中小型模具企业的泄密问题及防范措施

列举了民营模具企业常见的几种泄密现象，并提出了防范措施。     

关于项目管理中施工进度控制的研究

阐述了项目管理中施工进度控制的地位与作用，分析了影响工程进度的因素，提出项目进度控制需做好的工作，以提高进度控制水平，确保合同工期的实现。     

Non-steady-state model for kinetics of free radical polymerization, 4. Direct thermal initiation

This paper deals with the non-steady-state kinetics of direct thermal initiated polymerization. The initiation is assumed to be a bimolecular reaction of the monomer. The relationship between the radical concentration and the monomer conversion is rigorously derived. In further treatment a few very close approximations are introduced based on the fact that the number of monomer molecules reacting in the initiation step is much less than that consumed in the propagation step for a process producing high polymer, and the value of the rate constant for propagation or chain transfer is much lower than that for chain termination. Expressions for various molecular parameters, such as molecular weight distribution, number-average and weight-average degrees of polymerization, and dispersity, are given. Several numerical examples are provided.     

铼的配位化学研究：Ⅰ.铼化合物的堆积饱和规律

将锝化合物稳定性研究中引入的改进的堆积模型用于铼化合物的稳定性研究。在查得４０６种不含金属－金属键的化合物结构基础上，对其立体角系数和进行了计算和分析，发现铼化合物的稳定中心为０．９５１，标准偏差为０．０８４，其２σ不大于一个常见配位原子的立体角系数，这反映了铼周围配位原子堆积的限度。     

混合集成电路激光功能调值技术

本文提出了激光功能微调技术在高精度混合集成电路上的应用，讨论了关键技术问题，并以实例具体说明。该技术的应用为研制高精度混合集成电路开辟了新途径。     

淀积条件对GDa—SiNx薄膜电学特性的影响

本文讨论了用辉光放电法制备氮化硅薄膜时衬底温度、射频功率和气体流量比对薄膜的电导率、介电常数和击穿强度的影响。通过优化生长条件，制备了优质非晶氮化硅薄膜，其介电常数为７．５、击穿强度为５．５ＭＶ／ｃｍ、电导率为１０－１３（Ωｃｍ）－１。     

石油系油浆与煤系闪蒸油的焦化性能——I．热解条件的影响

通过偏光显微镜观察了石油系油浆（LH）与煤系闪蒸油（SN）焦化后所得焦块的光学结构。结果表明，在较宽条件下两种原料单独焦化均得不到取向度高的流线型结构。将两种原料以一定比例混合后先热解丙焦化所得焦块的光学结构明显好于二者混合后直接焦化所得焦块的光学结构，其中LH和SN以3：2的重量比混合后在440℃、1MPa下热解3．5h然后再在530℃、1MPa下焦化8h所得焦块为具有较高取向度的流线型结构，适合于作为针状焦的起始原料。     

Flammability and thermal stability studies of ABS/Montmorillonite nanocomposite

Acrylonitrile–butadiene–styrene (ABS)/montmorillonite nanocomposites have been prepared using a direct melt intercalation technique by blending ABS and organophilic clay of two different particle sizes: OMTa (5 µm) and OMTb (38 µm). Their structure and flammability properties were characterized by X‐ray diffraction, high resolution electronic microscopy (HREM), thermogravimetric analysis (TGA) and cone calorimeter experiments. The results of HREM showed that ABS/5 wt% OMTa nanocomposite was a kind of intercalated–delaminated structure, while ABS/5 wt% OMTb nanocomposite was mainly an intercalated structure. The nanocomposites showed a lower heat release rate peak and higher thermal stability than the original ABS by TGA and cone calorimeter experiments. Also, the intercalated nanocomposite was more effective than an exfoliated–intercalated nanocomposite in fire retardancy. Copyright © 2003 Society of Chemical Industry     

MOS RF reliability subject to dynamic voltage stress-modeling and analysis

Dynamic stress on MOSFETs with 900-MHz inverter-like waveforms as well as static (or dc) stress were evaluated experimentally. It showed that the degradation due to dynamic stress is less than that of dc stress for our test transistors. A compact model is used to evaluate the degradation in radio frequency performances, such as transconductance, cutoff frequency, linearity, and noise figure. A class-AB power amplifier is presented as an example to demonstrate the effect of dynamic stress on RF circuit performance.     

Response of simulated propellant and explosives to projectile impact—II. Fragmentation

This paper is the second of a series concerned with the penetration and perforation phenomena in two types of propellant and explosive simulant, named Propergol, due to the impact at normal incidence of both blunt and conically-tipped steel strikers. The collision results in fragmentation, plug formation and generation of a cloud of debris that includes particles of measurable dimensions traveling with significant velocities. Both the fragment size and area as well as the ejecta mass are determined experimentally as a function of Propergol specimen thickness and impact velocity or energy. The cumulative number of fragments as a function of size for the Propergol is uniformly found to be a bi-linear semi-logarithmic relationship with the bifurcation occurring at the mean crystal radius. Individual crystals and the crater generated are examined by means of a scanning electron microscope.

A phenomenological model of the fragmentation process is constructed, based on an assumed spherical shape of the fragments and the bi-linear fragment distribution, using energy methods. This is combined with a perforation analysis that considers the process to be sequentially composed of initial indentation, fragmentation, and sliding and deflection of the Propergol disks. An evaluation of this model providing fragment volumes as a function of impact velocity is compared with experimental results and found to be in good agreement.