Silicon power MOSFET at low temperatures: A two-dimensional computer simulation study

Understanding how the structure of the unit-cell affects the cryogenic performance of a Si power Metal Oxide Semiconductor Field Effect Transistor (MOSFET) is an important step toward optimizing of the device for cryogenic operations. In this paper, numerical simulations of the Si power Double Diffused MOSFET’ (DMOS) are performed at room temperature and cryogenic temperatures. Physically based models for temperature dependent silicon properties are employed in the simulations. The performances of power DMOS’ with various unit-cell structures are compared at both room temperature and low temperatures. The effect of the cell structure on the on-resistance and breakdown voltage of the device are analyzed. The simulation results suggest that the device optimized for room temperature operation can be further optimized at cryogenic temperatures.     

澳大利亚铁矿业的先进技术介绍

介绍了澳大利亚RioTinto矿业集团的HIsmelt Plant、帕拉布杜和恰那铁矿、汤姆普莱斯铁矿、扬地库吉那铁矿、皮尔巴拉铁路公司和Dampier港的先进技术、质量控制体系、生产体系，及其作业的主要步骤、不同矿体的矿石特性、铁路系统运作和丹皮尔港的基本情况。     

环境资源负外部性与产权理论的新进展

环境资源共有产权的特性使得社会成员只能通过自身感知和理解确定对环境资源的产权边界，并且产权的实施是非排他的，所以与环境资源有关的负外部性较其他具有直接因果关系的外部性特殊。在治理这类负外部性的过程中，产权理论也有了新的发展。本文从分析环境资源产权的特殊性入手，对于产权弱化、产权分割、创建新产权和自愿合作基础上认知产权调整等负外部性内部化理论进行了分析。     

Direct evaluation of singular integrals in elastoplastic analysis by the boundary element method

This paper presents a new method for the direct and accurate evaluation of strongly singular integrals in the sense of Cauchy principal values and weakly singular integrals over quadratic boundary elements in three-dimensional stress analysis and quadratic internal cells in two-dimensional elastoplastic analysis by the boundary element method. A quadratic triangle polar co-ordinate transformation technique is applied to reduce the order of singularity of the singular integrals. Next, a form of Stokes' theorem is introduced in order to remove the singularity in the Cauchy principal value integrals; therefore, the evaluation of these integrals can be carried out by standard Gaussian quadrature. Numerical examples of 2-D elastoplastic problems and a 3-D elastic problem show the effectiveness and efficiency of the method.     

机载雷达成像中的两种改进多普勒质心估计算法

多普勒质心估计是机载脉冲多普勒雷达DBS成像技术中最为关键的步骤之一.本文针对载机惯导参数误差较大的实际情况,提出了改进的频域和时域多普勒质心估计算法.新的算法克服了传统算法受地面场景非均匀性和回波信号起伏的影响,大大提高了估计的精度.最后将这些算法用于某型脉冲多普勒雷达的实测数据,成像结果证明了算法的有效性.     

低压铸造流动与传热耦合计算的研究

根据低压铸造充型流动的特点 ,利用计算机数值模拟技术 ,对低压铸造充型阶段的流动怀传热过程进行了耦合计算 ,从而保证了模拟结果的准确性和可靠性。在此基础上开发出了模拟软件 ,并对实际低压铸件进行了模拟分析 ,结果与实际生产情况吻合很好     

对硝基苯偶氮2-羟基萘-3-甲酰烷基胺系聚丙烯纤维用红色染料的合成及应用

本文将2,3-酸在甲苯溶剂中用氯化亚砜酰氯化合成2-羟基萘-3-甲酰氯,将其分别和正丁胺、正辛胺、正十二胺和正十八胺反应制得4种不同碳链长度的2-羟基萘-3-甲酰烷基胺,用对硝基苯胺重氮盐与其偶合分别制得了对硝基苯偶氮2-羟基萘-3-甲酰正丁胺、对硝基苯偶氮2-羟基萘-3-甲酰正辛胺、对硝基苯偶氮2-羟基萘-3-甲酰正十二胺和对硝基苯偶氮2-羟基萘-3-甲酰正十八胺系聚丙烯纤维用红色染料。熔点分别为189.8℃、96.2℃、115.8℃和108.1℃;热分解点分别为273.1℃、216.0℃、258.0℃和221.0℃;最大吸收波长分别为515.8nm、516.8nm、513.6nm和514.2nm。在染色条件下,4支染料在聚丙烯纤维上的上染率分别37.6％、41.8％、42.4％和44.7％。     

β放射性气体浓度计的新分度方法

本文介绍β放射性气体浓度计的一种新的分度方法——泄漏元件排气法。其特点是一只元件可分度放射性气体浓度计的许多读出数(甚至是几个量程),操作方便。     

森林火灾的气象卫星监测方法

森林火灾是造成森林资源破坏的重大灾害之一。作者根据近年来从事森林火灾卫星监刚的实践，结合国内外有关利用气象卫星监测林火的资料，介绍了林火卫星监测的原理、方法和实用效果。     

Improved coupled-mode theory of anisotropic optical waveguides

A coupled-mode equation for anisotropic waveguide systems of arbitrary cross section and general dielectric distribution is derived. Numerical results comparing the exact calculations to those of the method of Hardy et al. (Opt. Lett., vol.11, 742-4, 1986) show that the same accuracy can be obtained not only for TE, but also for TM mode coupling in the case of anisotropic waveguides, and the improved coupled-mode theory is applicable to the situation when moderately strong coupling occurs under the condition where the edge-to-edge separation of two coupled guides D₂ is about 0.1 μm