Multi-objective topology optimization of multi-component continuum structures via a Kriging-interpolated level set approach

This paper explores a framework for topology optimization of multi-component sheet metal structures, such as those often used in the automotive industry. The primary reason for having multiple components in a structure is to reduce the manufacturing cost, which can become prohibitively expensive otherwise. Having a multi-component structure necessitates re-joining, which often comes at sacrifices in the assembly cost, weight and structural performance. The problem of designing a multi-component structure is thus posed in a multi-objective framework. Approaches to solve the problem may be classified into single and two stage approaches. Two-stage approaches start by focusing solely on structural performance in order to obtain optimal monolithic (single piece) designs, and then the decomposition into multiple components is considered without changing the base topology (identical to the monolithic design). Single-stage approaches simultaneously attempt to optimize both the base topology and its decomposition. Decomposition is an inherently discrete problem, and as such, non-gradient methods are needed for single-stage and second stage of two-stage approaches. This paper adopts an implicit formulation (level-sets) of the design variables, which significantly reduces the number of design variables needed in either single or two stage approaches. The number of design variables in the formulation is independent from the meshing size, which enables application of non-gradient methods to realistic designs. Test results of a short cantilever and an L-shaped bracket studies show reasonable success of both single and two stage approaches, with each approach having different merits.     

Note: detection of micro-cracks in the interlayer dielectric film by the stress based light scattering method

A phenomenon was discovered wherein light scattering strength from cracks increases when tensile stress is applied to micro-cracks produced in the interlayer dielectric film by chemical mechanical polishing treatment. It is likely that the change in light scattering intensity occurs because a region of high stress concentration (region with high variation in index of refraction) is produced near the crack tip due to stress, thus forming a type of scatterer. With this method, it is possible to detect only scatterers which respond to stress, and thus, it is possible to classify and separately detect cracks and particles.     

Polytetrafluoroethylene processing characteristics using high-energy X-ray

Polytetrafluoroethylene (PTFE) microstructures’ processing characteristics using X-ray photo dcomposition and desorption are studied in the highest energy region (2 keV to >12 keV). While the exposed surface states are seen melting and boiling from the remaining bubble structure of the irradiated surface, basic photochemistry of PTFE is also same as previous reports and high-aspect ratio structures are successfully formed. We developed new Ni stencil electroformed stencil masks and successfully fabricated first and practical example of PTFE micro fluidic parts. The characteristics of fabricated micro fluidic parts, a PTFE fluid filter for vertical fluid flow operation which works as passive valve, agreed with the calculated results. This suggests that the accuracy of patterning is adequate to apply this technique to fabricate microfluidic parts and other various microparts.     

High-rate Decoupled Water Electrolysis System Integrated with α-MoO3 as a Redox Mediator with Fast Anhydrous Proton Kinetics

Hydrogen is a promising alternative to fossil fuels that can reduce greenhouse gas emissions. Decoupled water electrolysis system using a reversible proton storage redox mediator, where the oxygen evolution reaction and hydrogen evolution reaction are separated in time and space, is an effective approach to producing hydrogen gas with high purity, high flexibility, and low cost. To realize fast hydrogen production in such a system, a redox mediator capable of releasing protons rapidly is required. Herein, α-MoO₃, with an ultrafast proton transfer property that can be explained by a dense hydrogen bond network in the lattice oxygen arrays of HxMoO₃, is examined as a high-rate redox mediator for fast hydrogen production in acidic electrolytes. The α-MoO₃ redox mediator shows both a large capacity of 204 mAh g⁻¹ and fast hydrogen production at a current rate of 10 A cm⁻²(≈153 A g⁻¹), outperforming most of the previously reported solid-state redox mediators.     

Factors associated with serum magnesium and vascular stiffness in maintenance hemodialysis patients

Introduction : We evaluated the associated factors of serum magnesium in patients on maintenance hemodialysis (MHD). Furthermore, we evaluated the relationship between low serum magnesium and arteriosclerosis in these patients. Methods : In 129 patients on MHD, we evaluated the blood levels of magnesium, brachial‐ankle pulse wave velocity (ba‐PWV), ankle‐brachial index (ABI), and intima‐media thickness of the common carotid artery (IMT). Findings : In MHD patients, the serum level of magnesium was significantly correlated with age, calcium, TNF‐α, albumin, and ba‐PWV but not with ABI or IMT. In the multiple regression analysis, albumin (P = 0.0001, β = 0.31) and calcium (P = 0.029, β = 0.18) were selected as significant predictors of the magnesium level in MHD patients. Furthermore, the serum level of magnesium, as well as systolic blood pressure (P = 0.0001, β = 0.32) and age (P = 0.005, β = 0.25), were selected as significant (P = 0.012, β = ?0.22) predictors of ba‐PWV in MHD patients. Discussion : In MHD patients, the serum magnesium level was associated with the serum levels of calcium and albumin. Furthermore, a low serum magnesium level in MHD patients was associated with the index of vascular stiffness.     

