自适应比例因子模糊控制器在异步电动机调速系统中的应用

为了降低转子电阻变化对异步电动机矢量控制系统性能的影响，本文把自适应比例因子模糊控制器应用到了矢量控制系统中。介绍了自适应比例因子模糊控制方法的綦本原理，给出了使用自适应比例因子模糊控制器的异步电动机矢量控制系统的结构框图，对主模糊控制器和辅助模糊控制器进行了设计。仿真实验结果表明，采用这种控制方法的调速系统不仅具有优良的动态性能，而且对转子电阻变化具有很强的鲁棒性。     

2#板坯连铸机振动台故障分析及改造

论述了银山型钢有限公司炼钢厂2#板坯连铸机自投产以来其振动台存在的问题，根据实际情况分析论证并进行改造实施，实施后效果明显。     

En/Decoder for Spectral Phase-Coded OCDMA System Based on Amplitude Sampled FBG

A novel en/decoder for spectral phase-coded optical code-division multiple-access system based on amplitude sampled fiber Bragg grating (FBG) is proposed. Both equivalent chirp and equivalent phase shift are achieved by amplitude sampling. Compared with previous en/decoder based on step chirped FBG, it is easier to fabricate. The performance of the proposed en/decoder is verified by both numerical simulation and experimental demonstration.     

Geotechnical properties of the soft soil in Guangzhou College City

The paper describes some geotechnical properties of the soft soils in Guangzhou College City, China, which are difficult to both sample and test. Laboratory and in situ tests were carried out to assess the physical and mechanical indices of the soils. The data were statistically analyzed and linear regression undertaken such that equations could be developed by which the geotechnical properties of the soft soils can be predicted. The statistical validity of the degree of correlation confirmed that using these equations, the mechanical indices can be estimated from physical indices determined by routine testing.      

Novel blood-compatible waterborne polyurethane using chitosan as an extender

A series of novel block polymers of polyurethane (PU) and chitosan have been prepared in two steps. The first step is the preparation of PU prepolymer, obtained from polytetramethylene oxide glycol (PTMO, M_n = 1000), isophrone diisocyanate (IPDI), and 2,2′-dimethylol propionic acid (DMPA), followed by ionizing PU prepolymer with triethylamine (TEA). The second step involves PU chain-extended by water-soluble chitosan of low molecular weight (M_n = 5000) by self-emulsion polymerization method. The sizes of the latex particles, morphology, and copolymer architecture have been characterized by dynamic light scattering (DLS), general tensile test, infrared spectroscopy (IR), surface contact angle measurement, and transmission electron microscopy (TEM). Furthermore, it shows that the addition of chitosan remarkably increases anticoagulative property of PU elastomers confirmed by the recalcification time. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

漫谈钛合金在舰船上的应用

钛合金优良的耐海水腐蚀性能、高的比强度、无磁性等特点,使其在船用领域大有潜力可为,我国的船用钛合金经过近40年的研究开发,基本能满足舰艇不同强度级别的需求,在舰船上应用具有明显的社会效益和经济效益,值得进一步应用推广。本文介绍了国内外舰船用钛合金的开发及应用情况。对钛合金在鱼雷发射水缸、高压气瓶、一回路危急冷却器、声扫雷具、二回路泵、阀及管系、声纳导流罩、螺旋桨等方面的应用作了重点介绍。     

Metal micromolding: further experiments and preliminary finite element analysis

We report results of instrumented microscale compression molding experiments on Al with Ta mold inserts. The Ta inserts have high-aspect-ratio microscale structures fabricated by micro-electrical-discharge-machining. These microscale structures were further surface engineered by electrochemical polishing, followed by deposition of a conformal amorphous hydrogenated carbon based coating. The molding response of Al, in terms of molding force versus insert displacement, was measured in situ with a high-vacuum, instrumented, compression molding apparatus, and rationalized with a simple model on the mechanics of molding. Molding response was further studied numerically through finite element analysis.     

高功率激光系统通过空间滤波和中继成像抑制自聚焦

讨论了由光束自聚焦引起的细丝形成和光束分裂，为了克服聚焦造成的破坏要求在光束传播中采用中继成像和空间滤波。     

LD泵浦Nd：YVO4内腔倍频激光器获得120mW绿光连续输出

利用半导体激光器（ＬＤ）端面泵浦Ｎｄ：ＹＶＯ＿４和用ＫＴＰ内腔倍频的绿激光器获得了１２０ｍＷ连续、稳定的５３２ｎｍ绿激光输出。泵浦阈值Ｐ＿（ｔｈ）＝１６０ｍＷ，光－光转换效率η＿ｓ＝８．１％。换用激光腔输出耦合镜，在不加ＫＴＰ晶体倍频时，可连续输出１．０６μｍ的红外激光，输出功率为４５０ｍＷ，光－光转换效率为３１％。     

组合式光纤流量传感器

提出了一种新型的组合式光纤流量传感器，介绍了它的工作原理，详细讨论了光脉冲转换器的设计要点，据此设计了传感头，并给出了它的实验结果。