煤矿生产、安全调度LED电子大屏幕显示系统的设计

通过比较煤矿生产、安全调度显示方式的优缺点，提出和分析了适合于煤矿生产安全调度的ＬＥＤ电子大屏幕显示系统配置、功能及特点。     

In Situ ceramic particle-reinforced aluminum matrix composites fabricated by reaction pressing in the TiO2 (Ti)-Al-B (B2O3) systems

Particulate TiB₂ reinforced aluminum-based metal matrix composites (MMCs) were successfully fabricated by means of the reaction processing method. TiB₂ particulates were formed in situ through the reaction of Ti and B in Ti-Al-B, TiO₂ and B in TiO₂-Al-B, and TiO₂ and B₂O₃ in TiO₂-Al-B₂O₃ systems. The results showed that in situ TiB₂ particulates formed in the Ti-Al-B system had a size of 5 μm and they exhibited block and rodlike structures. Moreover, coarse Al₃Ti blocks several tens of micrometers in size were also formed simultaneously. On the other hand, equiaxed Al₂O₃ and TiB₂ particulates with a size of less than 2 μm were formed in situ in the TiO₂-Al-B and TiO₂-Al-B₂O₃ systems. The Al₃Ti phase was completely eliminated in the TiO₂-Al-B system with increasing B content. Tensile tests revealed that the Al₂O₃ · TiB₂/Al composite fabricated from the TiO₂-Al-B system exhibits excellent mechanical properties. The yield strength of the Al₂O₃ · TiB₂/Al composite appeared to increase with increasing TiB₂ content. The yield strength of the Al₂O₃ · TiB₂/Al composite could be further increased by introducing CuO into the TiO₂-Al-B system. Such an increment in mechanical strength arose from the strengthening effect caused by the Al₂Cu precipitates. The incorporation of CuO had no effect on the in situ reaction process of the TiO₂-Al-B system. Finally, the effect of SiC addition on the microstructure and mechanical properties of the composites fabricated from the TiO₂-Al-B and TiO₂-Al-B-CuO systems was also investigated.     

深亚微米MOSFET衬底电流的模拟与分析

利用器件模拟手段对深亚微米ＭＯＳＦＥＴ的衬底电流进行了研究和分析，给出了有效的道长度，栅氧厚度，源漏结深，衬底掺杂浓度以及电源电压对深亚微米ＭＯＳＦＥＴ衬底电流的影响，发现电源电压对深亚微米ＭＯＳＦＥＴ的衬底电流有着强烈的影响，热载流子效应随电源电压的降低而迅速减小，当电源电压降低到一定程度时，热载流子效应不再成为影响深亚微米ＭＯＳ电路可靠性的主要问题。     

Control of peak sidelobe level in adaptive arrays

Adaptive beamforming techniques are now widely used to reject interference (jammer/clutter) signals in radar, communication, and sonar applications. In adaptive arrays using the sample matrix inversion (SMI) algorithm, inadequate estimation of the covariance matrix results in adaptive antenna patterns with high sidelobes and distorted mainbeams. In this paper, a method is proposed to precisely control the peak (rather than average) sidelobe level of adaptive array patterns. The proposed method is also generalized to adaptive array antennas with moderate bandwidth and large random amplitude and phase errors. Theoretical analysis and simulation results are provided to illustrate the performance of the method proposed     

测评软件生成系统的设计与实现

本文讨论了一个具有通用性的测试评估软件生成系统的设计思想和实现方法，给出了该生成器的系统组成、数据组织结构、查询搜索方式以及用户界面的设计。该系统具广泛的应用领域和实用意义。     

E-kernel: an embedding kernel on the IBM victor V256 multiprocessorfor program mapping and network reconfiguration

We present the design of E-kernel, an embedding kernel on the Victor V256 message-passing partitionable multiprocessor, developed for the support of program mapping and network reconfiguration. E-kernel supports the embedding of a new network topology onto Victor's 2D mesh and also the embedding of a task graph onto the 2D mesh network or the reconfigured network. In the current implementation, the reconfigured network can be a line or an even-size ring, and the task graphs meshes or tori of a variety of dimensions and shapes or graphs with similar topologies. For application programs having these task graph topologies and that are designed according to the communication model of E-kernel, they can be run without any change on partitions connected by the 2D mesh, line, or ring. Further, E-kernel attempts the communication optimization of these programs on the different networks automatically, thus making both the network topology and the communication optimization attempt completely transparent to the application programs. Many of the embeddings used in E-kernel are optimal or asymptotically optimal (with respect to minimum dilation cost). The implementation of E-kernel translated some of the many theoretical results in graph embeddings into practical tools for program mapping and network reconfiguration in a parallel system. E-kernel is functional on Victor V256. Measurements of E-kernel's performance on V256 are also included     

子波变换理论及其在信号处理中的应用

子波分析的形成是傅里叶分析发展史上里程碑式的进展，子波分析优于傅里叶交换的地方在于它在时域和频域同时具有良好的局部化性质，从而可以把分析的重点聚焦到任意的细节，被人们誉为数学显微镜，成为近年来在工具和方法上的重大突破。本文将子波理论中的主要定理、结论、变换特性和一些重要概念加以综述，以促进子波理论的应用。本文的重点在于介绍多分辨率分析和子波分析及其实现、子波变换及其算法、子波和滤波器组等的重要内容，并介绍其在信号处理中的应用及研究动态。     

预处理工艺对硬质合金与金刚石膜间粘结力的影响

在两种经不同预处理的硬质合金YG8基底上，采用微波等离子体化学气相沉积法，在微波功率2kW，压强4.0kPa和6.5kPa，CH4和H2流量分别为1.6cm/s和100.0cm/s的条件下生长金刚石薄膜。利用X射线衍射检测了金刚石薄膜是否存在，用拉曼光谱分析了薄膜的质量，用金相显微镜观察了薄膜的洛氏硬度压痕，标定并比较了不同预处理工艺膜与基底的结合力。实验结果表明，不同的预处理方法对于粘结力的影响不大，最主要的因素是钴含量的多少。     

孤岛油田西区聚合物驱开发研究

孤岛油田西区注聚区1997年3月投入注聚后，高渗层得到有效封堵，吸水剖面得到明显改善。注聚期间，通过实施注聚区外围水井降水或停注、油井放大生产压差和调整注聚井注入速度等开发措施，扩大了聚合物波及体积，聚合物驱取得了明显效果。     

提高催化裂化柴油和液化气收率的方法及措施

介绍了利用现有的催化裂化装置 ,通过优化操作及运用MGD技术提高柴油和液化气收率的方法和技术措施。