对乙酰氨基酚的合成与生产

综述了国内外近年来对药物扑热息痛（对乙酰氨基酚）合成与生产方法的研究，主要介绍了二步法、一步法和生化法。提出了无论从经济上还是从环保上考虑，一步催化合成法是当今扑热息痛合成的出路     

挤出机各段温度对开孔型橡塑共混材料性能的影响

研究开孔型橡塑共混材料在不同挤出加工工艺中结构形态及力学性能的变化规律。结果表明，挤出机的机头温度应稍高于发泡剂的分解温度，均化段温度要设在发泡剂分解温度区的低温段，在挤出加工工艺中，要特别注意挤出机均化段温度及机头温度的设定，温度设定不好会使发泡剂无法发挥作用。     

不同结合系统刚玉-方镁石-尖晶石浇注料的性能

对比研究了水泥结合和水合氧化铝结合的刚玉 -方镁石 -尖晶石浇注料的性能。结果表明 :二者相比 ,水合氧化铝结合浇注料的需水量较大 ,流动性较差 ,烧结致密化温度高 ,在 1 5 5 0℃下烧结后的强度和致密度低 ,但其抗热震性能及抗渣性能较好。     

Phase evolution and thermophysical properties of high-entropy RE2(Y0.2Yb0.2Nb0.2Ta0.2Ce0.2)2O7 oxides

Pursuing novel thermal barrier–coating materials with lower thermal conductivity and high-temperature stability can simultaneously improve the working efficiency and service temperature of a gas turbine. In this study, a series of high-entropy RE₂(Y_0.2Yb_0.2Nb_0.2Ta_0.2Ce_0.2)₂O₇ (RE = La, Nd, Sm, Gd, Dy, and Er) oxides were prepared though solid-state reaction. Through tuning the rare-earth cations, an order–disorder transition occurs from certain partially ordered weberite structure (C222₁) to disordered defective fluorite structure (Fm$\overline{3}$m). All the high-entropy RE₂(Y_0.2Yb_0.2Nb_0.2Ta_0.2Ce_0.2)₂O₇ oxides possess low thermal conductivity in the range of 0.91–1.34 W m⁻¹ K⁻¹ at room temperature, which can be attributed to increased lattice anharmonicity and disorder, resulting in additional phonon scattering. Herein, we proved that the incorporation of heterovalent cations at B-sites in high-entropy A₂B₂O₇ crystals is an effective strategy to reduce the thermal conductivity without compromising the decrease of oxygen vacancy. Moreover, the high-entropy RE₂(Y_0.2Yb_0.2Nb_0.2Ta_0.2Ce_0.2)₂O₇ oxides show the relatively higher thermal expansion coefficients of 10.3–10.7 × 10⁻⁶°C⁻¹ and excellent phase stability at elevated temperatures.     

A hybrid recommendation algorithm adapted in e-learning environments

With the rapid development of online learning technology, a huge amount of e-learning materials have been generated which are highly heterogeneous and in various media formats. Besides, e-learning environments are highly dynamic with the ever increasing number of learning resources that are naturally distributed over the network. On the other hand, in the online learning scenario, it is very difficult for users without sufficient background knowledge to choose suitable resources for their learning. In this paper, a hybrid recommender system is proposed to recommend learning items in users’ learning processes. The proposed method consists of two steps: (1) discovering content-related item sets using item-based collaborative filtering (CF), and (2) applying the item sets to sequential pattern mining (SPM) algorithm to filter items according to common learning sequences. The two approaches are combined to recommend potentially useful learning items to guide users in their current learning processes. We also apply the proposed approach to a peer-to-peer learning environment for resource pre-fetching where a central directory of learning items is not available. Experiments are conducted in a centralized and a P2P online learning systems for the evaluation of the proposed method and the results show good performance of it.     

The effect of sputter etching on the surface characteristics of dyed aramid fabrics

Three kinds of aramid fabrics, Technora (modified p-aramid), Conex (m-aramid) and Kevlar (p-aramid), were subjected to sputter etching and argon low-temperature plasma treatments after dyeing in black with disperse dyes. The depth of shade increased considerably on Technora and Kevlar with the sputter etching treatment, but not on Conex fabrics. Argon low-temperature plasma treatment had virtually no effect on the depth of shade on the aramid fabrics.     

Synthesis of superabsorbent resin by ultraviolet photopolymerization

Synthesis of superabsorbent resin (SAR) was achieved by a new method, that of direct UV photopolymerization, and in particular the synthesis of a SAR of acrylic acid–potassium acrylate copolymer by UV photopolymerization was investigated. Influences of ratio (mol) of acrylate monomer to acrylic acid monomer, photoinitiators, crosslinking agents, and exposure time of UV light on the water‐absorbent properties were investigated. The results showed that the water absorbency (Q) of SAR based on Irgacure 1700 or Irgacure 1800 was 545–530 mL/g, but under the same conditions Q was 450 mL/g for the SAR based on Irgacure 651. N,N′‐Methylene bisacrylamide, hydroethyl acrylate, and glycerol were used as crosslinking agents, of which N,N′‐methylene bisacrylamide was the most effective. It crosslinked the molecular chains through attending the copolymerization with acrylic acid (AA) and potassium acrylate. When the exposure time was 5 min, the value of Q was 1368 mL/g (the content of N,N′‐methylene bisacrylamide was 100 ppm). © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1618–1624, 2004     

多台机器下的最小期望延误的随机排序问题

论文针对多台机器下,任务的预期时间为随机变量的排序问题,首先用LPT排序方法把任务安排到不同的机器上,然后用简单的随机方法来确定任务在机器上的特殊加工次序。由于随机预期时间是相互独立的并且服从指数分布,考虑将参数进行最大延误。     

新疆加甫沙尔苏地区中酸性小岩体型矿化蚀变遥感异常提取与找矿

中酸性小岩体的内部及附近的围岩中常形成与岩浆岩体有关的大型、超大型矿床,已成为找矿工作的一个重点方向。由于地质工作程度的限制,中酸性小岩体易被遗漏,严重制约了该类型矿化的发现。在新疆西准噶尔达尔布特断裂带下盘加甫沙尔苏地区找矿工作中,通过综合分析,提出了以遥感手段为主导的中酸性小岩体型矿化找矿模型:利用ASTER数据,通过图像增强处理、图像解译识别中酸性小岩体并提取蚀变遥感异常,结合地质、化探信息综合分析后确定重点检查区域。野外检查发现了加甫沙尔苏斑岩型钼矿化点,证实了该方法的有效性。该方法可以为西部地区中酸性小岩体型矿产资源勘查提供借鉴。