TS20XS系列DSP程序优化设计方法及应用

TS20XS系列DSP是一款高性能数字信号处理器＾［7］。由于在实际工程中对算法的实时性要求越来越高,所以要合理使用DSP的硬件资源和编程语言,进而减少指令的执行周期,提高算法的运行效率。．本文分别从TS20XS系列DSP两组寄存器组的使用、IF—DO—ELsE指令的使用、系数存储单元的合理分配、指令间延时的减少、双整型逻辑运算单元的综合运用这几方面探讨了DSP程序的优化设计方法,并结合实例给出优化设计结果。     

UMTS业务体系研究

首先给出了UMTS业务体系结构,然后研究了UMTS中常用的业务工具包。业务工具包是关于协议、环境和API的必要规范,主要包括用户SIM应用工具包（USAT）、移动运行环境（MExE）、移动网增强逻辑的客户化应用（CAMEL）、开放业务接入（OSA）。     

Joint order detection and blind channel estimation by least squaressmoothing

A joint order detection and blind estimation algorithm for single input multiple output channels is proposed. By exploiting the isomorphic relation between the channel input and output subspaces, it is shown that the channel order and channel impulse response are uniquely determined by finite least squares smoothing error sequences in the absence of noise. The proposed subspace algorithm is shown to have marked improvement over existing algorithms in performance and robustness in simulations     

Investigation of Infrared Photonic Crystal Slab with Defect Waveguides

This paper deals with the two dimensional (2-D) infrared photonic crystal slab with an air-bridge structure featuring defect waveguides in which the optical propagation properties were obtained by measurements of transmission spectra. 3-D finite-difference time-domain (FDTD) simulations have revealed the appearance of four defect propagation modes for the band structure and transmission spectra in the air-bridge slab. These defect modes were experimentally identified in the measured transmission spectra.     

Harmonic distortion due to laser modulation in multimode fibre optic analogue transmission

The effect of laser-diode frequency chirping on harmonic distortions in multimode fibre analogue transmission with direct intensity modulation was clarified experimentally with results in good agreement with the theory. The results show that the harmonic distortion can be greatly reduced by the reduction of the frequency chirping which accompanies diode-laser intensity modulation.     

Highly Stable Graphene‐Based Multilayer Films Immobilized via Covalent Bonds and Their Applications in Organic Field‐Effect Transistors

Highly stable graphene oxide (GO)‐based multilayered ultrathin films can be covalently immobilized on solid supports through a covalent‐based method. It is demonstrated that when (3‐aminopropyl) trimethoxysilane (APTMS), which works as a covalent cross‐linking agent, and GO nanosheets are assembled in an layer‐by‐layer (LBL) manner, GO nanosheets can be covalently grafted on the solid substrate successfully to produce uniform multilayered (APTMS/GO)N films over large‐area surfaces. Compared with conventional noncovalent LBL films constructed by electrostatic interactions, those assembled using this covalent‐based method display much higher stability and reproducibility. Upon thermal annealing‐induced reduction of the covalent (APTMS/GO)N films, the obtained reduced GO (RGO) films, (APTMS/RGO)N, preserve their basic structural characteristics. It is also shown that the as‐prepared covalent (APTMS/RGO)N multilayer films can be used as highly stable source/drain electrodes in organic field‐effect transistors (OFETs). When the number of bilayers of the (APTMS/RGO)N film exceeds 2 (ca. 2.7 nm), the OFETs based on (APTMS/RGO)N electrodes display much better electrical performance than devices based on 40 nm Au electrodes. The covalent protocol proposed may open up new opportunities for the construction of graphene‐based ultrathin films with excellent stability and reproducibility, which are desired for practical applications that require withstanding of multistep post‐production processes.     

Over 80 Gbit/s 2:1 multiplexer and low power selector ICs using InP/InGaAs DHBTs

A 2:1 multiplexer (MUX) and low power selector ICs have been successfully designed and manufactured using an InP/InGaAs DHBT technology. The 2:1 MUX has been tested at data rates up to 80 Gbit/s with an output swing of 600 mV, while the selector IC has achieved operation speed up to 90 Gbit/s at a power consumption of only 385 mW.     

iShopFloor: an Internet-enabled agent-based intelligent shop floor

Global competition is driving manufacturing companies to change the way they do business. New kinds of shop floor control systems need to be implemented for these companies to respond quickly to changing shop floor environments and customer demands. This paper presents a new concept called iShopFloor-an intelligent shop floor based on the Internet, web, and agent technologies. It focuses on the implementation of distributed intelligence in the manufacturing shop floor. The proposed approach provides the framework for components of a complex control system to work together as a whole rather than as a disjoint set. It encompasses both information architecture and integration methodologies. The paper introduces the basic concept of iShopFloor, a generic system architecture, and system components. It also describes the implementation of eXtensible Markup Language message services in iShopFloor and the application of intelligent agents to distributed manufacturing scheduling. A prototype environment is presented, and some implementation issues are discussed.     

CW performance of an InGaAs-GaAs-AlGaAs laterally-coupleddistributed feedback (LC-DFB) ridge laser diode

Single-mode distributed feedback (DFB) laser diodes typically require a two-step epitaxial growth or use of a corrugated substrate. We demonstrate InGaAs-GaAs-AlGaAs DFB lasers fabricated from a single epitaxial growth using lateral evanescent coupling of the optical field to a surface grating etched along the sides of the ridge. A CW threshold current of 25 mA and external quantum efficiency of 0.48 mW/mA per facet were measured for a 1 mm cavity length device with anti-reflection coated facets. Single-mode output powers as high as 11 mW per facet at 935 nm wavelength were attained. A coupling coefficient of at least 5.8 cm^-1 was calculated from the subthreshold spectrum taking into account the 2% residual facet reflectivity