25–115Å. The phase of clusters was identified to be Fe³⁺(Fe³⁺ _{poststagger|1.30}Fe²⁺ _{poststagger|0.55}V_0.15)·O₄ in the inverse spinel structure based upon the Mössbauer spectra and x-ray diffraction profiles. The clusters exhibited superparamagnetism and their effective anisotropy energy constant was inversely proportional to the cluster diameter. The magnetization of the glasses measured by a vibrating sample magnetometer was 7.2 × 10^-6 Wbmkg^-1 at 10 kOe at room temperature and smaller than the value calculated assuming that the whole clusters have superparamagnetism. These results suggest the pinning of spins near the cluster surface.     

Transport-Coefficient Dependence of Current-Induced Cooling Effect in a Two-Dimensional Electron Gas

The dependence of the current-induced cooling effect on the electron mobility??? _e is explored for a two-dimensional electron gas (2DEG) subjected to a perpendicular magnetic field. We calculate the distributions of the electrochemical potentials and the temperatures under a magnetic field, fully taking account of thermoelectric and thermomagnetic phenomena. Whereas the electrochemical potential and the electric current remain qualitatively unchanged, the temperature distribution exhibits drastic mobility dependence. The lower-mobility system has cold and hot areas at opposite corners, which results from the heat current brought about by the Ettingshausen effect in the vicinity of the adiabatic boundaries. The cooling effect is intensified by an increase in??? _e. Intriguingly, the cold and hot areas change places with each other as the mobility??? _e is further increased. This is because the heating current on the adiabatic edges due to the Righi?CLeduc effect exceeds that due to the Ettingshausen effect in the opposite direction.