1–MCP结合EA对蓝靛果贮藏品质及活性氧代谢的影响

目的 探究不同处理对贮藏0~60 d期间蓝靛果实贮藏品质及活性氧(ROS)代谢的影响,为蓝靛果贮藏保鲜提供技术依据。方法 以蓝靛果为实验材料,采后将其装入保鲜箱中,用1−甲基环丙烯(1-MCP)、乙烯吸收剂(EA)、1-MCP+EA进行处理,在(−0.5±0.3)℃下贮藏60 d,每隔15 d取样观察果实的感官品质,并测定其营养、生理及活性氧代谢相关指标。结果 与对照组相比,3种处理方式均能保持果实较好的感官特性,延缓果实抗坏血酸、花色苷、总酚和黄酮等含量的流失,以及果实的软化;在贮藏60 d时,处理组果实的呼吸强度分别比对照组果实的呼吸强度低22.73、12.92、34.04 mg/(kg.h),乙烯生成速率分别比对照组果实的低6.38、3.98、10.11 μL/(kg.h);可抑制超氧阴离子(O2⁻.)活性、过氧化氢(H2O2)含量、丙二醛含量及相对电导率的升高,保持较高的超氧化物歧化酶(SOD)、过氧化氢酶(CAT)、过氧化物酶(POD)、抗坏血酸过氧化物酶(APX)活性。通过SPSS分析可知,综合得分顺序为CK＜EA＜1-MCP＜1-MCP+EA,表明1-MCP+EA处理的效果最好。结论 1-MCP+EA处理对蓝靛果贮藏60 d的保鲜效果最好,可更好地保留果实的外观和内在品质,利于运输和销售。     

基于ANSYS强度仿真与动力学测试的包装结构优化设计

目的 在保障机械结构强度的前提下,对消费量大的某泵用木包装结构进行优化设计,对机械强度进行CAE有限元仿真,并进行振动跌落冲击测试,以降低成本提高产品价值。方法 首先分析产品的使用功能,设计新型包装方案,将原有铁底板支撑结构优化改为用材更少的V型木质支撑结构,建立力学模型,进行底强度分析以及稳定性计算;然后运用SolidWorks建立3D模型,运用ANSYS Workbench进行仿真评估;最后生产出新型包装,并根据包装测试标准进行了测试。结果 新的包装结构用V型木质取代了铁底板支撑,节约了100%的铁质包装材料,并通过了冲击振动跌落测试。优化设计的新包装型式能满足运输过程中的冲击振动跌落等产品保护要求,满足运输稳定性的功能要求。结论 本文以价值工程理念为指导,优化设计的新包装结构,在满足产品功能的同时节约了成本,是价值工程在包装优化领域极好的运用,为机械工程领域包装工程师提供了设计参考和解决方案。     

含参量分数阶微分系统的基本分岔分析

本文中,我们讨论了含参量分数阶微分系统的基本分岔,即跨临界分岔、折叠分岔与音叉分岔.首先,根据分数阶Lyapunov方法,讨论了含参量分数阶微分系统的稳定性,并给出了这些基本分岔的相图.其次,根据Taylor展式与隐函数定理,研究了分数阶微分系统的规范形,从而求出这些基本分岔的拓扑规范形.     

Influence of Heat Input on Microstructure and Mechanical Properties of Laser Welding GH4169 Bolt Assembly—Numerical and Experimental Analysis

By conducting the numerical and experimental analysis, the influence of heat input on the microstructures and mechanical properties of laser welding GH4169 bolt assembly is systematically investigated. The weld formation, temperature field, and residual stress distribution during laser welding by using the finite element modeling are consistent with experimental results. The numerical simulation results show that the increase of heat input imparts lower residual stresses and higher temperature gradient. During the process of laser welding, the steepest temperature gradient and the peak residual stress arise in the fusion zone (FZ). In addition, the dissolution of γ″ and γ′ toward the fusion line increases in heat affected zone (HAZ), but only Laves phase is observed in FZ. With increasing heat input from 24 to 48 J mm⁻¹, the ultimate tensile strength of welded joints decreases. Both the lowest microhardness values and tensile failure of GH4169 alloy laser welded joint are in FZ. Herein, it is that the relationship among the heat input, microstructures, and mechanical properties of GH4196 bolt assembly in laser welding is systematically established, which will be of guiding significance for the selection of welding parameters in aerospace.     

