船舶舱室正压排烟方案优化及仿真分析

本文主要针对船舶模拟舱室的正压排烟进行研究,以期为现代船舶的消防建设提供参考,将烟控区抽离建模如下文图一,设计正交排烟方案,由实验结果的极差分析得到最优的正压排烟方案即:风速15m/s,出口开度1.2m,进口开度0.3m。针对最优方案,由Fluent仿真分析得到:烟气聚集的地方,温度要高于周围,旋涡的存在导致烟气的滞留,说明针对烟气流动路径的研究将有利于排烟效果的改善。     

Synergistic effects of micro-/nano-fillers on conductive and electromagnetic shielding properties of polypropylene nanocomposites

This study presents the synergistic effects of graphene nanosheets (GNSs) and carbon fibers (CFs) additions on the electrical and electromagnetic shielding properties of GNS/CF/polypropylene (PP) composites. These composites were fabricated by the melt blending of different ratios of GNSs and CFs (20:0, 15:5, 10:10, 5:15 and 0:20 wt/wt%) into a PP polymer matrix using a Brabender mixer. Besides, the chemical and crystalline structures and the thermal stability of the resultant GNS/CF/PP composites were characterized by Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD) and thermogravimetric analysis (TGA). FT-IR and XRD showed that with the addition of GNSs content, transmittances at 1373.4?cm^?1 and 1454.4?cm^?1 became smaller and the characteristic peak at 26.82° became stronger. TGA showed that the GNS/CF/PP composite can be used at high temperature below 456°C. Blending 10?wt% CFs and 10?wt% GNSs into the PP polymer resulted in excellent conductivity (0.397 S/cm), which indicated the occurrence of the critical percolation threshold phenomenon, and also reached the maximum electromagnetic shielding effectiveness (EMSE) of 20?dB at 1.28–2.00?GHz. Laminated with five layers of composites, its EMSE achieved 25–38?dB at 0.3–3.0?GHz, corresponding to blocking of 94.38–98.74% electromagnetic waves.     

Monitoring the Dynamic Process of Formation of Plasmonic Molecular Junctions during Single Nanoparticle Collisions

The capability to study the dynamic formation of plasmonic molecular junction is of fundamental importance, and it will provide new insights into molecular electronics/plasmonics, single‐entity electrochemistry, and nanooptoelectronics. Here, a facile method to form plasmonic molecular junctions is reported by utilizing single gold nanoparticle (NP) collision events at a highly curved gold nanoelectrode modified with a self‐assembled monolayer. By using time‐resolved electrochemical current measurement and surface‐enhanced Raman scattering spectroscopy, the current changes and the evolution of interfacial chemical bonding are successfully observed in the newly formed molecular tunnel junctions during and after the gold NP “hit‐n‐stay” and “hit‐n‐run” collision events. The results lead to an in‐depth understanding of the single NP motion and the associated molecular level changes during the formation of the plasmonic molecular junctions in a single NP collision event. This method also provides a new platform to study molecular changes at the single molecule level during electron transport in a dynamic molecular tunnel junction.     

Computational Parametric Analysis of Cellular Solids with the Miura-Ori Metamaterial Geometry under Quasistatic Compressive Loads

Origami-based metamaterials have widespread application prospects in various industries including aerospace, automotive, flexible electronics, and civil engineering structures. Among the wide range of origami patterns, the fourfold tessellation known as Miura-ori is of particular attraction to engineers and designers. More specifically, researchers have proposed different 3D structures and metamaterials based on the geometric characteristics of this classic origami pattern. Herein, a computational modeling approach for the design and evaluation of 3D cellular solids with the Miura-ori metamaterial geometry which can be of zero or nonzero thicknesses is presented. To this end, first, a range of design alternatives generated based on a numerical parametric model is designed. Next, their mechanical properties and failure behavior under quasistatic axial compressive loads along three perpendicular directions are analyzed. Then, the effects of various geometric parameters on their energy absorption behavior under compression in the most appropriate direction are investigated. The findings of this study provide a basis for future experimental investigations and the potential application of such cellular solids for energy-absorbing purposes.     

Genetic interacting multiple model algorithm based on <Emphasis Type="Italic">H</Emphasis><Subscript>∞</Subscript> filter for maneuvering target tracking

In order to have a good performance for maneuvering target tracking, a genetic interacting multiple model (GIMM) algorithm based on the H _∞ filter is proposed in this paper. It introduces the H _∞ filter as model-conditional filter, which keeps its robustness by constantly adjusting parameters, to improve the performance and the precision. Meanwhile, it optimizes model probabilities using the genetic algorithm (GA), chooses sub-models which are close to true models from a set of models, adjusts the number of models and parameters in real-time, reduces excessive competition, and improves the performance of the algorithm. The simulation results indicate that, the algorithm has higher tracking accuracy and stronger robustness than the standard IMM algorithm.     

Implementation and evaluation of parallel FFT on Engineering and Scientific Computation Accelerator (ESCA) architecture

The fast Fourier transform (FFT) is a fundamental kernel of many computation-intensive scientific applications.This paper deals with an implementation of the FFT on the accelerator system,a heterogeneous multi-core architecture to accelerate computation-intensive parallel computing in scientific and engineering applications.The Engineering and Scientific Computation Accelerator (ESCA) consists of a control unit and a single instruction multiple data (SIMD) processing element (PE) array,in which PEs communicate with each other via a hierarchical two-level network-on-chip (NoC) with high bandwidth and low latency.We exploit the architecture features of ESCA to implement a parallel FFT algorithm efficiently.Experimental results show that both the proposed parallel FFT algorithm and the ESCA architecture are scalable.The 16-bit fixed-point parallel FFT performance of ESCA is compared with a published work to prove the superiority of the mapping algorithm and the hardware architecture.The floating-point parallel FFT performances of ESCA are evaluated and compared with those of the IBM Cell processor and GPU to demonstrate the computing power of the ESCA system for high performance applications.     

Research on the group decision-making about emergency event based on network technology

In order to improve decision-making efficiency about emergency event, this paper proposes a novel concept, i.e., Agile-Delphi Method, which is an integration of agile decision and Delphi Method implicating that the decision-makers instantly deliver, respond, treat, and utilize information via Delphi process while conducting group decision-making about emergency event. The paper details the mechanism of group decision-making about emergency event based on network technology and Agile-Delphi Method. Finally, the paper conducts an empiric analysis taking the “111 event”, i.e., the liquid ammonia spill event happened on November 1, 2006 in a phosphorus chemical company in China, as an example.     

基于HLA的卫星协同仿真系统研究与实现

基于HLA体系规范,研究协同仿真软件体系结构,设计了一个卫星协同仿真系统CSS(Coordinated Simulation System).首先简要介绍了系统研究的意义,以系统功能以及系统要素为基础分析了系统的需求、提出了基于"协同"的设计原则以及系统性能评估指标,然后介绍了实现CSS的关键技术--使命空间的任务体现结构和多分辨率建模技术 ,以及CSS的分层设计的系统结构,并以仿真任务管理成员和卫星成员为例分析了设计CSS联邦成员的设计思路,最后提出了一个原型系统.该系统仿真了卫星侦查、数据通信、数据评估等整个过程对大型复杂系统的仿真具有很好的借鉴意义.     

一种有效的新预条件Gauss-Seidel迭代法

为了改善古典迭代法的收敛速度,本文提出一种带参数的新预条件方法,并对参数的选择给出必要条件,证明了对于非奇异不可约M一矩阵,新预条件方法收敛且可以加速Gauss—Seidel迭代法的收敛速度,数值例子表明新预条件方法是有效的．