采用MAMMOS技术的高密度光记录

MAMMOS(Magnetic Amplifying Magneto－ Optical System:磁畴扩大磁光系统 )是实现高密度磁光盘的有效方法。不仅能得到不依赖于磁畴长度的较大的读出信号振幅,而且还能实现超出光学系统衍射极限的分辨率。过去,为实现磁畴的复印与扩大,要对记录膜面施加垂直方向的外部磁场。而现在得知,同时施加垂直磁场和水平方向的磁场,可大幅度地提高微小磁畴的读出特性。确认采用施加水平磁场的方法,在λ =635 nm, NA=0.55的条件下, 0.15μ m的连续磁畴也能获得 BER=2× 10－ 4的读出效果。     

An IR study on ion-specific and solvent-specific swelling of poly(N-vinyl-2-pyrrolidone) gel

Swelling degrees of poly(N-vinyl-2-pyrrolidone) (PVP) gel were measured in aqueous salt solutions and in water/organic solvent mixtures to find marked ion- and solvent-specificities. In order to investigate any correlation of those specificities with hydration or solvation of PVP, IR spectra band of the CO group was monitored by means of ATR method both for PVP gel and the relevant solution systems. Dependence of the peak frequency on the swelling ratio suggested that hydration of PVP carbonyl group in deswollen gel systems is different from that in the corresponding solution systems. In the solution systems, PVP carbonyl band showed a high-wavenumber shift for deswollen systems, which can be well correlated with changes in water proton charge through ionic hydration and with Gutmann's acceptor number of organic solvents. In the deswollen gel systems, the CO band showed a low-wavenumber shift, suggesting a strong hydration or doubly hydrated state. This unexpected behavior was interpreted by assuming an intermolecular hydrogen bond of two carbonyl groups intermediated by water molecules.     

Thermal decomposition processes in aromatic amine-based polybenzoxazines investigated by TGA and GC-MS

Three different aromatic amine-based polybenzoxazines are subjected to thermal decomposition in a thermogravimetric analyzer. The degradation products, which are volatile compounds evaporating out of the furnace as gases, are trapped and analyzed further by a gas chromatograph which is coupled with a mass selective detector (GC-MS). All the degradation products are separated by GC and come out at different retention times, as seen in the total ion chromatogram. All the compound's mass are selectively identified by MS. The chromatograms are divided into two regions; the low column temperature region containing low molecular weight and highly volatile compounds, and the high column temperature region containing higher molecular weight and less volatile compounds. The evolved gas analysis performed by GC-MS allows us to identify the molecular weight and also the structure of the volatiles. This information is then used to illustrate the processes occurring during the thermal decomposition of aromatic amine-based polybenzoxazines.     

Highly Reactive β-Dicalcium Silicate: III, Hydration Behavior at 40–80°C

The effect of curing temperature (40°, 60°, 80°C) on the hydration behavior of β-dicalcium silicate (β-C₂S) was investigated. The β-C₂S was obtained by decomposition of hillebrandite, Ca₂(SiO₃)(OH)₂, at 600°C, has a specific surface area of about 7 m²/g, and is in the form of fibrous crystals. The dependence of the hydration reaction on temperature continues until the reaction is completed. The hydration is completed in 1 day at 80°C and in 14 days at 14°C. The hydration mechanism is different above and below 60°C, but at a given temperature, the reaction mechanism and the silicate anion structures of C-S-H do not change significantly from the initial to the late stages of the reaction. High curing temperature and long curing times after completion of reaction promote silicate polymerization. The Ca/Si ratio of C-S-H shows high values, being almost 2.0 above 60°C and 1.95 below 40°C.     

An empirical approach for structure-based prediction of carbohydrate-binding sites on proteins

A computer program system was developed to predict carbohydrate-bindingsites on three-dimensional (3D) protein structures. The programssearch for binding sites by referring to the empirical rulesderived from the known 3D structures of carbohydrate–proteincomplexes. A total of 80 non-redundant carbohydrate–proteincomplex structures were selected from the Protein Data Bankfor the empirical rule construction. The performance of theprediction system was tested on 50 known complex structuresto determine whether the system could detect the known bindingsites. The known monosaccharide-binding sites were detectedamong the best three predictions in 59% of the cases, whichcovered 69% of the polysaccharide-binding sites in the targetproteins, when the performance was evaluated by the overlapbetween residue patches of predicted and known binding sites. Received April 24, 2003; revised June 2, 2003; accepted June 10, 2003.     

Poly(L‐lactide). X. Enhanced surface hydrophilicity and chain‐scission mechanisms of poly(L‐lactide) film in enzymatic,alkaline, and phosphate‐buffered solutions

