电感电容损耗电阻的讨论

通过对电容电感阻抗的测量，发现实验值偏离理论值。定性地分析了误差的来源，得出的结论是电感电容内部的损耗电阻随着频率的变化而变化，变化方向相反而并非相同。     

提高磷酸二铵产品质量方法浅析

针对磷酸二铵(DAP)产品养分波动大、含水量偏高、易结块、颜色变化大等缺点,在生产过程中采取了相应的解决措施,如配矿、联产、设备改造、工艺指标调整等,使DAP装置不仅保持了原有的优点,而且产品质量问题也得到了有效解决。养分基本保持在64.0%~64.6%,水分下降到2.1%~2.2%,结块现象较少,颜色也比较统一。     

Effect of additives on formation of natural gas hydrate

The formation of natural gas hydrate (NGH) is studied in this work. Kinetics data of hydrate formation with no agitation were collected at various concentrations of the aqueous solutions with different additives such as alkylpolyglucside, sodium dodecyl benzene sulfonate and potassium oxalate monohydrate. Various kinds of additive increased the formation rates of NGH and its storage capacity and reduced the induction time of NGH formation. Moreover, the storage capacity, the induction time and the hydrate formation rate were influenced by the concentration of the aqueous solution.     

用预分解技术改造Φ4×60m预热器窑的又一成功实例

介绍南京水泥工业设计研究院用预分解生产技术对山东水泥厂Φ4×60m预热器窑烧成系统进行的成功技术改造。技改设计指标为：熟料产量保证指标1500t／d，争取指标1700t／d，熟料热耗＜3762kJ／kg，熟料28d抗压强度＞60MPa。整个工程停产施工耗时仅用48d，烧成系统技改共耗资约3000万元。技改后一次点火投料成功，且点火当月即实现72h达标考核，所有设计指标均达标。     

Improvement of Microwave Loss Tangent and Tunability of Ba0.55Sr0.45TiO3/MgO Composites Using the Heterogeneous Precipitation Method

Ba_0.55Sr_0.45TiO₃/MgO composites were successfully prepared by the heterogeneous precipitation method and their structural, surface morphological, tunable properties, and dielectric properties at microwave frequency were systemically investigated. Compared with the sample prepared by the traditional solid-state method, the sample prepared by the heterogeneous precipitation method exhibits a smaller grain size, more uniform microstructure, higher tunability, and lower microwave loss, and these properties are very beneficial to the development of the microwave tunable devices application. Moreover, the effects of La₂O₃ doping on the dielectric and tunable properties of BST/MgO composites are investigated. The result shows that the La³⁺-doped sample has higher tunability and lower microwave loss than the undoped one.     

Parametrized Maximum Principle Preserving Flux Limiters for High Order Schemes Solving Multi-Dimensional Scalar Hyperbolic Conservation Laws

In this paper, we will extend the strict maximum principle preserving flux limiting technique developed for one dimensional scalar hyperbolic conservation laws to the two-dimensional scalar problems. The parametrized flux limiters and their determination from decoupling maximum principle preserving constraint is presented in a compact way for two-dimensional problems. With the compact fashion that the decoupling is carried out, the technique can be easily applied to high order finite difference and finite volume schemes for multi-dimensional scalar hyperbolic problems. For the two-dimensional problem, the successively defined flux limiters are developed for the multi-stage total-variation-diminishing Runge–Kutta time-discretization to improve the efficiency of computation. The high order schemes with successive flux limiters provide high order approximation and maintain strict maximum principle with mild Courant-Friedrichs-Lewy constraint. Two dimensional numerical evidence is given to demonstrate the capability of the proposed approach.     

Preparation,characterization, and adsorption properties for metal ions of a novel chelating resin containing sulfoxide and diethylene glycol

A novel chelating resin containing sulfoxide and diethylene glycol, poly{4‐vinylbenzyl‐[2‐2‐(hydroxyethyl)ethoxyl]sulfoxide} (PVESO) was synthesized using chloromethylated polystyrene (PS‐Cl) as material. Its structure was characterized by elemental analysis, infrared spectra, and scanning electron microscopy (SEM). The adsorption capacities of the resin for Hg²⁺, Ag⁺, Cu²⁺, Zn²⁺, and Pb²⁺ at various pH values were determined. The maximum adsorption capacities for Hg²⁺ and Ag⁺ were 1.56 and 0.75 mmol g^?1 respectively. The resin had high selectivity for Hg²⁺ and Ag⁺ over the pH range 1.0–7.0. The adsorption capacities for Hg²⁺ and Ag⁺ under competitive condition were also determined by batch experiment method. In addition, the adsorption kinetics of the resin towards Hg²⁺ at different temperatures was also investigated. The results showed that the adsorption rate was governed by film diffusion at 20°C and 25°C, by particle diffusion at 30°C and 35°C. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 6054–6059, 2006     

PPS的共混改性

简要介绍了聚苯硫醚(PPS)与其他聚合物进行共混改性的研究进展。着重讨论了PPS PA66、PPS PC、PPS PPO等的共混及其性能。此外,展望了PPS合金的发展前景。     

Studies on membrane formation mechanism by the light transmission technique. I

New parameters, light transmission rate and minimum light transmissions, are proposed. These two parameters reflect the characteristics of the membrane‐forming system and the formation process of the membranes by phase inversion. The relationship between the light transmission and the porous structure of the membrane can be explained by the geometrical optics principles. Variation of the two parameters combining Reuvers's phase separation theory provided a convenient analytical method to predict effectively membrane morphologies. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 174–181, 2003     

应用WCA微扰理论推算非极性液体比热容的新方法

本文首次将统计热力学的Ｗｅｅｋｓ－Ｃｈａｎｄｌｅｒ－Ａｎｄｅｒｓｏｎ（简称ＷＣＡ）微扰理论应用于非极性液体定容比热容和定压比热容的推算，用一些液体的ｐ－ｖ－Ｔ实验数据拟合了理论中所用ＬＪ势能函数的势能参数，并提出一个通用关联式。本文方法具有通用性，在编制的计算程序中只需输入物质的临界温度、临界比容、偏心因子等就能算出相应的比热容，工程应用十分方便。