Soft magnetic properties of NiFeTa thin films for biasing film applications in magnetoresistive elements

The effects of Ta addition on the magnetic properties of permalloy thin films have been investigated. The alloy compositions on a weight basis are (Ni₈₁Fe₁₉)_1-x Ta _x with 0 x 0.105, and the films are sputtered onto a glass substrate at between room temperature and 300 C. The saturation magnetization and anisotropic magnetic field decrease with increasing Ta content. The saturation magnetization is 0.75 T at 5 wt % Ta. The coercivity remains constant at 125 Am^-1. The electrical resistivity increases linearly with increasing Ta content, then saturates at approximately 7.5 wt% Ta. The saturation resistivity is approximately 1.00 m. The magnetoresistivity ratio (/) decreases with increasing Ta content, mainly due to increased electrical resistivity (). The magnetostriction changes from negative to positive with increasing Ta content and reaches nearly zero at 2 wt% Ta. The NiFeTa films containing 5–6 wt% Ta have potential for use as the soft-biasing film in magnetoresistive elements.     

Use of solid-electrolyte Galvanic cells to determine the activity of CaO in the CaO-ZrO2 system and the standard Gibbs free energies of formation of CaZrO3 from CaO and ZrO2

The activity of CaO in the CaO-ZrO₂ system has been measured at 1572 to 1877 K with a Galvanic cell composed of 4CaO ? P₂O₅ as the solid electrolyte. The activity ZrO₂ was calculated from the activity of CaO by integrating the Gibbs-Duhem relation. From the activities of CaO and ZrO₂, the standard Gibbs free energy of formation of CaO ? ZrO₂ was determined as follows: ΔG _f ⁰ /J mol^?1 = -25,200 (±150) - 17.58 (±0.085)T (1633 to 1873 K)     

Local normalized linear summation kernel for fast and robust recognition

Kernel-based methods are effective for object detection and recognition. However, the computational cost when using kernel functions is high, except when using linear kernels. To realize fast and robust recognition, we apply normalized linear kernels to local regions of a recognition target, and the kernel outputs are integrated by summation. This kernel is referred to as a local normalized linear summation kernel. Here, we show that kernel-based methods that employ local normalized linear summation kernels can be computed by a linear kernel of local normalized features. Thus, the computational cost of the kernel is nearly the same as that of a linear kernel and much lower than that of radial basis function (RBF) and polynomial kernels. The effectiveness of the proposed method is evaluated in face detection and recognition problems, and we confirm that our kernel provides higher accuracy with lower computational cost than RBF and polynomial kernels. In addition, our kernel is also robust to partial occlusion and shadows on faces since it is based on the summation of local kernels.     

Parametric polynomial spectral factorization using the sum of roots and its application to a control design problem

This paper presents an algebraic approach to polynomial spectral factorization, an important mathematical tool in signal processing and control. The approach exploits an intriguing relationship between the theory of Gröbner bases and polynomial spectral factorization which can be observed through the sum of roots, and allows us to perform polynomial spectral factorization in the presence of real parameters. It is discussed that parametric polynomial spectral factorization enables us to express quantities such as the optimal cost in terms of parameters and the sum of roots. Furthermore an optimization method over parameters is suggested that makes use of the results from parametric polynomial spectral factorization and also employs two quantifier elimination techniques. This proposed approach is demonstrated in a numerical example of a particular control problem.     

Pose-Invariant Facial Expression Recognition Using Variable-Intensity Templates

In this paper, we propose a method for pose-invariant facial expression recognition from monocular video sequences. The advantage of our method is that, unlike existing methods, our method uses a simple model, called the variable-intensity template, for describing different facial expressions. This makes it possible to prepare a model for each person with very little time and effort. Variable-intensity templates describe how the intensities of multiple points, defined in the vicinity of facial parts, vary with different facial expressions. By using this model in the framework of a particle filter, our method is capable of estimating facial poses and expressions simultaneously. Experiments demonstrate the effectiveness of our method. A recognition rate of over 90% is achieved for all facial orientations, horizontal, vertical, and in-plane, in the range of ±40 degrees, ±20 degrees, and ±40 degrees from the frontal view, respectively. Electronic Supplementary Material  The online version of this article () contains supplementary material, which is available to authorized users.