Amine Coordinated Electron-Rich Palladium Nanoparticles for Electrochemical Hydrogenation of Benzaldehyde

Electrocatalytic hydrogenation (ECH) is a burgeoning strategy for the sustainable utilization of hydrogen. However, how to effectively suppress the competitive hydrogen evolution reaction (HER) is a big challenge to ECH catalysis. In this study, amine (NH₂ R)-coordinated Pd nanoparticles loaded on carbon felt (Pd@CF) as a catalyst is successfully synthesized by a one-step solvothermal reduction method using oleylamine as the reducing agent. An exceptional ECH reactivity on benzaldehyde is achieved on the optimal Pd@CF catalyst in terms of a high conversion (89.7%) and selectivity toward benzyl alcohol (89.8%) at −0.4 V in 60 min. Notably, the Faradaic efficiency for producing benzyl alcohol is up to 90.2%, much higher than that catalyzed by Pd@CF-without N-group (41.1%) and thecommercial Pd/C (20.9%). The excellent ECH performance of Pd@CF can be attributed to the enriched electrons on Pd surface resulted from the introduction of NH₂ R groups, which strengthens both the adsorption of benzaldehyde and the adsorbed hydrogen (H_ads) on Pd, preventing the combination of H_ads to form H₂, that is, inhibiting the HER. This study gives a new insight into design principles of highly efficient electrocatalysts for the hydrogenation of unsaturated aldehydes molecules.     

Thermally Responsive Fibers for Versatile Thermoactivated Protective Fabrics

Smart textiles with good mechanical adaptability play an important role in personal protection, health monitoring, and aerospace applications. However, most of the reported thermally responsive polymers has long response time and poor processability, comfort, and wearability. Skin-core structures of thermally responsive fibers with multiple commercial fiber cores and temperature-responsive hydrogel skins are designed and fabricated, which exhibit rapid mechanical adaptability, good thermohardening, and thermal insulation. This universal method enables tight bonding between various commercial fiber cores and hydrogel skins via specific covalently anchored networks. At room temperature, prepared fibers show softness, flexibility, and skin compatibility similar to those of ordinary fibers. As temperature rises, smart fibers become hard, rigid, and self-supporting. The modulus of hydrogel skin increases from 304% to 30883%, showing good mechanoadaptability and impact resistance owing to the synergy between hydrophobic interactions and ionic bonding. Moreover, this synergistic effect leads to an increase in heat absorption, and fibers exhibit good thermal insulation, which reduces the contact temperature of the body surface by ≈25 °C under the external temperature of 95 °C, effectively preventing thermal burns. Notably, the active mechanoadaptability of these smart fibers using conductive fibers as cores is demonstrated. This study provides feasibility for fabricating environmentally adaptive intelligent textiles.     

A 2.20 eV Bandgap Polymer Donor for Efficient Colorful Semitransparent Organic Solar Cells

Semitransparent organic solar cells (ST-OSCs) have attracted increasing attention due to their promising prospect in building-integrated photovoltaics. Generally, efficient ST-OSCs with good average visible transmittance (AVT) can be realized by developing active layer materials with light absorption far from the visible light range. Herein, the development of ultrawide bandgap polymer donors with near-ultraviolet absorption, paired with near-infrared acceptors, is proposed to achieve high-performance ST-OSCs. The key points for the design of ultrawide bandgap polymers include constructing donor–donor type conjugated skeleton, suppressing the quinoidal resonance effect, and minimizing the twist of conjugated skeleton via noncovalent conformational locks. As a proof of concept, a polymer named PBOF with an optical bandgap of 2.20 eV is synthesized, which exhibited largely reduced overlap with the human eye photopic response spectrum and afforded a power conversion efficiency (PCE) of 16.40% in opaque device. As a result, ST-OSCs with a PCE over 10% and an AVT over 30% are achieved without optical modulation. Moreover, colorful ST-OSCs with visual aesthetics can be achieved by tuning the donor/acceptor weight ratio in active layer benefiting from the ultrawide bandgap nature of PBOF. This study demonstrates the great potential of ultrawide bandgap polymers for efficient colorful ST-OSCs.     

