北京谱仪端盖簇射计数器工作气体的研究

为使北京谱仪端盖族射计数器更好地工作在自猝灭流光ＳＱＳ模式下，提高其能量分辨以及线性等指标，用Ａｒ，ＣＯ２，Ｌｓｏｂｕｔａｎｅ三元工作气体对探测器的工作性能进行了仔细研究，找出了一适合于主雇地数器的工作气体，此外，还研究了异丁的纯度对探测器性能的影响。     

云南锰矿选矿现状与前景分析

云南锰矿资源丰富,具有品位高、低磷低铁、易选等特点。文章概述了斗南、鹤庆、建水等锰矿的选矿科研进展情况,三个锰矿均可采用强磁选或磁-重选流程选别,可提高品位8—12％;精矿含锰可达33—35％,锰回收率在80％以上的好结果。     

Nonlinear Kerr interactions between modulated waves propagating ina single-mode fiber

The interactions induced by the nonlinear refractive index in a single-mode optical fiber (Kerr effect) between a modulated wave and a carrier wave have been investigated for amplitude shift keying (ASK), frequency shift keying (FSK), and phase shift keying (PSK). The theoretical analysis, based on a time-domain solution, exploits the well-known formalism of self-phase modulation to describe the propagation of the input electric field in the fiber. The theoretical results were validated experimentally for amplitude- and phase-modulated waves with heterodyne detection techniques. These experiments mimic a coherent transmission system and allow the measurement of the spectrum of each of the waves that participate in the nonlinear interaction     

Adaptive predictive control algorithm based on Laguerre Functional Model

Laguerre Functional Model has many advantages such as good approximation capability for the variances of system time‐delay, order and other structural parameters, low computational complexity, and the facility of online parameter identification, etc., so this model is suitable for complex industrial process control. A series of successful applications have been gained in linear and non‐linear predictive control fields by the control algorithm based on Laguerre Functional Model, however, former researchers have not systemically brought forward the theoretical analyses of the stability, robustness, and steady‐state performance of this algorithm, which are the keys to guarantee the feasibility of the control algorithm fundamentally. Aimed at this problem, we introduce the principles of the Incremental Mode Linear Laguerre Predictive Control (IMLLPC) algorithm, and then systemically propose the theoretical analyses and proofs of the stability and robustness of the algorithm, in addition, we also put forward the steady‐state performance analysis. At last, the control performances of this algorithm on two different physical industrial plants are presented in detail, and a number of experimental results validate the feasibility and superiority of IMLLPC algorithm. Copyright © 2005 John Wiley & Sons, Ltd.     

Assessment of underground cable ratings based on distributed temperature sensing

Numerous power utilities have installed advanced distributed temperature sensing (DTS) systems to measure the temperature of underground cables. This paper presents a general procedure for real-time assessment of underground cable ratings based on DTS. After the identification and location of hot spots on a cable, the cable installation data, load, and DTS-recorded temperature over a period of time are used to estimate soil thermal parameters and assess cable ratings under normal and overloading conditions. In order to accurately estimate soil thermal parameters, a combined technique of the finite-element method and gradient-based optimization is used. The technique was validated in the laboratory and applied to a rating assessment of a 230-kV/500-MVA cable circuit. The assessed continuous and emergency ratings are helpful in improving the operation of this circuit.     

Reliability Modeling and Analysis of Communication Networks with Dependent Failures

This paper presents a new model to study the reliability of communication networks in which link failures are statistically dependent. The approach tries to identify and model explicitly the events that cause communication link failures. No conditional probabilities are needed, and so two major difficulties inherent to them, namely, an exponential number of conditional probabilities to deal with and a consistency requirement to satisfy, are avoided. For reliability computations, some existing algorithms for finding network reliability can be used with minor modifications and no significant increase in computational complexity.     

简易高性能纳秒脉冲发生器

为了实现电子散射飞行时间谱仪电子束的脉冲化及产生时一幅变换器的启动或停止信号。我们利用开关晶体管的雪崩特性研制了一个性能好，成本低的纳秒脉冲发生器。该发生器输出上升时间好于Ｉｎｓ，幅度达１０Ｖ的负尖脉冲，用作时一幅变换器的启动或停止信号；也输出上升时间约３ｎｓ，幅度５－３０Ｖ连续可调和宽度５－２３０ｎｓ可调的正脉冲，用作电子束脉冲化的调制信号，脉冲重复率为１５０×１０＾３ｓ＾－１。它可广泛用于类似     

X射线聚束透镜原理及其应用

本文阐述了一种新型的Ｘ射线聚束装置─—Ｘ射线透镜的聚束原理。给出了透镜的基本设计方法，并对它应用于Ｘ射线光刻研究领域的前景作了展望。     

高纯锗探测器的快定时性能及其应用

为了将高纯锗（ＨＰＧｅ）探测器用于快定时的物理实验中，本实验研究厂影响高纯锗探测器定时谱仪时间性能的各种因素，找出了获得谱仪最小时间分辨的各种最佳参数。并建立了分辨时间为４．１９ｎｓ，能量分辨率为２０ｋｅＶ，微分非线性好于±２．０％，计效率可承受１２０×１０￣３ｓ￣（－１）的时间微分扰动角关联谱仪。利用此谱仪，以￣（２０４）Ｂｉ为探针核，研究了Ｂｉ系高温超导的微观机理，取得了较好的结果。