基于 Markov助航灯光回路阻值变化预测模型的研究

通过研究当前助航灯光回路阻值数据来判断助航灯光回路的工作状态,提出基于马尔科夫链理论的助航灯光回路阻值变化趋势预测模型.从仿真结果可知,模型预测的灯光回路阻值的变化趋势与实际灯光阻值的变化趋势相吻合,使助航灯光回路的维护工作计划更精确、更具方向性.     

WiNoC中基于Edge first算法的流量平衡设计

在无线片上网络中,无线节点拥塞以及不同子网和全局网络内的流量平衡情况对整个片上网络的通信效率有着重要的影响,为此提出了基于Edge first算法的全局流量平衡机制（GTB）。首先优化了划分有线无线数据包的机制,减少了无线节点处的拥塞;其次根据无线路由器（WR）的拥塞情况,提出Edge first路由算法平衡子网内的流量;最后在全局网络中提出了全局子网拥塞感知（GSCA）判断机制,使得长距离数据包优先从低拥塞子网通过,平衡了全局网络的流量。实验表明,该方案在可接受的硬件开销、功耗开销下,保证较低的网络延迟和较高的网络吞吐率,并且大幅的提升了网络的流量平衡性能。     

750 kV自耦变压器单相绕组对地电压不平衡的新型补偿方法研究

针对750 kV自耦变压器接入电力网后输出端三相电压不平衡的问题,在研究计算单相自耦变压器各绕组间及绕组对地电容的基础上,将计算结果代入对应的给定单相补偿电容表达式,得到含有不平衡系数的补偿电容值;给定不平衡系数的初值和定迭代步长,进行迭代计算;计算收敛判据,决定是否继续迭代,若满足收敛要求则停止迭代,确定补偿相别以及相应的补偿电容值。实例分析结果表明,所提出的新型补偿法能够快速确定出解决自耦变压器低压绕组对地电压不平衡的单相电容补偿方案和补偿电容值,极大提高了现场解决电压不平衡的速度和可靠性,具有广泛的实用性。     

Genome-Wide Analysis of the Late Embryogenesis Abundant (LEA) and Abscisic Acid-, Stress-, and Ripening-Induced (ASR) Gene Superfamily from Canavalia rosea and Their Roles in Salinity/Alkaline and Drought Tolerance

Canavalia rosea (bay bean), distributing in coastal areas or islands in tropical and subtropical regions, is an extremophile halophyte with good adaptability to seawater and drought. Late embryogenesis abundant (LEA) proteins typically accumulate in response to various abiotic stresses, including dehydration, salinity, high temperature, and cold, or during the late stage of seed development. Abscisic acid-, stress-, and ripening-induced (ASR) genes are stress and developmentally regulated plant-specific genes. In this study, we reported the first comprehensive survey of the LEA and ASR gene superfamily in C. rosea. A total of 84 CrLEAs and three CrASRs were identified in C. rosea and classified into nine groups. All CrLEAs and CrASRs harbored the conserved motif for their family proteins. Our results revealed that the CrLEA genes were widely distributed in different chromosomes, and all of the CrLEA/CrASR genes showed wide expression features in different tissues in C. rosea plants. Additionally, we introduced 10 genes from different groups into yeast to assess the functions of the CrLEAs/CrASRs. These results contribute to our understanding of LEA/ASR genes from halophytes and provide robust candidate genes for functional investigations in plant species adapted to extreme environments.     

负荷功率模型的最优特征选择研究

负荷功率呈现时空多样的变化特性,其影响因素众多,构建负荷功率模型的关键之一是确定模型的输入特征量。文中着重研究短期负荷功率模型的特征选择,旨在从历史负荷、气象、日期等众多特征中选出最优特征集。首先,采用最大信息系数、基于支持向量机的递归特征消除法和随机森林3种不同特征选择方法分别对输入特征集进行选择;然后,根据对比分析结果提出基于遗传算法的最优特征集搜索策略,选定XGBoost预测模型的误差指标作为适应性函数进行迭代优化搜索;最终,确定负荷功率模型的最优特征输入集。采用某地区220 kV变电站母线负荷数据进行算例分析,对比各方法所选特征集作为功率模型输入得到的负荷预测效果,验证了文中方法的有效性和准确性。     

A Facile Approach toward Thermoplastic Triple-Shape Memory Polymers

In this work, a ternary blend of polyolefin elastomer (POE), lauric acid (LA), and poly(ε-caprolactone) (PCL) with triple-shape memory effect (triple-SME) is reported. LA and PCL exhibit distinct thermal transitions and construct two reversible switching networks capable of fixing and releasing different temporary shapes under a mild condition. The ternary blend shows excellent triple-shape memory properties and good toughness. Besides, the permanent shape can be reconfigured by a simple thermal treatment. These particular features make the novel blend a competitive candidate for diverse applications. And the creative combination of crystalline small molecule and semicrystalline polymer expands the freedom for producing triple-shape memory polymers (triple-SMPs).     

