The influence of monomer types on the colloidal stability in the miniemulsion copolymerization involving alkoxysilane monomer

Unlike conventional emulsion polymerization, monomer droplet nucleation becomes dominant in miniemulsion polymerization, offering the miniemulsion polymerization a great advantage over conventional emulsion polymerization when incorporating alkoxysilane monomer, which can easily undergo premature hydrolysis and condensation reactions, into polymer latex. The extensive premature hydrolysis and condensation can lead to the issue of the colloidal instability. In this article, the influence of monomer types on the colloidal stability in the miniemulsion co-(or ter-)polymerization was investigated when incorporating alkoxysilane monomer into styrene or acrylate latex. In the cases of butyl acrylate (BA)/γ-methacryoxypropytrimethoxysilane (MPMS), BA/methyl methyacrlate (MMA)/MPMS, and BA/styrene (St)/MPMS miniemulsion polymerization, nearly no coagulum was observed. The obtained latex had a long shelf life. However, the coagulum was formed in the late stage of MMA/MPMS and St/MPMS miniemulsion copolymerization. The shelf life of the corresponding latex was short. The selection of the main monomer, which can fast consume alkoxysilane comonomer, was critical to obtain the stable latex. In this way, the alkoxysilane groups were completely buried in particles thus the coagulation caused by condensation reactions derived from the alkoxysilane hydrolysis among particles was suppressed.     

乙酸苏合香酯的合成

乙酸苏合香酯是一种重要的酯类香料。本文研究了由乙苯、氯气和乙苯、N-溴代丁二酰亚胺反应来制取α-卤代乙苯，进而合成乙酸苏合香酯的方法，并主要探讨了光氯化合成乙酸苏合香酯中间体α-氯乙苯的方法。     

Photoelectric conversion of photosynthetic reaction center in multilayered films fabricated by layer-by-layer assembly

Multilayered protein films which contained ordered layers of photosynthetic reaction center (RC) from Rhodobacter Sphaeroides (RS601) were assembled by means of alternate electrostatic adsorption with positively charged poly(diallyldimethylammonium chloride) (PDDA). The assembly of RC was monitored by spectrometry and photocurrent measurement. Linear film growth was observed up to about 20 cycles of adsorption. For the monolayer film, the photocurrent was about 8.5 nA cm⁻². For the multilayered film, the total photocurrent was about 77 nA cm⁻² for the 24-layer RC film, while the average photocurrent increment per adsorption cycle was about 3.2 nA cm⁻². The overall light-to-electricity conversion efficiency for a 24-layer film was about eight times higher than that for the monolayer one. The effects of electrode potential and pH on the photocurrent were also measured to illustrate the light-to-electric converting mechanism.     

Polyimide/montmorillonite nanocomposites based on thermally stable, rigid-rod aromatic amine modifiers

The preparation and processing of most of polymer/clay nanocomposites need high temperature. This limited the application of commonly used organic modifiers of long carbon-chain alkyl ammonium salts because of their low thermal stability. In this study, we synthesized two novel thermally stable, rigid-rod aromatic amines. Montmorillonite (MMT) treated by these amines exhibited larger layer-to-layer spacing, higher thermal stability than that treated by commonly used 1-hexadecylamine and also high ion-exchange ratio (>95%). They were applied to prepare nanocomposites with polyimide (PI) by in situ polymerization. XRD, TEM were used to obtain the information on morphological structure of PI/MMT nanocomposites. DMA, TGA, DSC, universal tester were applied to characterize the mechanical and thermal properties of the nanocomposites. When the MMT content was below 3 wt%, the PI/MMT nanocomposites were strengthened and toughened at the same time. The introduction of a small amount of MMT also led to improvement in thermal stability, slight increase in glass transition temperature, marked decrease in coefficient of thermal expansion and decrease in solvent uptake. MMT treated by these aromatic amines exhibited better dispersibility and (probably) interfacial interaction with PI matrix than that treated by 1-hexadecylamine. The nanocomposites based on these MMT resultantly exhibited better mechanical, thermal and solvent resistance properties than those based on 1-hexadecylamine treated MMT.     

浅谈聚氯乙烯糊用掺混树脂的开发与应用

简要介绍了聚氯乙烯糊用掺混树脂的性能，规格，用途和制备方法，对国内掺混树脂开发中存在的问题提出了建议。     

Catalytic aerobic oxidation of ethylbenzene over Co/SBA-15

Co(II)O was highly dispersed in the mesopores of SBA-15 by alcoholic impregnation method and characterized by XRD, TEM, UV–VIS DRS, TPR, and XRF techniques. It was found that tetrahedral coordinated Co(II)O was stabilized by SBA-15 at low Co-loading. Co/SBA-15 showed much higher activity than Co(OAc)₂ or Co₃O₄ in the liquid-phase aerobic oxidation of ethylbenzene under solvent-free condition.     

Preparation and characterization of antibacterial silver-dispersed activated carbon aerogels

Silver-dispersed carbon aerogels (CAs) were obtained by direct immersion of organic aerogels prepared by ambient pressure drying technique in AgNO₃ aqueous solution and then carbonization. The effect of preparation conditions such as the resorcinol/catalyst ratio, the feed AgNO₃ concentration, the ratio of aerogel mass/solution volume, immersion time and carbonization temperature on the bulk density and silver content as well as the BET surface area of the dispersed CAs was studied. The dispersion and structure of silver nanoparticles in obtained materials were investigated by means of scanning electron microscopy, transmission electron microscopy and X-ray diffraction. The Ag-dispersed CAs prepared exhibit strong and long-term antibacterial activity.     

Lipase-catalyzed esterification of lactic acid with straight-chain alcohols

Enzymatic synthesis of esters of lactic acid and straight-chain alcohols with different chain lengths (C₆–C₁₈) were investigated in batch reactions with hexadecanol (C₁₆) as the model alcohol. Cyclohexane was the best solvent for higher ester yields, and the best biocatalyst was the immobilized Candida antarctica lipase B (Novozym 435) as well as the textile-immobilized Candida sp. lipase. A method was established to obtain ester yields in the range of 71 to 82% for the different alcohols, and the most favorable conditions for the esterification reaction using Novozym 435 were an equimolar ratio of lactic acid to alcohol, each at a concentration of 120 mM each; a 50°C reaction temperature; 190 rpm shaking speed; and the addition of 100 mg molecular sieves (4 Å) for drying. The ester yield increased with increasing lipase load, and a yield of 79.2% could be obtained after 24 h of reaction at 20 wt% of Novozym 435. The immobilized Candida sp. lipase prepared in the laboratory also could be used to produce esters of lactic acid and straight-chain alcohols, but it had a much lower activity than Novozym 435 with a temperature optimum of 40°C.     

真空蒸馏法从铟中脱除Cd、Tl的研究

介绍真空蒸馏法取代传统试剂法从铟中脱除镉和铊。通过实验研究了采用真空蒸馏的方法从铟中脱除铊的最佳工艺条件。实验表明,控制蒸馏温度950℃,恒温时间40m in,即可使残余物中铊的含量为0.0006%,铟的挥发率2.14%。