Attempts were carried out to enhance the surface hydrophilicity of poly(L ‐lactide), that is, poly(L ‐lactic acid) (PLLA) film, utilizing enzymatic, alkaline, and autocatalytic hydrolyses in a proteinase K/Tris–HCL buffered solution system (37°C), in a 0.01N NaOH solution (37°C), and in a phosphate‐buffered solution (100°C), respectively. Moreover, its chain‐scission mechanisms in these different media were studied. The advancing contact‐angle (θ_a) value of the amorphous‐made PLLA film decreased monotonically with the hydrolysis time from 100° to 75° and 80° without a significant molecular weight decrease, when enzymatic and alkaline hydrolyses were continued for 60 min and 8 h, respectively. In contrast, a negligible change in the θ_a value was observed for the PLLA films even after the autocatalytic hydrolysis was continured for 16 h, when their bulk M_n decreased from 1.2 × 10⁵ to 2.2 × 10⁴ g mol^?1 or the number of hydrophilic terminal groups per unit weight increased from 1.7 × 10^?5 to 9.1 × 10^?5 mol g^?1. These findings, together with the result of gravimetry, revealed that the enzymatic and alkaline hydrolyses are powerful enough to enhance the practical surface hydrophilicity of the PLLA films because of their surface‐erosion mechanisms and that its practical surface hydrophilicity is controllable by varying the hydrolysis time. Moreover, autocatalytic hydrolysis is inappropriate to enhance the surface hydrophilicity, because of its bulk‐erosion mechanism. Alkaline hydrolysis is the best to enhance the hydrophilicity of the PLLA films without hydrolysis of the film cores, while the enzymatic hydrolysis is appropriate and inappropriate to enhance the surface hydrophilicity of bulky and thin PLLA materials, respectively, because a significant weight loss occurs before saturation of θ_a value. The changes in the weight loss and θ_a values during hydrolysis showed that exo chain scission as well as endo chain scission occurs in the presence of proteinase K, while in the alkaline and phosphate‐buffered solutions, hydrolysis proceeds via endo chain scission. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1628–1633, 2003     

Polyacrylonitrile/Nylon 6 Blends: Preparation and Characterization

Summary: Polyacrylonitrile (PAN) particles with micro‐size ranges (0.15–2 μm) were prepared by emulsion and dispersion polymerizationa and in supercritical carbon dioxide media. The PAN particles were blended with Nylon 6 (PA6) at 220 °C by using a miniature mixer; it was found that melt‐mixing was possible for PAN‐rich compositions as high as 70 wt.‐%. Blends were characterized by scanning electron microscopy, IR, viscosity measurements, differential scanning calorimetry, and dynamic mechanical thermal analysis (DMTA). The size and shape of original PAN particles were retained in PAN/PA6 blends. The useful range to blend PAN particles size was less than 1 μm in terms of shape retention of the PAN particles in blends. Blends with 40 wt.‐% PAN content were found to be melt‐processable. The elastic modulus was higher for PAN/PA6 blends than pure PA6.

SEM photograph of PAN‐SC/PA6 blend with a 40/60 weight ratio.     

Kinetically Stable Bicelles with Dilution Tolerance,Size Tunability,and Thermoresponsiveness for Drug Delivery Applications

Mixtures of a phospholipid (1,2‐dipalmitoyl‐sn‐glycero‐3‐phosphatidylcholine, DPPC) and a sodium‐cholate‐derived surfactant (SC‐C₅) at room temperature formed phospholipid bilayer fragments that were edge‐stabilized by SC‐C₅: so‐called “bicelles”. Because the bilayer melting point of DPPC (41 °C) is above room temperature and because SC‐C₅ has an exceptionally low critical micelle concentration (<0.5 mm ), the bicelles are kinetically frozen at room temperature. Consequently, they exist even when the mixture is diluted to a concentration of 0.04 wt %. In addition, the lateral size of the bicelles can be fine‐tuned by altering the molar ratio of DPPC to SC‐C₅. On heating to ≈37 °C, the bicelles transformed into micelles composed of DPPC and SC‐C₅. By taking advantage of the dilution tolerance, size tunability, and thermoresponsiveness, we demonstrated in vitro drug delivery based on use of the bicelles as carriers, which suggests their potential utility in transdermal drug delivery.     

EXPERIMENTAL STUDIES ON A NOVEL CHEMICAL HEAT PUMP DRYER USING A GAS-SOLID REACTION

The authors have been studying Chemical Heat Pumps (CHP) from the viewpoints of energy saving and environmental impact. The CHP can store thermal energy in the form of chemical energy by an endothermic reaction, and release it at various temperature levels during heat demand periods by exo/endothermic reactions. The authors have proposed in an earlier study a novel chemical heat pump (CHP) system for environmentally-friendly effective utilization of thermal energy in drying as a chemical heat pump dryer (CHPD). In this exploratory study, we test the effectiveness of operating the proposed CHPDs experimentally. Basic experiments on the CHPDs such as hot dry air production for convective drying are performed on lab-scale CHPD apparatuses using gas-solid reactions in calcium oxide/calcium hydroxide reactant beds. The proposed CHPDs are found to produce hot air by CHP operation for drying. The temperature levels of the produced hot air and the reaction rates/conversions are as good as in the case of hot water supply system using basically same CHP operation. The cold heat for air dehumidification is also found to be generated/recovered by the same CHPD system. The generated heat amounts can be increased by changing the operating conditions although the heat recovery must be enhanced for practical application of CHPDs.     

Oxidation of Low-Oxygen Silicon Carbide Fibers (Hi-Nicalon) in Carbon Dioxide

Polycarbosilane-derived low-oxygen SiC fibers, Hi-Nicalon, were heat-treated for 36 ks at temperatures from 1273 to 1773 K in CO₂ gas. The oxidation of the fibers was investigated through the examination of mass change, crystal phase, resistivity, morphology, and tensile strength. The mass gain, growth of β-SiC crystallites, reduction of resistivity of the fiber core, and formation of protective SiO₂ film were observed for the fibers after heat treatment in CO₂ gas. SiO₂ film crystallized into cristobalite above 1573 K. Despite the low oxygen potential of CO₂ gas ( p _O2= 1.22 Pa at 1273 K − 1.78 × 10² Pa at 1773 K), Hi-Nicalon fibers were passively oxidized at a high rate. There was a large loss of tensile strength in the as-oxidized state at higher temperatures because of imperfections in the SiO₂ film. On the other hand, the fiber cores showed better strength retention even after oxidation at 1773 K.