Copper coating on carbon fibres and their composites with aluminium matrix

A uniform and continuous coating of copper was given to carbon fibres by cementation or electroless techniques. In both cases, when coating thicknesses were less than 0.2 m, copper deposition was discontinuous over the fibres, and above 0.2 m, coatings were continuous. In electroless coating, about 75% of the continuously coated fibres had a coating thickness range 0.2–0.5 m and above this showed isolated dendrite deposits of copper. In the cementation process, about 75% of the continuously coated fibres had a coating thickness range 0.2–0.6 m, and above this thickness, fine crystallite-type copper deposition was found over smoothly coated copper. The ultimate tensile strength of continuously electroless-coated fibres were nearer to the uncoated fibres, suggesting defect-free coating, while fibres coated by the cementation process exhibited lower ultimate tensile strength values. The tensile fracture of both electroless- and cementation-coated fibres showed delamination of the coating, suggesting poor bonding between coating and the fibre. In composites, prepared by dispersing the coated chopped fibres in a pure aluminium matrix, uniform and random distribution of the fibres were observed without appreciable fibre-metal interaction. The CuAl₂ intermetallics were largely found in the matrix and only very small amounts were observed at fibre/matrix interfaces. Additions of about 2 wt% Mg to the matrix prior to the fibre dispersion did not appreciably change the distribution pattern of the fibres, but in addition to CuAl₂ phase, Mg₂Si phases were observed in the matrix as well as at the interface.     

石墨防爆片静态变形及应力分析

本文旨在通过对石墨防爆片的变形、应力分布及爆破压力的试验研究,探讨以石墨电极为原材料加工石墨防爆片的可行性。文中运用有限单元法及薄板理论对该防爆破片的应力分布做了初步分析,并以电测和爆破试验验证了以薄板理论为基础的爆破压力计算公式,可供进一步研究时参考。     

Morphology of craters at hypervelocity impact in isotropic composites with inclusions

Results of a study of hypervelocity impact in model disperse-reinforced composites with an epoxy or aluminum matrix with metallic (Al and Pb) or ceramic (SiO₂) inclusions are reported. The goal of the present study is to find materials that possess a higher resistance to penetration of a high-velocity projectile compared with materials of separate components. This resistance is characterized by the ratio of the depth of a crater in a sufficiently thick target to the diameter of a spherical projectile. For two composites studied, we show that in impact of a steel particle with a velocity ranging from3 to11km/sec, the crater depth is approximately one projectile diameter smaller than that for lead or aluminum targets. Lavrent’ev Institute of Hydrodynamics, Siberian Division, Russian Academy of Sciences, Novosibirsk 630090. Translated from Fizika Goreniya i Vzryva, Vol. 33, No. 3, pp. 139–151, May–June, 1997.     

低温固化双马来酰亚胶树脂基体研究──引发剂的作用

本文以典型的ＸＵ２９２双马体系作为研究对象，选用引发剂加速树脂的固化反应，以期得到低温固化耐热的双马树脂体系。研究结果表明，引发剂能很有效地降低双马树脂的固化温度，低温固化阶段比高温固化阶段对树脂耐热性的影响更大。经１２０℃／８ｈ＋１４０℃／２ｈ＋１６０℃／２ｈ固化树脂的热变形温度为２６６℃，再经１８０℃／８ｈ的后处理，热变形温度达到３００℃。     

Stearic acid unlike shorter-chain saturated fatty acids is poorly utilized for triacylglycerol synthesis and β-oxidation in cultured rat hepatocytes

