In situ synchrotron X-ray diffraction analysis of deformation behavior of a Nb/NiTi composite for biomedical applications

The deformation behavior involved in Nb/NiTi composite for biomedical applications within a large macroscopic strain range was investigated by tensile loading-unloading test and in situ synchrotron X-ray diffraction(SXRD).Experimental results show that during loading,the Nb/NiTi composite experiences the elastic elongation of B2-NiTi austenitic,B19'-NiTi martensitic and β-Nb phases,B2→ B19' stress-induced martensitic(SIM) transformation and tensile plastic deformation of β-Nb phase.During unloading,the deformation behavior involved in Nb/NiTi composite includes the elastic recovery of B2-NiTi austenitic,B19'-NiTi martensitic and β-Nb phases,reverse phase transformation B19'→B2 and compressive deformation of p-Nb phase.The martensitic transformation in this composite is almost reversible and occurs in a localized manner.These results might contribute to a comprehensive understanding of the deformation mechanism involved in Nb/NiTi composite and shed some light on design and development of novel composites with a combination of good biocompatibility and excellent superelasticity for biomedical applications.     

Sogatella furcifera Saliva Mucin-like Protein Is Required for Feeding and Induces Rice Defences

The white-backed planthopper (WBPH), Sogatella furcifera, is one of the most important piercing-sucking pests of rice (Oryza sativa) in Asia. Mucin-like salivary protein (SFMLP) is highly expressed in the salivary glands of WBPH, which plays an important role in WBPH feeding. In this study, WBPH injected with dsSFMLP had difficulty in sucking phloem sap from rice plants, which significantly reduced their food intake, weight, and survival. In contrast, the knockdown of the SFMLP gene had only a marginal effect on the survival of WBPH fed an artificial diet. Further studies showed that silencing SFMLP resulted in the short and single-branched salivary sheaths secretion and less formation of salivary flanges in rice. These data suggest that SFMLP is involved in the formation of the salivary sheath and is essential for feeding in WBPH. Overexpression of the SFMLP gene in rice plants promoted the feeding of WBPH, whereas silencing the gene in rice plants significantly decreased WBPH performance. Additionally, it was found that overexpression of SFMLP in rice plants elicited the signalling pathway of SA (salicylic acid) while suppressing JA (jasmonic acid); in contrast, silencing of the SFMLP gene in rice plants showed the opposite results. This study clarified the function of SFMLP in WBPH feeding as well as mediating rice defences.     

氧弹式量热计测定燃烧焓实验操作条件的改进

GR-3500型氧弹式量热计做燃烧焓的测定实验时间长,操作难度大,实验一次性成功率低.通过放宽对实验过程中夹层与量热容器的水温差值要求,实验结果表明夹层水温高于量热容器水温的0.5～3.0℃都是可行的,这样便于学生调节水温,缩短实验时间,取得良好的实验效果.     

透明聚丙烯EP2X32G结晶性能研究

通过差示扫描量热仪和广角X光衍射等分析方法,研究EP2X32G及其基料的结晶性能。结果表明,EP2X32G及其基料中存在α和γ两种晶型。     

Decode‐and‐forward with full‐duplex relaying

This paper addresses the full‐duplex relaying. Some expressions for outage and average capacity of a two‐hop cooperative system with a full‐duplex relay are derived under an independent but not identically distributed Rayleigh fading environment. Using these expressions, we provide the performance analysis without Monte Carlo simulations. The impact of interference between the relay output and input is investigated. Copyright © 2011 John Wiley & Sons, Ltd.     

VoIP电话的安全问题及防护措施

VoIP电话是综合了传统电信技术与计算机网络技术的一种新型应用。VoIP电话在传输时将信号压缩后封装成IP包，在IP网络上传输，这种传输方式存在着各种安全隐患。讨论了VoIP电话多种可能存在的安全问题，并就这些安全问题作了详细的分析，同时提出了防护措施，以最大限度地保障VoIP电话的安全。     

基于可穿戴传感器数据的人体行为识别数据特征提取方法

随着可穿戴设备的发展与普及,基于可穿戴传感数据进行人体行为检测展现了巨大的研究价值.目前大多人类行为识别工作都是基于视频图像展开的,然而,使用计算机视觉技术进行人类行为识别存在2个挑战:一是很难使参与数据采集的人员在自然状态下采集真实状态下的运动数据,在开展数据采集之前往往需要对参与数据采集的人员进行培训并严格规范其采...     

Electrolyte/Structure?Dependent Cocktail Mediation Enabling High?Rate/Low?Plateau Metal Sulfide Anodes for Sodium Storage

As promising anodes for sodium-ion batteries, metal sulfides ubiquitously suffer from low-rate and high-plateau issues, greatly hindering their application in f...     

Synthesis and characterization of La2Ti2O7 employed for photocatalytic degradation of reactive red 22 dyestuff in aqueous solution

Perovskite structured La₂Ti₂O₇ catalyst prepared by polymerized complex method was characterized and examined the photocatalytic activity by decomposing an azo dyestuff, Reactive Red 22, in aqueous solutions under UV irradiation. La₂Ti₂O₇ powders prepared by polymerized complex method exhibit higher surface areas, better homogeneity and are more sensitive to solution than those prepared by solid-state method. The first derivatives of UV–vis DRS patterns confirmed the complete crystallization of La₂Ti₂O₇ sintered at temperatures higher than 900 °C. The effects of sintering temperature of catalyst and solution pH of photocatalytic reaction were studied. The photocatalytic decomposition of Reactive Red 22 per unit surface area was found to be higher for experiments using La₂Ti₂O₇ than using TiO₂. However, the electron–hole recombination was found to be more obvious for La₂Ti₂O₇ than for TiO₂ because the network of metal cations constructed within La₂Ti₂O₇ enhances the mobility of photogenerated electrons and holes.     

Study on Microstructure and Mechanical Properties of Hot Rolled Low Silicon Containing Phosphorus TRIP Steel

The effects of final air cooling temperature on the microstructure and mechanical properties of hot rolled 0.2C-1.9Mn-0.5Si-0.08P TRIP steel were studied by utilizing OM, SEM, TEM and tensile tests. Experimental results showed that in the multiphase microstructure of the investigated steel when the finish rolling temperature was about 820 ℃ and the final air cooling temperature was in the range of 630-700 ℃, the grain size of most of ferrite was finer (about 4 μm) and which had higher dislocation density, t...