Infrared target tracking based on proximal robust principal component analysis method

Applied Intelligence - Infrared target tracking plays an important role in both civil and military fields. The main challenges in designing a robust and high-precision tracker for infrared...     

Enhanced semantic representation learning for implicit discourse relation classification

Applied Intelligence - Implicit discourse relation classification is one of the most challenging tasks in discourse parsing. Without connectives as linguistic clues, classifying discourse relations...     

Dynamic response of Kevlar®29/epoxy laminates under projectile impact-experimental investigation

This authors of this article investigated the dynamic response of woven Kevlar®29/epoxy laminates subjected to the impact loading. The cylindrical aluminum foam projectile and steel projectile were used to exert the impulse on the laminates. Deformation/failure modes, deflections, strain histories, and failure mechanisms were obtained and discussed. The results showed that with the high toughness of Kevlar fiber, the deformation modes of the laminates exhibited some characteristics similar to the metal panel, such as large global deformation. The failure mechanisms like matrix failure, fiber splitting, and fibrillation were observed. These micron failures led to the macroscopic delamination and fracture of the laminates.     

Application potential of bone marrow mesenchymal stem cell (BMSCs) based tissue-engineering for spinal cord defect repair in rat fetuses with spina bifida aperta

Spina bifida aperta are complex congenital malformations resulting from failure of fusion in the spinal neural tube during embryogenesis. Despite surgical repair of the defect, most patients who survive with spina bifida aperta have a multiple system handicap due to neuron deficiency of the defective spinal cord. Tissue engineering has emerged as a novel treatment for replacement of lost tissue. This study evaluated the prenatal surgical approach of transplanting a chitosan–gelatin scaffold seeded with bone marrow mesenchymal stem cells (BMSCs) in the healing the defective spinal cord of rat fetuses with retinoic acid induced spina bifida aperta. Scaffold characterisation revealed the porous structure, organic and amorphous content. This biomaterial promoted the adhesion, spreading and in vitro viability of the BMSCs. After transplantation of the scaffold combined with BMSCs, the defective region of spinal cord in rat fetuses with spina bifida aperta at E20 decreased obviously under stereomicroscopy, and the skin defect almost closed in many fetuses. The transplanted BMSCs in chitosan–gelatin scaffold survived, grew and expressed markers of neural stem cells and neurons in the defective spinal cord. In addition, the biomaterial presented high biocompatibility and slow biodegradation in vivo. In conclusion, prenatal transplantation of the scaffold combined with BMSCs could treat spinal cord defect in fetuses with spina bifida aperta by the regeneration of neurons and repairmen of defective region.     

Property-microstructure correlation in in situ formed Al2O3, TiB2 and Al3Ti mixture-reinforced aluminium composites

The in situ formed Al₂O₃, TiB₂ and Al₃Ti mixture-reinforced aluminium composites were successfully fabricated by the reaction sintering of the TiO₂-B-Al system in a vacuum. With increasing boron content in the TiO₂-B-Al system, the amount of generated TiB₂ in the composites increased and Al₃Ti content decreased. At the same time the distribution uniformity of the in situ formed Al₂O₃ and TiB₂ particulates was obviously improved, and the size of the Al₃Ti particles was reduced. The in situ Al₂O₃ and TiB₂ particulates had sizes from 0.096–1.88 m. The interface between the in situ formed particulates and the aluminium matrix was clean, and no consistent crystallographic orientation relationship was found. The strength and elastic modulus of the composites was significantly improved by lowering the Al₃Ti content. When the boron content in the TiO₂-B-Al system rose, the morphology of the tensile fracture surface of the composites was changed from large fractured Al₃Ti blocks and fine dimples, to fine dimples and pulled-out particulates. The strengthening and fracture of the composites have been modelled.     

Comparison of approaches based on optimization and algebraic iteration for binary tomography

Binary tomography represents a special category of tomographic problems, in which only two values are possible for the sought image pixels. The binary nature of the problems can potentially lead to a significant reduction in the number of view angles required for a satisfactory reconstruction, thusly enabling many interesting applications. However, the limited view angles result in a severely underdetermined system of equations, which is challenging to solve. Various approaches have been proposed to address such a challenge, and two categories of approaches include those based on optimization and those based on algebraic iteration. However, the relative strengths, limitations, and applicable ranges of these approaches have not been clearly defined in the past. Therefore, it is the main objective of this work to conduct a systematic comparison of approaches from each category. This comparison suggested that the approaches based on algebraic iteration offered both superior reconstruction fidelity and computation efficiency at low (two or three) view angles, and these advantages diminished at high view angles. Meanwhile, this work also investigated the application of regularization techniques, the selection of optimal regularization parameter, and the use of a local search technique for binary problems. We expect the results and conclusions reported in this work to provide valuable guidance for the design and development of algorithms for binary tomography problems.     

Direct raycasting of unstructured cell-centered data by discontinuity Roe-average computation

In the field of computational fluid dynamics (CFD), the upwind finite volume method (FVM) is widely applied to solve 3D flows with discontinuity phenomena (e.g., shock waves). It produces unstructured data at the center of each cell (cell-centered data) with the flow discontinuity constraint on the inner-face between face-neighboring cells. For visualization, existing approaches with interpolation usually pre-extrapolate cell-centered data into cell-vertexed data (data values given at cell vertices) and only handle cell-vertexed data during actual rendering, which unconsciously depress the rendering accuracy and violate the discontinuity constraint. In this paper, we propose a novel method to visualize cell-centered data directly avoiding extrapolation and keep the discontinuity in the rendering data on the framework of multi-pass raycasting. During resampling, the field is reconstructed using the original cell-centered data value and the cell-gradient estimated by Green–Gauss theorem. To keep the discontinuity, we reconstruct the field at an inner-face resampled point using both the face-adjacencies and get two discontinuous field values. Then the field is obtained by computing Roe-average of the two. The analysis and experiments demonstrate that our approach gains a high-accuracy reconstruction and leads to a high-quality image.