Utilization of stearate as compared to various saturated fatty acids for cholesterol and lipid synthesis and β-oxidation was determined in primary culture of rat hepatocytes. At 0.5 mmol/L in the medium, stearate (18:0) adequately solubilized by albumin was less inhibitory to cholesterol synthesis from [2-¹⁴C] acetate than myristate (14:0) and palmitate (16:0) (68% vs. 91 and 88% inhibition, respectively). The rate of incorporation into cholesterol from [1-¹⁴C] stearate (3.0±0.6 nmol/mg protein/4 h) was 37-, 1.8-, and 7.8-fold of that from myristate, palmitate, and oleate, respectively. Conversely, the rate of [1-¹⁴C] stearate incorporation into total glycerolipids was 88–90% lower than that of labeled palmitate, myristate, and oleate. The rate of [1-¹⁴C] stearate incorporation into triacylglycerol (3.6±0.4 nmol/mg protein/4 h) was 6–8% of that from myristate, palmitate, oleate, and linoleate. The rate of stearate incorporation into phospholipids was the lowest among tested fatty acids, whereas the rate of mono- and diacylglycerol synthesis was the highest with stearate treatment. The rate of β-oxidation as measured by CO₂ and acid soluble metabolite production was also the lowest with [1-¹⁴C] stearate treatment at 22.7 nmol/mg protein/4 h, which was 35–40% of those from other [1-¹⁴C] labeled fatty acids. A greater proportion of stearate than other fatty acids taken up by the hepatocytes remained free and was not metabolized. Clearly, stearate as compared to shorter-chain saturated fatty acids was less efficiently oxidized and esterified to triacylglycerol in cultured rat hepatocytes.     

Multipath effects on vector tracking algorithm for GNSS signal

The vector tracking algorithm uses a single extended Kalman filter （EKF） to predict the time-delays and the Doppler deviations of the GNSS signal, while also estimating the user＇s position, velocity, and clock state. In this paper, the effects of multipath on the tracking performance of the vector delay / frequency lock loop （VDFLL） is studied for better application in the multipath environment. The error expressions of the measurements are given in theory. The tracking error caused by multipath is reduced by VDFLL, which is proved by the tracking error of VDFLL through a new iterating method. The theoretical analysis is verified by the Monte Carlo simulation.     

矿产勘查生产要素配置中政府和市场作用分析

矿产资源是经济社会发展的重要物质基础,是国家安全的战略保障。党的二十大要求“构建全国统一大市场,深化要素市场化改革,建设高标准市场体系”,强调“充分发挥市场在资源配置中的决定性作用,更好发挥政府作用”。本文分析了近年来矿产勘查生产要素配置现状,梳理了矿产勘查中政府和市场关系演变和作用机制,从充分发挥市场决定性作用、构建“有效市场”和更好发挥政府作用、塑造“有为政府”两个方面提出对策建议,以期为充分发挥政府和市场两个主体在矿产勘查生产要素配置中的作用提供一些思路。     

基于云模型与PROMETHEE方法的语言型Z-number多属性决策

针对属性权重未知,属性值为语言型Z-number的多属性决策问题,提出了一种基于云模型与丰富度评估的偏好排序组织方法（Preference ranking organization method for enrichment evaluation, PROMETHEE）的决策方法。首先,引入语言尺度函数,然后利用其建立转化模型完成语言型Z-number向云模型的转化。此外,通过定义云可能度函数,建立属性权重求解公式及构建正弦偏好函数,进而计算方案的优先指数,通过计算方案的正负方向优序级别值得到备选方案综合优序级别值,进而得到方案排序。最后通过算例及比较分析验证本方法的有效性和可行性。     

多层石墨烯的粗粒化分子动力学模型与力学性能

为了有效研究多层石墨烯等石墨烯集合体的力学性能,避免由于实验难度大、全原子计算成本高等带来的困难,基于Tersoff势函数提出一种可用于计算大规模石墨烯的粗粒化分子动力学方法。该方法计算时只需输入原子坐标,大大减少了模型的数据处理,提高了计算效率。通过与全原子模型计算结果比较,本文提出的粗粒化分子动力学方法可以准确预测多层石墨烯的拉伸破坏性能,对制备高性能石墨烯纤维有一定的指导意义。     

基于运行数据的短期风电功率预测误差互补特性探析

随着风电装机容量的不断增加,风电场、风电场集群功率预测误差对调度运行的影响越来越大.当前风电预测误差特性研究主要针对单个风电场,无法满足当前电网调度运行需求.基于此,文中首先统计分析了大量风电场的分布特性,总结了不同规模风电场集群预测误差分布特性的变化规律,探索了集群预测误差概率分布的最佳拟合模型.然后,针对预测误差分布对未来的指导作用,提出了误差分布持续性的评价指标.最后,对风电预测误差研究的作用进行了较为全面的分析,并指出以风电场站集群为单位开展电网调度更具有工程适用性.