A New Recycled Al–Si–Mg Alloy for Sustainable Structural Die Casting Applications

Metallurgical and Materials Transactions A - The use of secondary aluminum for structural components in the automotive industry is limited by the high Fe contents in recycled alloys which often...     

含硫氰酸盐、硫化物固体废物中总氰化合物测定方法

实验建立了含硫氰酸盐、硫化物固体废物中总氰化合物的测定方法,采用硝酸银滴定法、异烟酸-吡唑啉酮分光光度法分别测定总氰化合物含量高、低的样品。通过条件实验优化了前处理方式、称样量和干扰去除方法。该方法测定结果的相对标准偏差为0.43%～1.33%,加入标准物质回收率为91.5%～101.5%,精密度和准确度良好,符合测定要求。     

含钼废渣冶炼钼铁的优化试验

利用含钼废料钼酸钙为原料,采用碳还原法冶炼钼铁,通过单因素分析试验及正交试验优化得出最佳的试验条件,钼酸钙加入量应低于10%,熔炼温度为1 525 ℃,保温时间为25 min,碱度为1.3。通过XRD、SEM、EDS分析得出用此方法生产得到的钼铁合金中,钼以Mo₂C、Fe₃Mo以及Fe₃Mo₃C的形式存在,渣系为二元玻璃渣系,具有与普通玻璃相似的成分系统。经测定合金中钼的回收率大于99%,钼资源回收效益可观。     

Electrodeposition of catalytically active nickel for the oxygen evolution reaction — effects of anionic composition

Nickel electrodes were prepared by electrodeposition in electrolytes of various anionic compositions. The deposition conditions and bath types were evaluated with special emphasis on the electrocatalytic properties for the oxygen evolution reaction (OER). Electrochemical characterizations in a 5 mol/L KOH solution at 25°C showed that the electrode deposited from the chloride bath, having a low Tafel slope of 50 mV/dec and an overpotential of 396 mV at 100 mA/cm², is the most catalytically active among electrodes prepared in electrolytes of various anionic compositions. The electrode activity for the OER is related to the real surface areas, which depend on the anion compositions in the deposition bath and the deposition conditions.     

高岭土在碳热还原氮化过程中的相变

系统研究了苏州高岭土碳热还原氮化合成SiAlON过程在不同温度下的相变。对试样的XRD、SEM以及EDXA分析结果表明 ,1 30 0℃之前 ,试样中没有氮化物生成 ,物相为莫来石、石英和方石英 ;1 30 0℃时 ,高岭土开始发生氮化反应 ,生成过渡型SiAlON和β SiAlON。此时 ,石英和方石英相基本消失 ;1 4 0 0℃时 ,过渡型SiAlON、β SiAlON和X SiAlON三相共存 ,β SiAlON有所增多并有少量刚玉相生成 ;从 1 4 50℃到 1 550℃ ,Z值为 3的β SiAlON成为惟一的氮化产物 ,与少量SiC和刚玉相并存。莫来石在 1 50 0℃时完全消失     

Electrodeposition of Ni-transition alloys for the oxygen evolution reaction

The oxygen evolution reaction (OER) is the anodic reaction in several industrial electrolytic processes. The objective of this work was to develop a new electrocatalytic material for long-lasting and economical high performance electrodes. New electrodes were prepared by electrodeposition of nickel, nickel-ruthenium and nickel-iridium alloys. They were then activated by anodic polarization at 100 mA cm^–2 to form an oxide layer. The electrocatalytic activity was characterized for the OER in 5M KOH solution. The results show that nickel-iridium alloys provide greater electrocatalytic activity for the OER and better corrosion resistance than nickel-ruthenium in alkaline solution. The effects of transition elements on improving the performance of the nickel electrode are then discussed.Notation b Tafel slope - i _ex exchange current density - i _dp electrodeposition current density - i _OER oxygen evolution reaction current density - C _dl double-layer capacity - o₂ oxygen overpotential     

Feedback nonlinear discrete-time systems

In this paper, we design an adaptive iterative learning control method for a class of high-order nonlinear output feedback discrete-time systems with random initial conditions and iteration-varying desired trajectories. An n-step ahead predictor approach is employed to estimate future outputs. The discrete Nussbaum gain method is incorporated into the control design to deal with unknown control directions. The proposed control algorithm ensures that the tracking error converges to zero asymptotically along the iterative learning axis except for the beginning outputs affected by random initial conditions. A numerical simulation is carried out to demonstrate the efficacy of the presented control laws.     

INS传递对准中挠性杆臂效应建模与仿真

本文针对舰载武器传递对准产生的杆臂效应模型未考虑动态挠曲的情况,根据挠性杆臂效应原理推导出该模型,利用simulink搭建挠曲变形角二阶马尔科夫过程模型,并与非挠性杆臂效应比较,表明动态挠曲引起的加速度误差较大,需要计算补偿。     

基于.NET的飞信远程控制系统

当前无线通信设备价格高昂,而人们对远程控制的兴趣和需求却日益增加。为了实现低成本地使用无线远程控制设备,设计开发了一套基于.NET的飞信远程控制系统。该系统以.NET为开发平台,采用C#作为开发语言,设计了上位机应用程序;由RS-485总线实现多机主从式通信,由SQL数据库技术实现数据的存储和管理,由飞信通信接口技术实现远程无线控制,最终实现远程控制功能。该系统既方便了人们的生活,又提高了工作效率,具有广阔的应用前景。     

一种适用于物联网节点的高效轻量级嵌入式系统设计

物联网技术成为当前一个比较热门的研究主题,但适用于物联网传感器的嵌入式操作系统在国内未被广泛提及。本文针对嵌入式多任务程序设计所面对的问题,结合物联网传感器资源受限、低功耗等特点,探讨该类程序的一般设计方法,提出了一种基于事件驱动抢占式系统的基本实现方法,并使之顺利应用于基于MSP430物联网传感器采集节点的系统中。