位错芯重构缺陷对于Si中位错运动的影响

为了研究晶格常数不匹配的异质结SiGe/Si生长过程中低温缓冲层内缺陷对位错运动的影响,使用位错偶极子模型在Si晶体内建立了一对30°部分位错,和导致30°部分位错运动的弯结结构,以及位错芯重构缺陷(RD)与弯结组合而生成的弯结-RD结构.通过分子动力学模拟,使用Parrnello-Rahmman方法施加剪应力促使位错运动,得到了左右弯结-RD结构在迁移过程中的8种稳定构型,并且使用NEB方法和紧束缚势计算了纯弯结和弯结-RD迁移过程中势垒高度,发现弯结-RD的迁移能力要高于纯弯结结构.从模拟结果推断出,低温层生长技术中的Si低温缓冲层由于低温限制了重构缺陷的运动,减少其相遇发生湮灭的概率,从而使得更多的弯结能够与重构缺陷结合生成弯结-RD结构来提高30°部分位错的运动能力,由此释放异质结结构失配应力所需的位错密度会随之减小.     

Preparation and characterization of polyurethane microcapsules containing n‐octadecane with styrene‐maleic anhydride as a surfactant by interfacial polycondensation

A series of polyurethane microcapsules containing a phase change material (PCM) of n‐octadecane was successfully synthesized by an interfacial polymerization in aqueous styrene‐maleic anhydride (SMA) dispersion with diethylene triamine (DETA) as a chain extender reacting with toluene‐2,4‐diisocyanate (TDI). The average diameter of microPCMs is in the range of 5–10 μm under the stirring speed of 3000–4000 rpm. Optical and SEM morphologies of microPCMs had ensured that the shell was regularly fabricated with the influence of SMA. FTIR results confirmed that the shell material was polyurethane and the SMA chains associated on core material reacted with TDI forming a part of shell material. The shell thickness was decreasing in the range of 0.31–0.55 μm with the molar ratio of DETA/TDI from 0.84 to 1.35 and the weight of core material increasing from 40 to 80% (wt %). By controlling the weight ratio of PCM as 40, 50, 60, 70, and 80% in microPCMs, it was found using DSC that the T_m and T_c of microPCMs were in the range of 29.8–31.0^oC and 21.1–22.0°C and an obvious phase change had been achieved nearly the same temperature range of that of PCM. The results from release curves of microPCM samples prepared by 1.4, 1.7, and 2.0 g of SMA indicated the release properties were affected by the amount of the dispersant, which attributed to the emulsion effect and shell polymerization structure. The above results suggest that the shell structure of microPCMs can be controlled and the properties of microPCMs determined by shell will perform proper practical usage. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4996–5006, 2006     

一套常减压装置适应性改造HSE动态调查

运用危险性分析和工作危害分析法,对一套常减压装置适应性改造的危险性进行分析, 找出主要影响因素,制订对策,确保装置改造和生产安全。     

YAG：Ce Phosphors for WLED via Nano-Pesudoboehmite Sol-Gel Route

The sub-micron sized YAG ： Ce phosphors were synthesized via a modified sol-gel method by peptizing nano-pesudoboehmite particulate. It is found that YAG phase from the dried gel powders appears at 1000 ℃ then the pure YAG phase exists at a relatively lower sintering temperature of 1400 ℃. The smaller sizes of phosphors in the ranges of 1 - 3 μm are obtained due to the contribution of seeding effects of nano-sized alumina particles to strengthen each step of the processes. Both the excitation and emission spectra of photoluminescence of the phosphor obtained at 1400 ℃ meet well with the spectroscopic requirements of the WLED phosphors.     

具有复合埋层的新型SIMON材料的制备

采用氮氧共注入方法制备了新型的 SIMON(separation by implanted oxygen and nitrogen) SOI材料 .采用不同的制备方法分别制作出样品并进行了结构测试和分析 ,发现 SIMON材料的结构和质量对注入条件和退火工艺非常敏感 .并对各种氮氧复合注入技术做了分析和比较 ,发现氮氧分次注入可以得到更好的结构和性能     

管理信息系统建设中数据库的系统设计与管理

提出用系统的观念分类和管理数据库，挖掘数据库在管理信息系统建设中的潜在能力。     

通用USB接口设备控制器的研究

简要介绍了USB技术的发展与现状；详细论述了USB系统的硬件结构；深入研究了USB系统的特点；探讨了USB系统目前仍在的问题。     

基于熵权的料场方案模糊多属性优选研究

砂石料场方案选择中存在着许多难以精确度量的模糊性因素，常规的平衡法、系统分析法很难对此进行有效的处理。将模糊数学理论应用于砂石料场的方案选择，提出了熵权与模糊理论相结合的砂石料场方案优选方法，重点对标准化属性矩阵的产生、主客观权重结合得到综合权重及相对接近度的计算等几个方面进行了说明，并通过实例验证了该方法的可行性与实用性。     

微波等离子体化学气相沉积的 a-Si∶H 性能研究

本文着重对微波等离子体化学气相沉积法高速沉积的 a-Si∶H 膜的物理性能进行评价研究.测量了沉积膜的光电性能、暗电导激活能、光禁带宽度、光吸收特性、沉积膜中悬键态密度以及氢含量等,并讨论沉积条件对膜性能的影响.结果表明,在沉积速率高达30～90(?)/s 情况下,膜的光电导(光照强度10~5Lux)与暗电导比值可达10~3～10~5,暗电导率从10~(-3)到10~(-11)((?)cm)~(-1),其激活能在0.23～0.88eV 之间(0～200℃温度范围内),光禁带宽度为1.40～2.20eV,氢含量约为2～20%.     

Improved coupled-mode theory for nonlinear directional couplers

An improved coupled-mode equation for nonlinear directional couplers (NLDC) with Kerr-like nonlinear media is proposed. The method is based on the generalized reciprocity relation in which two sets of field solutions satisfying Maxwell's equations are for the NLDC and for the isolated nonlinear waveguide. That leads to a reasonable result that all the coefficients in the coupled-mode equations, including the coupling coefficient, become power dependent. For the NLDC with a self-focusing or self-defocusing nonlinear material, the authors examine how the coupling coefficient, the coupling length, and the guided power depend on the input power in the range of coupling stronger than in previous reports. It is found that the critical power at which the coupling length becomes infinity does not increase as much with the two guides for the case of self-focusing media