Stabilization of uncertain networked control systems with actuator saturation and probabilistic cyberattacks

This paper investigates the stabilization of uncertain networked control systems (NCSs) with actuator saturation and cyberattacks. The cyberattacks are governed by a set of independent random variables satisfying Bernoulli distribution. To relieve the network bandwidth load effectively, an event-triggered communication strategy is proposed. By employing Lyapunov stability theory and stochastic analysis techniques, a stability criterion is obtained for the system with actuator saturation and cyberattacks. Moreover, the desired controller gain is derived by solving some matrix inequalities. Finally, the validity and applicability of the criteria are verified through numerical examples.     

小河嘴水电站增效扩容改造电气设备分析

小河嘴水电站已运行四十多年,设备老化,故障多,自动化水平低,对该站进行增效扩容改造是必要的,而且也是可行的。     

Graphene oxide-decorated Fe<Subscript>2</Subscript>(MoO<Subscript>4</Subscript>)<Subscript>3</Subscript> microflowers as a promising anode for lithium and sodium storage

Mixed transition metal oxides (MTMOs) have received intensive attention as promising anode materials for lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs). In this work, we demonstrate a facile one-step water-bath method for the preparation of graphene oxide (GO) decorated Fe₂(MoO₄)₃ (FMO) microflower composite (FMO/GO), in which the FMO is constructed by numerous nanosheets. The resulting FMO/GO exhibits excellent electrochemical performances in both LIBs and SIBs. As the anode material for LIBs, the FMO/GO delivers a high capacity of 1,220 mAh·g^–1 at 200 mA·g^–1 after 50 cycles and a capacity of 685 mAh·g^–1 at a high current density of 10 A·g^–1. As the anode material for SIBs, the FMO/GO shows an initial discharge capacity of 571 mAh·g^–1 at 100 mA·g^–1, maintaining a discharge capacity of 307 mAh·g^–1 after 100 cycles. The promising performance is attributed to the good electrical transport from the intimate contact between FMO and graphene oxide. This work indicates that the FMO/GO composite is a promising anode for high-performance lithium and sodium storage.

Open image in new window

     

卷积积分和拉普拉斯变换在一阶电路中的应用

电路的任意激励的零状态响应,可以用卷积积分和拉普拉斯交换的方法求解。本文通过两个一阶电路的实例,阐述了两种方法的应用特点。     

Evaluation of Landsat 8 OLI imagery for unsupervised inland water extraction

The successful launch of the Landsat 8 satellite continues the Earth observation of the Landsat series, which has been taking place for nearly 40 years. With the increase in the band number and the improved spectral range compared with the previous Landsat imagery, it will be possible to expand the application of the new Landsat 8 imagery. The purpose of this study is to explore water extraction based on the new Landsat 8 Operational Land Imager (OLI) imagery. According to the specific inland water conditions (clear water, turbid water, and eutrophic water), a number of highly adaptable water indices are assessed for water extraction using Landsat OLI imagery. The results show that clear water is the easiest to extract among the different types of waterbodies, with the highest average accuracy of 97%. The highest-accuracy methods are the automated water extraction index for shadow pixels (AWEI_sh), the normalized difference water index using bands 4 and 7 (NDWI₄₇), and the normalized difference water index using bands 3 and 7 (NDWI₃₇), with accuracies of 98.55%, 95.50%, and 96.61%, corresponding to clear water, turbid water, and eutrophic water, respectively. Through the analysis of the different methods for optimal band selection, the seventh band OLI7 (shortwave infrared 2, SWIR-2) of Landsat OLI shows the best performance in water identification. When applying the water indices to water extraction, Otsu’s algorithm has been used to automatically select the water threshold. Using extensive experiments with Otsu’s algorithm and a manual method, it was found that Otsu’s algorithm can replace manual selection and has the ability to select an accurate threshold for water extraction.