Optimal Track Access Rights Allocation for Agent Negotiation in an Open Railway Market

In open railway access markets, a train service provider (TSP) negotiates with an infrastructure provider (IP) for track access rights. This negotiation has been modeled by a multiagent system in which the IP and the TSP are represented by separate software agents. One of the tasks of the IP agent is to generate feasible (and preferably optimal) track access rights, subject to the constraints submitted by the TSP agent. This paper formulates an IP-TSP transaction and proposes a branch-and-bound algorithm for the IP agent to identify the optimal track access rights. Empirical simulation results show that the model is able to emulate rational agent behaviors. The simulation results also show good consistency between the timetables that were attained from the proposed methods and those that were derived by the scheduling principles adopted in practice.     

Free electron laser ablation of urinary calculi: an experimentalstudy

Infrared laser ablation of urinary calculi was investigated as a function of wavelength to determine the relation of ablation threshold fluences, ablation depths, and optical absorption. A simple photothermal ablation model was employed to examine this relationship. Human urinary calculi composed of >95% uric acid, >95% cystine, >95% calcium oxalate monohydrate (COM), and >90% magnesium ammonium phosphate hexahydrate (MAPH) were used. Various wavelengths between 2.1 and 6.5 μm were selected to perform threshold fluence and ablation depth measurements. The laser source for this study was the tunable pulsed infrared free electron laser (FEL) at Vanderbilt University. Experimental results indicated a correlation of threshold fluence and ablation depth to the optical absorption properties of the calculi. When calculus optical absorption increased, the threshold fluences decreased. Although the ablation depths increased with calculus optical absorption, results indicated that in certain calculi the ablation depth was affected by optical attenuation through the ablation plume. These observations were in agreement with the photothermal ablation model, but fractures in striated calculi at higher optical absorptions indicated the contribution of a photomechanical mechanism     

Optimization and evaluation of reduced graphene oxide hydrogel composite as a demulsifier for heavy crude oil-in-water emulsion

The rising production of produced water from oilfields had been proven to bring detrimental environmental effects. In this study, an efficient, recyclable, and environmental-friendly reduced graphene oxide immobilized κ-Carrageenan hydrogel composite(κCa GO) was fabricated as an alternative sorbent for crude oil-in-water demulsification. Polyethyleneimine(PEI) was employed to form a stable hydrogel composite. The conditions for the immobilization of graphene oxide(GO) on PEI-modified κ-Carrageenan(κC) beads were optimized appropriately. An immobilization yield of 77% was attained at 2% PEI, 2 h immobilization activation time, and p H6.5. Moreover, the synthesized κCa GO is capable of demulsification with an average demulsification efficiency of 70%. It was found that the demulsification efficiency increases with salinity and κCa GO dosage, and it deteriorates under alkaline condition. These phenomena can be attributed to the interfacial interactions between κCa GO and the emulsion. Furthermore, the κCa GO can be recycled to use for up to six cycles without significant leaching and degradation. As such, the synthesized κCa GO could be further developed as a potential sorbent substitute for the separation of crude oil from produced water.     

X-Ray Radiation Effect in DRAM Retention Time

For quality verification, an X-ray inspection process is commonly being used for evaluating obscured and defective solder joints in surface-mount technologies, such as ball grid arrays and flip chips. Integrated circuits subjected to any form of radiation, i.e., ionizing or nonionizing, may incur some amount of damage depending on the absorbed dose. Though most X-ray inspections for high-quality imaging require ionizing dose amounts that are considered inconsequential for device failure or non-functionality, the degree of latent damage must be carefully considered. This paper discusses X-ray-induced vulnerabilities of high-density dynamic random access memory exposed to low ionizing radiation levels typical in X-ray inspection systems. We look at critical parameters and their sensitivity in relation to varying dose amounts of X-ray irradiation. In consideration of different methodologies of reducing radiation dose amounts and limiting device exposure, we propose a procedure for attenuating potentially harmful X-ray radiation levels while preserving quality images.     

Mechanisms for synergistic oxidation of organics in ultrapure watersystems

A mechanistic model is developed for the distribution, oxidation, and removal of organic impurities in typical polishing loops of ultrapure water (UPW) plants. The model is applied to the case of the oxidation of organics by ultraviolet (UV), ozone, and a unique method of adding ozone to the UV unit. The model is validated with direct experimental measurements using various oxidation tests. In particular, the accumulation problem related to the recalcitrant (hard to remove) impurities in the UPW systems with recycle is explained. The model is also used to analyze the dynamic behavior of polishing and reclaim/recycle loops. The results show the potential oscillatory behavior of UPW loops in case of impurity surges. This behavior is important and needs to be prevented to avoid metrology and control problems     

Preparation of Porous Tin Oxide Nanobelts Using the Electrospinning Technique

The electrospinning method is adopted to prepare utralong PEO/stannic hydroxide composite nanofibers. Tin-oxide nanobelts can be obtained by calcination of the composite nanofibers in an open atmosphere. The nanobelts were characterized by a field emission scanning electron microscope, X-ray diffraction, a transmission electron microscope, a Raman spectromicroscope, and Fourier transform infrared spectroscopy. Microstructural analysis has shown that the nanobelts prepared consist of a continuous network of interconnected SnO₂ grains. As a result, the SnO₂ nanobelts possess a high surface area and continuous porosity, which may be applied for the fabrication of sensitive gas sensors.