江西省都昌县2000年旱情的思考

通过都昌县2000年旱情及受灾情况的分析，揭示了产生这种现象的原因，并且提出了相应解决问题的对策。     

Total transfer capability computation for multi-area power systems

This paper presents a method for multi-area power system total transfer capability (TTC) computation. This computation takes into account the limits on the line flows, bus voltage magnitude, generator reactive power, voltage stability, as well as the loss of line contingencies. The multi-area TTC problem is solved by using a network decomposition approach based on REI-type network equivalents. Each area uses REI equivalents of external areas to compute its TTC via the continuation power flow (CPF). The choice and updating procedure for the continuation parameter employed by the CPF is implemented in a distributed but coordinated manner. The proposed method leads to potential gains in the computational efficiency with limited data exchanges between areas. The developed procedure is successfully applied to the three-area IEEE 118-bus test system. Numerical comparisons between the integrated and the proposed multi-area solutions are presented for validation.     

基于图像灰度统计分布的高炉温度场动态定标算法

通过高炉红外图像建立料面温度场是判断高炉煤气流分布形态的一种有效方法,温度定标是建立温度场的基本问题之一.在高炉复杂、恶劣的环境下,本文以高炉十字测温为基础,通过热电偶温度数据和图像对应区域的灰度分布统计,动态地建立温度定标关系.算法具有较好的自适应性,实际生产运行表明,温度定标关系较好地适应了高炉炉况的不确定性,准确地反映了高炉温度场的变化情况.     

Structure and Magnetic Properties of LaCo_(13-X)M_X Intermetallic Compounds

ＳｔｒｕｃｔｕｒｅａｎｄＭａｇｎｅｔｉｃＰｒｏｐｅｒｔｉｅｓｏｆＬａＣｏ＿（１３－Ｘ）Ｍ＿ＸＩｎｔｅｒｍｅｔａｌｌｉｃＣｏｍｐｏｕｎｄｓＷＵＪｉａｎＭｉｎ；ＬＩＦｅｎｇ；ＴＡＩＬｉＣｈｉａｎｄＺＨＥＭＧＱｕｎＳｔｒｕｃｔｕｒｅａｎｄＭａｇｎｅｔｉｃＰ...     

烷基化原料预加氢工艺应用分析

由于来自催化裂化装置的烷基化原料中所含有的丁二烯在烷基化反应中可生成重质油,使产品干点上升,辛烷值下降,并使酸耗增加.针对这种状况,齐鲁石化公司研究院和胜利炼油厂联合开发了QSH-01烷基化原料预加氢催化剂及其相应的工艺技术,来脱除原料中丁二烯.笔者对该工艺技术及其应用作了阐述,并对该技术的应用前景作出分析.     

二维地震过障碍观测系统模式及其参数设计

在二维地震勘探中,为了避免因地表障碍物使地震反射剖面出现间断现象,需要改变观测系统设计,跨越障碍物(江河、城镇等),以保证反射同相轴能连续追踪对比。在以往地震勘探中,有时因过障碍观测系统设计不合理,不但增加勘探费用,而且影响采集质量。因此只有科学合理地设计过障碍观测系统模式和参数,才能保证地震测线顺利通过障碍物,得到较好的障碍物下方的地震资料并降低勘探成本。为此本文在调查和研究大量野外实际的过障碍观测系统的基础上,总结归纳成三大类过障碍观测系统模式,并分析其特点和应用范围。采用图解法,推导出主要模式的跨越宽度、最小炮检距及最大炮检距等参数公式。采用这套过障碍观测模式不仅可以得到和障碍区两侧等质量的地震资料,而且可以有效地降低勘探成本。     

Patterns of knowledge production: The case of information and telecommunication sector in Korea

In recent years, the topic of knowledge production has been widely investigated in the advanced countries. However, the process by which knowledge is produced in the developing countries has not been fully explored or characterized. In Korea, the science and engineering fields strongly reflect systems of knowledge production in the universities and demonstrate the dynamics of systems of innovation for knowledge production. Through using a case study including data for knowledge production, in the field of information and telecommunication, the following general trends were observed. Firstly, there has been a trend towards increasing the capabilities for knowledge production, via domestic and foreign collaboration. Secondly, there has been an increasing trend towards the diversification of knowledge sources such as university-industry, and university-public research institutes. Finally, the establishment of a nation's knowledge base is influenced by governmental research and development policies. This revised version was published online in August 2006 with corrections to the Cover Date.     

有杆泵抽油系统可靠性分析

抽油机井有杆果采油装置检泵故障数据的特点在于相邻两次检泵间隔之间的时间并非总是来自同一总体，可能有某种趋势的变化。通过对故障数据的趋势性检验，可验证其对某一随机过程模型的适应性，从而判定某一口井或某一批工况大致相同油井的运行可靠性，实现对生产井运行可靠性的定量评估。还通过实例说明了有杆泵抽油系统检泵故障数据的可靠性分析方法。     

Synthesis and properties of polystyrene/graphite nanocomposites

In this paper, graphite/polystyrene nanocomposite is synthesized by in situ polymerization of styrene in a tetrahydrofuran (THF) solution system of potassium (K)-THF-graphite intercalation compound (GIC). K-THF-GIC has proved to initiate polymerization of styrene by the anionic mechanism. Due to the interfacial interaction between the graphite nanolayers and the polymer, the composites exhibit higher glass transition temperature and higher thermal stability when compared to polystyrene. The percolation threshold in the conductivity of the composites is lesser than 8.2 wt% and the dielectric constant can reach as high as 136.