Joint Classification and Regression for Visual Tracking with Fully Convolutional Siamese Networks

International Journal of Computer Vision - Visual tracking of generic objects is one of the fundamental but challenging problems in computer vision. Here, we propose a novel fully convolutional...     

Monolithically integrated CoP nanowire array: An on/off switch for effective on-demand hydrogen generation via hydrolysis of NaBH<Subscript>4</Subscript> and NH<Subscript>3</Subscript>BH<Subscript>3</Subscript>

The issues of hydrogen generation and storage have hindered the widespread use and commercialization of hydrogen fuel cell vehicles.It is thus highly attractive,but the design and development of highly active non-noble-metal catalysts for on-demand hydrogen release from alkaline NaBH4 solution under mild conditions remains a key challenge.Herein,we describe the use of CoP nanowire array integrated on a Ti mesh (CoP NA/Ti) as a three-dimensional (3D) monolithic catalyst for efficient hydrolytic dehydrogenation of NaBH4 in basic solutions.The CoP NA/Ti works as an on/off switch for on-demand hydrogen generation at a rate of 6,500 mL/(min.g) and a low activation energy of 41 kJ/mol.It is highly robust for repeated usage after recycling,without sacrificing catalytic performance.Remarkably,this catalyst also performs efficiently for the hydrolysis of NH3BH3.     

小河嘴水电站增效扩容改造电气设备分析

小河嘴水电站已运行四十多年,设备老化,故障多,自动化水平低,对该站进行增效扩容改造是必要的,而且也是可行的。     

Graphene oxide-decorated Fe<Subscript>2</Subscript>(MoO<Subscript>4</Subscript>)<Subscript>3</Subscript> microflowers as a promising anode for lithium and sodium storage

Mixed transition metal oxides (MTMOs) have received intensive attention as promising anode materials for lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs). In this work, we demonstrate a facile one-step water-bath method for the preparation of graphene oxide (GO) decorated Fe₂(MoO₄)₃ (FMO) microflower composite (FMO/GO), in which the FMO is constructed by numerous nanosheets. The resulting FMO/GO exhibits excellent electrochemical performances in both LIBs and SIBs. As the anode material for LIBs, the FMO/GO delivers a high capacity of 1,220 mAh·g^–1 at 200 mA·g^–1 after 50 cycles and a capacity of 685 mAh·g^–1 at a high current density of 10 A·g^–1. As the anode material for SIBs, the FMO/GO shows an initial discharge capacity of 571 mAh·g^–1 at 100 mA·g^–1, maintaining a discharge capacity of 307 mAh·g^–1 after 100 cycles. The promising performance is attributed to the good electrical transport from the intimate contact between FMO and graphene oxide. This work indicates that the FMO/GO composite is a promising anode for high-performance lithium and sodium storage.

Open image in new window

     

卷积积分和拉普拉斯变换在一阶电路中的应用

电路的任意激励的零状态响应,可以用卷积积分和拉普拉斯交换的方法求解。本文通过两个一阶电路的实例,阐述了两种方法的应用特点。     

Molecular dynamics simulation on flow behavior of nanofluids between flat plates under shear flow condition

Molecular dynamic model of nanofluid between flat plates under shear flow conditions was built. The nanofluid model consisted of 12 spherical copper nanoparticles with each particle diameter of 4 nm and argon atoms as base liquid. The Lennard–Jones (LJ) potential function was adopted to deal with the interactions between atoms. Thus, the motion states of nanoparticles during the process of flowing were obtained and the flow behaviors of nanofluid between flat plates at different moments could be analyzed. The simulation results showed that an absorption layer of argon atoms existed surrounding each nanoparticle and would accompany with the particle to move. The absorption layer contributed little to the flow of nanoparticles but much to the heat transferring in nanofluids. Another phenomenon observed during shear flowing process was that the nanoparticles would vibrate and rotate besides main flowing with liquid argon and these micro-motions could strengthen partial flowing in nanofluids.     

Evaluation of Landsat 8 OLI imagery for unsupervised inland water extraction

The successful launch of the Landsat 8 satellite continues the Earth observation of the Landsat series, which has been taking place for nearly 40 years. With the increase in the band number and the improved spectral range compared with the previous Landsat imagery, it will be possible to expand the application of the new Landsat 8 imagery. The purpose of this study is to explore water extraction based on the new Landsat 8 Operational Land Imager (OLI) imagery. According to the specific inland water conditions (clear water, turbid water, and eutrophic water), a number of highly adaptable water indices are assessed for water extraction using Landsat OLI imagery. The results show that clear water is the easiest to extract among the different types of waterbodies, with the highest average accuracy of 97%. The highest-accuracy methods are the automated water extraction index for shadow pixels (AWEI_sh), the normalized difference water index using bands 4 and 7 (NDWI₄₇), and the normalized difference water index using bands 3 and 7 (NDWI₃₇), with accuracies of 98.55%, 95.50%, and 96.61%, corresponding to clear water, turbid water, and eutrophic water, respectively. Through the analysis of the different methods for optimal band selection, the seventh band OLI7 (shortwave infrared 2, SWIR-2) of Landsat OLI shows the best performance in water identification. When applying the water indices to water extraction, Otsu’s algorithm has been used to automatically select the water threshold. Using extensive experiments with Otsu’s algorithm and a manual method, it was found that Otsu’s algorithm can replace manual selection and has the ability to select an accurate threshold for water extraction.     

Reversible data hiding in encrypted images based on multi-level encryption and block histogram modification

Multimedia Tools and Applications - In recent years there has been significant interest in reversible data hiding, and also in particular, reversible data hiding in encrypted images (RDH-EI). This...