面向共同配送的建模仿真研究

分析了共同配送的工作程序、建模方法及相关算法。采用基于面向对象的结构化的建模分析方法和eM-plant仿真平台,建立了共同配送的仿真模型。将电子地图导入仿真模型,并运用启发式算法自动规划出车辆配送路线,同时考虑各种确定性与不确定性因素对模型的影响。选用实例验证了该仿真方法。     

晶体硅薄膜电池制备技术及研究现状

晶体硅薄膜太阳电池近些年来得到广泛的研究和初步的商业化探索。根据所采用的晶体硅薄膜沉积工艺中温度范围的不同，晶体硅薄膜电池研究可分为高温路线和低温路线两个不同发展方向。本文分别从这两个方向综述了目前国外晶体硅薄膜电池制备技术的最新进展，最新实验室研究结果。报导了晶体硅薄膜电池商业化进展状况，指出了晶体硅薄膜电池实现产业化必须解决的问题。     

Closed-loop optimal control-enabled piezoelectric microforce sensors

This paper presents a closed-loop optimally controlled force-sensing technology with applications in both micromanipulation and microassembly. The microforce-sensing technology in this paper is based on a cantilevered composite beam structure with embedded piezoelectric polyvinylidene fluoride (PVDF) actuating and sensing layers. In this type of sensor, the application of an external load causes deformation within the PVDF sensing layer. This generates a signal that is fed through a linear quadratic regulator (LQR) optimal servoed controller to the PVDF actuating layer. This in turn generates a balancing force to counteract the externally applied load. As a result, a closed feedback loop is formed, which causes the tip of this highly sensitive sensor to remain in its equilibrium position, even in the presence of dynamically applied external loads. The sensor's stiffness is virtually improved as a result of the equilibrium position whenever the control loop is active, thereby enabling accurate motion control of the sensor tip for fine micromanipulation and microassembly. Furthermore, the applied force can be determined in real time through measurement of the balance force.     

雷达仿真系统中电磁干扰环境的仿真设计和实施

雷达仿真系统是为检测雷达设备的抗干扰能力以及在各种电磁环境下的工作性能而设计的，包括有源干扰和无源干扰的模拟仿真。本文阐述了无源干扰即杂波的散射模型和仿真过程；从同步脉冲干扰的基本原理出发，阐明在雷达工作环境仿真系统中距离拖引、速度拖引、虚假目标等同步脉冲有源干扰的设计和实施过程；并针对工作在搜索和跟踪交替模式下的相控阵雷达提出自适应综合干扰方式；最后分析并总结了系统仿真时为真实、有效地模拟电磁干扰环境应注意的关键问题。     

双层堤基的井涌破坏与无害管涌

双层堤基水文地质结构特殊，堤基承压水常具独特的“渗而不流”特征。在“不流”条件下，堤后盖层薄弱处受超高承压水头顶裂破坏，产生的局部冒水孔实属承压自流井，由此形成的管涌实质为井涌。底部进水的承压井流影响范围不大，井涌的破坏范围更小，据此可区分出有害管涌与无害管涌。前者局限于堤脚附近，小范围压渗为首选方案；对后者，既无需专门防治，更不必追求根治。     

1477 nm LD泵浦掺铒光纤放大器的研究

报道了采用１４７７ｎｍ激光二极管（ＬＤ）泵浦的掺铒光纤放大器的实验结果。研究了放大器的增益和时域特性。对１５２０ｎｍ的信号光，获得了２３ｄＢ的增益，泵浦效率为２．２８ｄＢ／ｍＷ。低频脉冲信号经过放大器后未发生波形畸变。     

Nd：碲酸盐玻璃的光谱和激光性质

对比了各种激光玻璃的光谱性质，指出碲酸盐玻璃是一咱理想的激光介质，并资产在室温下实现了钛宝石激光器泵浦了Ｎｄ：碲酸盐块体玻璃的激光发射，激光阈值４．２０ｍＪ，斜率效率１４．７％。     

RH-KTB耐材长寿技术研究及应用

介绍了宝钢RH-KTB工艺条件下RH用镁铬砖的应用和提高浸渍管管龄、下部槽槽龄的方法.     

TiNi shape memory alloys prepared by normal sintering

This paper covers the use of conventional press and sinter of titanium and nickel equiatomic blends, involving transient liquid phases. A notable development has been the fabrication of homogeneous compacts from the elemental powders. Results indicate that employment of a double-stage sintering cycle is effective to sustain the geometrical integrity of the sintered sample. The TiNi alloy prepared in this manner exhibits a recovery strain of 4.6% by generating a restoring stress of 230 MPa, with a martensitic transformation point M_s of 34 °C.