A Dual Physical Cross-Linking Strategy to Construct Tough Hydrogels with High Strength,Excellent Fatigue Resistance,and Stretching-Induced Strengthening Effect

Hydrogels with excellent stiffness, toughness, anti-fatigue, and self-recovery properties are regarded as promising water-containing materials. In this work, a dual physically cross-linked (DPC) sodium alginate (SA)/poly[acrylamide (AAm)-acrylic acid (AAc)-octadecyl methacrylate (OMA)]-Fe³⁺ hydrogel is reported, which is constructed by hydrophobic association (HA) and ionic coordination (IC). The optimal DPC hydrogel demonstrates excellent mechanical performance: tensile modulus of 0.65 MPa, tensile strength of 3.31 MPa, elongation at break of 1547%, and toughness of 27.8 MJ m^–3. SA/P(AAm-AAc-OMA)-Fe³⁺ DPC hydrogels also exhibit prominent anti-fatigue and self-recovery performance (99.1–109.7% modulus recovery and 90.4–108.9% dissipated energy recovery after resting for 5 min without additional stimuli at ambient temperature) through the reconstruction of reversible physical cross-linking. Some of the SA/P(AAm-AAc-OMA)-Fe³⁺ DPC hydrogels even exhibit a stretching-induced strengthening effect, which is similar to the performance of muscle—“the more training, the more strength.” Hence, the combination of HA and IC will provide an effective approach to design DPC hydrogels with desirable mechanical performances and a longer service life for wider applications of soft materials.     

Natural Polysaccharides as Multifunctional Components for One-Step 3D Printing Tough Hydrogels

Natural polysaccharides (NPS) are regarded as biomolecular and structural components for preparing high-performance tough hydrogels. But the one-step fabrication of NPS-containing hydrogels in seconds and the template-free design of complicated high-resolution structures are still significant challenges in this field. To meet these requirements, various NPS-containing tough hydrogels are fabricated and processed into 2D/3D structures via the combination of Ru(bpy)₃²⁺-mediated photochemistry and extrusion 3D printing technique. The whole fabrication process is one-step, completed in tens of seconds under visible light irradiation. It is found that the used NPS plays a key role in achieving the fabrication of high-performance structured tough hydrogels. The high reactivity of functional groups in the used NPS can shorten their gelation times. Long rigid chains of the used NPS, their hierarchical assemblies, and contrasting multinetworks benefit from the efficient dissipation of mechanical energy and enhancement of its operational stability. Strong supramolecular interactions enable hydrogel precursors to have high viscosities, therefore providing good controllability to design high-resolution and complicated tough hydrogel structures via extrusion 3D printing. It is anticipated that this straightforward fabrication strategy and findings will open new horizons for NPS-containing materials.     

Supplementation with Docosahexaenoic Acid and Vitamin E Improves Hepatic Triglyceride Accumulation Induced by High-Fat Diet in Mice

The study aims to investigate the effect of combined supplementation with docosahexaenoic acid (C22:6 n-3, DHA) and vitamin E (VE) on the oxidative stress and liver triglycerides (TG) accumulation induced by high-fat diet (HFD) in mice. C57BL/6J mice are fed either a control diet or an HFD for 8 weeks. Animals are supplemented with DHA, VE, or DHA + VE, respectively. Supplementation with DHA alone shows significant improvement in oxidative stress and hepatic steatosis in mice. Supplementation with DHA significantly reduces the liver TG and total cholesterol contents, and the alanine aminotransferase (ALT) and aspartate aminotransferase (AST) levels, compared with the HFD. Supplementation with DHA also significantly decreases the mRNA expression level of sterol regulatory element-binding protein 1C. However, supplementation with VE alone does not show improvement in oxidative stress and hepatic steatosis. DHA + VE supply obtains a superior effect in alleviation of hepatic steatosis than DHA supplementation alone in mice fed by HFD. The efficacy of DHA potentiated by VE can be due to that VE enhances the effect of DHA in decrease of ALT and AST levels and increase of antioxidant enzyme activity and glutathione level in mice fed by HFD. Practical Applications: Supplementation with DHA significantly improves the oxidative stress and hepatic steatosis induced by HFD in mice. The efficacy of DHA in the alleviation of hepatic steatosis induced by HFD is potentiated by VE. These findings may provide a rational basis for the use of DHA and VE co-supplementation in patients with liver steatosis.