Neural Machine Translation by Fusing Key Information of Text

When the Transformer proposed by Google in 2017, it was first used for machine translation tasks and achieved the state of the art at that time. Although the current neural machine translation model can generate high quality translation results, there are still mistranslations and omissions in the translation of key information of long sentences. On the other hand, the most important part in traditional translation tasks is the translation of key information. In the translation results, as long as the key information is translated accurately and completely, even if other parts of the results are translated incorrect, the final translation results’ quality can still be guaranteed. In order to solve the problem of mistranslation and missed translation effectively, and improve the accuracy and completeness of long sentence translation in machine translation, this paper proposes a key information fused neural machine translation model based on Transformer. The model proposed in this paper extracts the keywords of the source language text separately as the input of the encoder. After the same encoding as the source language text, it is fused with the output of the source language text encoded by the encoder, then the key information is processed and input into the decoder. With incorporating keyword information from the source language sentence, the model’s performance in the task of translating long sentences is very reliable. In order to verify the effectiveness of the method of fusion of key information proposed in this paper, a series of experiments were carried out on the verification set. The experimental results show that the Bilingual Evaluation Understudy (BLEU) score of the model proposed in this paper on the Workshop on Machine Translation (WMT) 2017 test dataset is higher than the BLEU score of Transformer proposed by Google on the WMT2017 test dataset. The experimental results show the advantages of the model proposed in this paper.     

Costimulatory molecule-deficient dendritic cell progenitors (MHC class II+, CD80dim, CD86-) prolong cardiac allograft survival in nonimmunosuppressed recipients

We have shown previously that granulocyte-macrophage colony-stimulating factor-stimulated mouse bone marrow-derived MHC class II+ dendritic cell (DC) progenitors that are deficient in cell surface expression of the costimulatory molecules B7-1 (CD80) and B7-2 (CD86) can induce alloantigen-specific T-cell anergy in vitro. To test the in vivo relevance of these findings, 2 x 10(6) B10 (H2b) mouse bone marrow-derived DC progenitors (NLDC 145+, MHC class II+, B7-1dim, B7-2-/dim) that induced T-cell hyporesponsiveness in vitro were injected systemically into normal C3H (H2k) recipients. Seven days later, the mice received heterotopic heart transplants from B10 donors. No immunosuppressive treatment was given. Median graft survival time was prolonged significantly from 9.5 to 22 days. Median graft survival time was also increased, although to a lesser extent (16.5 days), in mice that received third-party (BALB/c; H2d) DC progenitors. Ex vivo analysis of host T-cell responses to donor and third-party alloantigens 7 days after the injection of DC progenitors (the time of heart transplant) revealed minimal anti-donor mixed leukocyte reaction and cytotoxic T lymphocyte reactivity. These responses were reduced substantially compared with those of spleen cells from animals pretreated with "mature" granulocyte-macrophage colony-stimulating factor + interleukin-4-stimulated DC (MHC class IIbright, B7-1+, B7-2bright), many of which rejected their heart grafts in an accelerated fashion. Among the injected donor MHC class II+ DC progenitors that migrated to recipient secondary lymphoid tissue were cells that appeared to have up-regulated cell surface B7-1 and B7-2 molecule expression. This observation may explain, at least in part, the temporary or unstable nature of the hyporesponsiveness induced by the DC progenitors in nonimmunosuppressed recipients.     

中美信息安全意识培养模式的比较研究

文章通过对中美信息安全意识的培养模式进行比较研究,借鉴美国在该领域内的先进理念和经验,分析我国在该领域内存在的问题,对于促进全民信息安全意识的提升具有长远的意义。     

基于MAXQ3108+DS8102的三相智能电能表设计

针对目前市场上采用电磁式电流互感器作为电流传感器的三相智能电能表计量精度普遍易受外部强磁场干扰的不足,采用美信半导体公司提出的MAXQ3108+DS8102芯片组,解决方案设计了一款采用锰铜分流器作为电流传感器的三相智能电能表,解决了锰铜分流器采样电流方式下各相电压、电流信号与数据采集MCU电气隔离的技术瓶颈,并详细阐述了信号采集与测量的过程;样机测试结果表明:文中设计的三相智能电表能够有效抑制外部强磁场干扰,有功电能计量精度满足IEC62053标准中有功0.5S级相关技术指标要求。     

一种减少测距误差的传感器网络定位算法

接收信号强度(RSSI)常被作为无线传感器网络定位算法的测距技术,通常,获取的RSSI信号序列中同时存在随机误差和粗差两种误差,利用以往常用的算法都难以消除混合误差对RSSI测量统计数据的影响;在分析两种误差特征的基础上,提出了一种基于统计中值的加权定位算法,算法在去除粗差的基础上,能在一定程度上平滑了随机误差,算法不仅提高了定位的精度,同时提高了节点的覆盖率;理论分析和仿真结果都表明算法具有较高的定位精度和覆盖率,最优情况下定位精度较原先算法能够提高6.99%,而不可定位节点比例下降8.05%。     

参数稀疏信号非均匀采样性能分析

提出了一种参数稀疏信号的时间交替周期非均匀采样方案。相对于非均匀采样,周期非均匀采样可以在降低系统复杂度的前提下依然保持较高的转换速率。通过仿真证明,非均匀采样样本的超分辨率特性可以提高非线性最小二乘周期图谱估计的重构性能。